RC2012J564CS 560kΩ 0805 SMD Chip Resistor Equivalent & Substitute Parts

Part Overview

The RC2012J564CS is a 560 kΩ ±5% thick film chip resistor in 0805 (2012 metric) package manufactured by Samsung Electro-Mechanics. This component is rated for 0.125W (1/8W) power dissipation with moisture-resistant construction and operates across -55°C to 155°C. The part is ROHS3 compliant and carries MSL Level 1 (unlimited moisture sensitivity). Substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating, temperature coefficient) and mechanical compatibility (package size, termination count, height).

Key Parameters

Parameter	Value
Resistance	560 kΩ
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Number of Terminations	2

Substitute Part Grouping Explanation

Substitute parts for the RC2012J564CS are classified into three categories based on electrical and mechanical compatibility:

Direct Substitutes (Equivalent Tolerance): Parts matching the ±5% tolerance specification with identical 0.125W power rating, 560 kΩ resistance, and 0805 package. These provide form-fit-function equivalence.

Upgrade Substitutes (Improved Tolerance): Parts with ±1% tolerance (tighter than original ±5%), maintaining 560 kΩ resistance, 0.125W power rating, and 0805 package. These offer enhanced precision while remaining mechanically and electrically compatible.

Similar Substitutes (Modified Power Rating): Parts with 560 kΩ resistance, ±1% tolerance, and 0805 package but with increased 0.5W (1/2W) power rating. These are suitable only when higher power dissipation capacity is required or acceptable in the application.

Substitution eligibility is determined by:

Resistance value: 560 kΩ (exact match required)
Package / Case: 0805 (2012 Metric) (exact match required)
Temperature Coefficient: ±100ppm/°C (exact match required)
Operating Temperature Range: -55°C to 155°C (exact match required)
Composition: Thick Film (exact match required)
Number of Terminations: 2 (exact match required)
RoHS Status: ROHS3 Compliant (exact match required)
MSL Level: 1 (Unlimited) (exact match required)

Tolerance and power rating may vary within defined upgrade or similar categories.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Op Temp Range (°C)	Package	Height Max (mm)	Features	Product Status
RC2012J564CS	Samsung Electro-Mechanics	560 kΩ	±5%	0.125	±100	-55 to 155	0805	0.65	Moisture Resistant	Active
RC0805JR-07560KL	YAGEO	560 kΩ	±5%	0.125	±100	-55 to 155	0805	0.60	Moisture Resistant	Active
CRG0805F560K	TE Connectivity Passive Product	560 kΩ	±1%	0.125	±100	-55 to 155	0805	0.65	—	Active
ERJ-6ENF5603V	Panasonic Electronic Components	560 kΩ	±1%	0.125	±100	-55 to 155	0805	0.70	Automotive AEC-Q200	Active
KTR10EZPF5603	Rohm Semiconductor	560 kΩ	±1%	0.125	±100	-55 to 155	0805	0.65	Automotive AEC-Q200, High Voltage	Active
MCR10ERTF5603	Rohm Semiconductor	560 kΩ	±1%	0.125	±100	-55 to 155	0805	0.65	—	Discontinued at DiGi Electronics
RC0805FR-07560KL	YAGEO	560 kΩ	±1%	0.125	±100	-55 to 155	0805	0.60	Moisture Resistant	Active
RMCF0805FT560K	Stackpole Electronics Inc	560 kΩ	±1%	0.125	±100	-55 to 155	0805	0.65	Automotive AEC-Q200	Active
CRCW0805560KFKEA	Vishay Dale	560 kΩ	±1%	0.125	±100	-55 to 155	0805	0.50	Automotive AEC-Q200	Active
CRCW0805560KFKEAHP	Vishay Dale	560 kΩ	±1%	0.5	±100	-55 to 155	0805	0.50	Automotive AEC-Q200, Pulse Withstanding	Active
ERJ-UP6F5603V	Panasonic Electronic Components	560 kΩ	±1%	0.5	±100	-55 to 155	0805	0.70	Anti-Sulfur, Automotive AEC-Q200, Pulse Withstanding	Active

Engineering Selection Recommendations

For Direct Substitution (±5% Tolerance, 0.125W):

RC0805JR-07560KL (YAGEO) is the primary direct substitute. It maintains ±5% tolerance and 0.125W power rating with identical electrical specifications. The part is Active status with high inventory availability (38,325 pcs). Packaging is Cut Tape (CT) & Digi-Reel® versus the original Tape & Reel (TR).

For Upgrade Selection (±1% Tolerance, 0.125W):

RC0805FR-07560KL (YAGEO) provides ±1% tolerance improvement while maintaining 0.125W power rating and moisture-resistant composition. This part is Active with the highest inventory (184,317 pcs) and offers the lowest seated height (0.60mm). Packaging is Cut Tape (CT) & Digi-Reel®.

CRG0805F560K (TE Connectivity Passive Product) offers ±1% tolerance with Active status and 20,265 pcs inventory. Packaging is Tape & Reel (TR), matching the original.

CRCW0805560KFKEA (Vishay Dale) provides ±1% tolerance with Automotive AEC-Q200 certification and the lowest seated height (0.50mm). Active status with 21,052 pcs inventory.

For Automotive Applications (AEC-Q200 Certified):

ERJ-6ENF5603V (Panasonic Electronic Components), KTR10EZPF5603 (Rohm Semiconductor), RMCF0805FT560K (Stackpole Electronics Inc), and CRCW0805560KFKEA (Vishay Dale) all carry AEC-Q200 certification with ±1% tolerance and 0.125W rating. All are Active status.

For Higher Power Dissipation (0.5W, 1/2W):

CRCW0805560KFKEAHP (Vishay Dale) and ERJ-UP6F5603V (Panasonic Electronic Components) provide 0.5W power rating with ±1% tolerance. These are suitable only when application requirements permit or require increased power handling. Both are Active status.

Parts to Avoid:

MCR10ERTF5603 (Rohm Semiconductor) is Discontinued at DiGi Electronics and should not be selected for new designs despite meeting electrical specifications.

Frequently Asked Questions (FAQ)

Q: Can RC0805JR-07560KL replace RC2012J564CS directly?

A: Yes. RC0805JR-07560KL is a direct substitute with matching ±5% tolerance, 0.125W power rating, 560 kΩ resistance, and 0805 package. All electrical and mechanical parameters are equivalent. The only difference is packaging format (Cut Tape & Digi-Reel® versus Tape & Reel).

Q: What is the difference between direct substitutes and upgrade substitutes?

A: Direct substitutes maintain the original ±5% tolerance. Upgrade substitutes offer ±1% tolerance, providing tighter resistance accuracy. Both categories maintain identical 560 kΩ resistance, 0.125W power rating, and 0805 package. Upgrade substitutes are electrically and mechanically compatible but provide improved precision.

Q: Can I use CRCW0805560KFKEAHP (0.5W) in place of RC2012J564CS (0.125W)?

A: CRCW0805560KFKEAHP is mechanically and electrically compatible in terms of resistance, tolerance, package, and temperature range. However, it has a higher power rating (0.5W versus 0.125W). This substitution is valid only if the application circuit can accommodate the higher power rating or if increased power dissipation capacity is beneficial. The component will not be damaged by lower power dissipation, but it represents over-specification.

Q: What does AEC-Q200 certification mean?

A: AEC-Q200 is an automotive qualification standard for passive components. Parts carrying this certification (ERJ-6ENF5603V, KTR10EZPF5603, RMCF0805FT560K, CRCW0805560KFKEA, ERJ-UP6F5603V) meet automotive reliability and performance requirements. These parts are suitable for automotive applications and general industrial use.

Q: Does seated height matter for substitution?

A: Seated height differences (ranging from 0.50mm to 0.70mm in the substitute list) are generally not critical for 0805 components in standard PCB assembly. However, in space-constrained applications or designs with specific height limitations, verify that the substitute part's maximum seated height is acceptable. CRCW0805560KFKEA and CRCW0805560KFKEAHP offer the lowest height (0.50mm).

Q: Why is MCR10ERTF5603 listed if it is discontinued?

A: MCR10ERTF5603 meets all electrical and mechanical specifications but is marked as Discontinued at DiGi Electronics. It should not be selected for new designs or long-term production due to supply uncertainty. Active alternatives with identical specifications are available.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® packaging?

A: Both are standard SMD packaging formats. Tape & Reel (TR) is continuous reel packaging suitable for high-volume automated assembly. Cut Tape (CT) & Digi-Reel® is pre-cut tape suitable for lower-volume or mixed-component assembly. Electrical and mechanical performance are identical; packaging choice depends on assembly process requirements.

Q: Can I substitute based on tolerance alone?

A: No. Tolerance is one parameter among many. Valid substitution requires matching all critical parameters: resistance value (560 kΩ), package (0805), composition (thick film), temperature coefficient (±100ppm/°C), operating temperature range (-55°C to 155°C), and compliance status (ROHS3, MSL Level 1). Tolerance may vary within defined upgrade or similar categories, but all other parameters must match exactly.

Q: Is moisture-resistant composition required for substitution?

A: The original RC2012J564CS specifies moisture-resistant composition. Direct substitutes should maintain this feature (RC0805JR-07560KL). However, upgrade substitutes like CRG0805F560K do not explicitly list moisture resistance. If moisture resistance is a design requirement, select substitutes that explicitly specify this feature (RC0805FR-07560KL, RC0805JR-07560KL).

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message