RC2012J624CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012J624CS is a 620 kOhms ±5% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status with RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). The part is supplied in Tape & Reel packaging with 701 pieces currently in stock inventory.

Equivalent and substitute parts are identified when design requirements permit tolerance upgrades, alternative packaging formats, or manufacturer substitution while maintaining electrical and mechanical compatibility within the 0805 form factor and 620 kOhms resistance specification.

Substiute Parts

RC2012J624CS

Samsung Electro-MechanicsIn Stock: 716RC2012J624CS Datasheet

Current PartRFQ

RC0805JR-07620KL

YAGEOIn Stock: 7571RC0805JR-07620KL Datasheet

DirectRFQ

ERJ-6ENF6203V

Panasonic Electronic ComponentsIn Stock: 72421ERJ-6ENF6203V Datasheet

UpgradeRFQ

RC0805FR-07620KL

YAGEOIn Stock: 171593RC0805FR-07620KL Datasheet

UpgradeRFQ

RMCF0805FT620K

Stackpole Electronics IncIn Stock: 5589RMCF0805FT620K Datasheet

UpgradeRFQ

CRCW0805620KFKEA

Vishay DaleIn Stock: 31888CRCW0805620KFKEA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for RC2012J624CS are categorized based on the following substitution logic:

Direct Equivalent (Same Tolerance): Parts maintaining ±5% tolerance with identical electrical and mechanical specifications. These provide one-to-one replacement capability without circuit performance modification.

Upgrade Equivalents (Improved Tolerance): Parts with ±1% tolerance instead of ±5%, offering superior accuracy while maintaining all other electrical parameters (620 kOhms, 0.125W, -55°C ~ 155°C, ±100ppm/°C). These are suitable when design margins permit tolerance improvement or when circuit performance benefits from tighter resistance specification.

Similar Equivalents (Alternative Certifications): Parts with ±1% tolerance and automotive AEC-Q200 qualification, providing enhanced reliability grading for automotive and industrial applications while maintaining core electrical specifications.

All substitute parts share the following fixed parameters with the main part:

• Resistance: 620 kOhms
• Power Rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature: -55°C ~ 155°C
• RoHS3 Compliance
• MSL 1 (Unlimited)
• 2 Terminations

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent Selection: RC0805JR-07620KL (YAGEO) provides direct substitution with identical ±5% tolerance specification. This part maintains all electrical and mechanical parameters of the main part RC2012J624CS while offering higher inventory availability (7549 pieces) and slightly reduced maximum height (0.60mm vs 0.65mm). Selection is appropriate for applications where tolerance specification is a fixed design requirement.

Tolerance Upgrade Selection: RC0805FR-07620KL (YAGEO) offers ±1% tolerance upgrade with moisture resistant features and identical operating temperature range. This part is suitable when circuit design permits tolerance improvement and requires Cut Tape or Digi-Reel packaging format. Inventory availability is substantial (171567 pieces).

Automotive-Qualified Selection: ERJ-6ENF6203V (Panasonic) and RMCF0805FT620K (Stackpole) both provide ±1% tolerance with AEC-Q200 automotive qualification. These parts are appropriate for automotive, industrial, or high-reliability applications requiring enhanced component grading. CRCW0805620KFKEA (Vishay Dale) provides the same automotive qualification with the lowest maximum height specification (0.50mm).

All substitute parts maintain RoHS3 compliance, MSL 1 rating, and identical electrical specifications (620 kOhms, 0.125W, ±100ppm/°C, -55°C ~ 155°C operating range).

Frequently Asked Questions (FAQ)

Q: Can RC0805JR-07620KL replace RC2012J624CS in any application? A: RC0805JR-07620KL is a direct equivalent with identical ±5% tolerance and all electrical specifications. It is suitable for direct replacement in applications where the original part specification is maintained. The slightly reduced maximum height (0.60mm vs 0.65mm) is compatible with standard 0805 PCB layouts.

Q: What is the difference between direct equivalents and upgrade equivalents? A: Direct equivalents (RC0805JR-07620KL) maintain the original ±5% tolerance specification. Upgrade equivalents (RC0805FR-07620KL, ERJ-6ENF6203V, RMCF0805FT620K, CRCW0805620KFKEA) provide ±1% tolerance, offering improved accuracy. Upgrade equivalents are suitable when circuit design permits or requires tighter tolerance specifications.

Q: Are automotive-qualified parts (AEC-Q200) suitable for non-automotive applications? A: Automotive-qualified parts (ERJ-6ENF6203V, RMCF0805FT620K, CRCW0805620KFKEA) meet enhanced reliability and qualification standards. These parts are suitable for any application and provide additional assurance of component quality and consistency. Selection is appropriate for high-reliability, industrial, or mission-critical applications.

Q: What packaging format differences exist among substitute parts? A: RC2012J624CS, RC0805JR-07620KL, ERJ-6ENF6203V, RMCF0805FT620K, and CRCW0805620KFKEA are supplied in Tape & Reel (TR) format. RC0805FR-07620KL is supplied in Cut Tape (CT) & Digi-Reel format. All parts are compatible with standard automated assembly equipment. Packaging selection depends on production volume and assembly process requirements.

Q: Do all substitute parts have the same height specification? A: Maximum seated heights vary slightly: RC2012J624CS (0.65mm), RC0805JR-07620KL (0.60mm), ERJ-6ENF6203V (0.70mm), RC0805FR-07620KL (0.60mm), RMCF0805FT620K (0.65mm), CRCW0805620KFKEA (0.50mm). All heights are within standard 0805 package specifications and compatible with typical PCB designs. Height differences are not significant for standard applications.

Q: Can I use a ±1% tolerance part in place of a ±5% tolerance specification? A: Yes. A ±1% tolerance part meets or exceeds a ±5% tolerance requirement. The tighter tolerance provides improved accuracy and is suitable for any application originally specified with ±5% tolerance. No circuit redesign is required.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed substitute parts maintain RoHS3 compliance and MSL 1 (Unlimited) moisture sensitivity level, matching the original RC2012J624CS specification.