Request Quote
(Ships tomorrow)
RC2012J511CS Equivalent & Substitute Parts Reference
Part Overview
The RC2012J511CS is a 510 Ohm ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format with 0.125W power rating. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). The part is designed for general-purpose applications requiring moisture-resistant thick film construction across industrial and commercial temperature ranges (-55°C to 155°C).
Equivalent and substitute parts are identified based on matching core electrical specifications: 510 Ohm resistance value, 0805 package geometry, 0.125W power dissipation capability, and thick film composition. Substitute availability becomes necessary for supply chain continuity, design flexibility across manufacturing sources, or when upgraded tolerance specifications are required for precision applications.
Substiute Parts
Key Parameters
| Parameter | Value | Specification Basis |
|---|---|---|
| Resistance | 510 Ohms | Core electrical specification |
| Tolerance | ±5% | Accuracy classification |
| Power Rating | 0.125W (1/8W) | Thermal dissipation capability |
| Package / Case | 0805 (2012 Metric) | Physical form factor |
| Composition | Thick Film | Construction technology |
| Temperature Coefficient | ±100ppm/°C | Stability specification |
| Operating Temperature Range | -55°C to 155°C | Environmental limits |
| Moisture Sensitivity Level | MSL 1 (Unlimited) | Handling classification |
| RoHS Status | ROHS3 Compliant | Environmental regulation |
Substitute Part Grouping Explanation
Substitution logic for the RC2012J511CS is structured into three categories based on electrical and mechanical compatibility:
Direct Equivalents (Tolerance ±5%, Power 0.125W): Parts maintaining identical tolerance specification and power rating. These provide pin-for-pin, footprint-compatible replacement without circuit redesign. Electrical performance characteristics remain within the same tolerance band.
Upgrade Substitutes (Tolerance ±1%, Power 0.125W): Parts offering improved tolerance specification (±1% versus ±5%) while maintaining 0.125W power rating and 0805 package. These are suitable for applications requiring higher accuracy without physical redesign. Some variants include automotive AEC-Q200 qualification or additional features (high voltage, pulse withstanding).
Similar Parts (Alternative Specifications): Parts with matching 510 Ohm resistance and 0805 package but differing in tolerance or power rating. The CRCW0805510RFKEAHP variant provides 0.5W power rating in the same package footprint, suitable for higher dissipation requirements.
Key Parameters Determining Substitutability:
- Resistance value: 510 Ohms (exact match required)
- Package: 0805 (2012 Metric) (exact match required)
- Temperature coefficient: ±100ppm/°C (all parts match)
- Operating temperature: -55°C to 155°C (all parts match)
- Composition: Thick film (all parts match)
- Tolerance: ±5% (main part) or ±1% (upgrades)
- Power rating: 0.125W (main and most upgrades) or 0.5W (variant)
Parameter Comparison
| Manufacturer Part Number | Manufacturer | Resistance | Tolerance | Power (W) | Package | Temp Coeff | Op. Temp Range | Features | Compliance |
|---|---|---|---|---|---|---|---|---|---|
| RC2012J511CS | Samsung Electro-Mechanics | 510 Ω | ±5% | 0.125 | 0805 | ±100ppm/°C | -55 to 155°C | Moisture Resistant | ROHS3, MSL 1 |
| RC0805JR-07510RL | YAGEO | 510 Ω | ±5% | 0.125 | 0805 | ±100ppm/°C | -55 to 155°C | Moisture Resistant | ROHS3, MSL 1 |
| AC0805FR-07510RL | YAGEO | 510 Ω | ±1% | 0.125 | 0805 | ±100ppm/°C | -55 to 155°C | Automotive AEC-Q200, Moisture Resistant | ROHS3, MSL 1 |
| CRG0805F510R | TE Connectivity Passive Product | 510 Ω | ±1% | 0.125 | 0805 | ±100ppm/°C | -55 to 155°C | Neohm Series | ROHS3, MSL 1 |
| ERJ-6ENF5100V | Panasonic Electronic Components | 510 Ω | ±1% | 0.125 | 0805 | ±100ppm/°C | -55 to 155°C | Automotive AEC-Q200 | ROHS3, MSL 1 |
| KTR10EZPF5100 | Rohm Semiconductor | 510 Ω | ±1% | 0.125 | 0805 | ±100ppm/°C | -55 to 155°C | Automotive AEC-Q200, High Voltage | ROHS3, MSL 1 |
| RC0805FR-07510RL | YAGEO | 510 Ω | ±1% | 0.125 | 0805 | ±100ppm/°C | -55 to 155°C | Moisture Resistant | ROHS3, MSL 1 |
| RMCF0805FT510R | Stackpole Electronics Inc | 510 Ω | ±1% | 0.125 | 0805 | ±100ppm/°C | -55 to 155°C | Automotive AEC-Q200 | ROHS3, MSL 1 |
| AC0805JR-07510RL | YAGEO | 510 Ω | ±5% | 0.125 | 0805 | ±100ppm/°C | -55 to 155°C | Automotive AEC-Q200, Moisture Resistant | ROHS3, MSL 1 |
| CRCW0805510RFKEA | Vishay Dale | 510 Ω | ±1% | 0.125 | 0805 | ±100ppm/°C | -55 to 155°C | Automotive AEC-Q200 | ROHS3, MSL 1 |
| CRCW0805510RFKEAHP | Vishay Dale | 510 Ω | ±1% | 0.5 | 0805 | ±100ppm/°C | -55 to 155°C | Automotive AEC-Q200, Pulse Withstanding | ROHS3, MSL 1 |
Engineering Selection Recommendations
Direct Equivalent Selection (RC0805JR-07510RL): The YAGEO RC0805JR-07510RL maintains identical electrical specifications (510 Ω ±5%, 0.125W) and package format as the RC2012J511CS. This part is suitable for direct substitution in applications where tolerance specification and power rating are the primary design constraints. Both parts carry Active product status, ROHS3 compliance, and MSL 1 rating.
Upgrade Substitute Selection (±1% Tolerance Options): For applications requiring improved tolerance accuracy, six upgrade options are available with ±1% specification: AC0805FR-07510RL, CRG0805F510R, ERJ-6ENF5100V, KTR10EZPF5100, RC0805FR-07510RL, and RMCF0805FT510R. All maintain 0.125W power rating and 0805 package compatibility. Selection among these upgrades depends on additional feature requirements:
- Automotive AEC-Q200 Qualified: AC0805FR-07510RL, ERJ-6ENF5100V, KTR10EZPF5100, RMCF0805FT510R, CRCW0805510RFKEA
- High Voltage Capability: KTR10EZPF5100
- Moisture Resistant Feature: AC0805FR-07510RL, RC0805FR-07510RL
- Standard Industrial Grade: CRG0805F510R
Similar Part with Enhanced Power Rating (CRCW0805510RFKEAHP): The Vishay Dale CRCW0805510RFKEAHP provides 0.5W power dissipation in the same 0805 package footprint. This variant is applicable only when circuit design requires higher thermal dissipation capacity than the standard 0.125W rating. Physical footprint remains compatible with 0805 PCB layouts.
Compliance Verification: All listed substitutes maintain ROHS3 compliance and MSL 1 (unlimited) moisture sensitivity level, ensuring regulatory and handling compatibility with the original RC2012J511CS specification.
Frequently Asked Questions (FAQ)
Q: Can RC0805JR-07510RL replace RC2012J511CS directly without circuit modification?
A: Yes. The RC0805JR-07510RL is a direct equivalent with matching 510 Ω resistance, ±5% tolerance, 0.125W power rating, and 0805 package. No circuit redesign is required. Both parts share identical electrical performance characteristics and environmental specifications.
Q: What is the difference between direct equivalents and upgrade substitutes?
A: Direct equivalents (RC0805JR-07510RL, AC0805JR-07510RL) maintain the ±5% tolerance specification of the original part. Upgrade substitutes offer improved ±1% tolerance accuracy while preserving the 0.125W power rating and 0805 package. Upgrade substitutes are suitable for precision applications but do not require circuit modification due to maintained package and power specifications.
Q: Are automotive AEC-Q200 qualified parts suitable for non-automotive applications?
A: Yes. Automotive AEC-Q200 qualification indicates enhanced reliability testing and quality standards. These parts (AC0805FR-07510RL, ERJ-6ENF5100V, KTR10EZPF5100, RMCF0805FT510R, CRCW0805510RFKEA) are fully compatible with industrial and commercial applications and provide additional quality assurance.
Q: When should CRCW0805510RFKEAHP (0.5W variant) be selected?
A: The CRCW0805510RFKEAHP is selected only when circuit design requires power dissipation exceeding 0.125W. The 0.5W rating provides four times the thermal capacity in the same 0805 footprint. This substitution requires verification that the circuit design can accommodate the higher power rating specification.
Q: Do all substitute parts maintain the same moisture sensitivity level?
A: Yes. All listed substitutes carry MSL 1 (Unlimited) rating, identical to the RC2012J511CS. This ensures equivalent handling, storage, and reflow soldering requirements across all substitute options.
Q: What packaging formats are available for these substitutes?
A: Substitute parts are available in two packaging formats: Tape & Reel (TR) for automated assembly and Cut Tape (CT) with Digi-Reel® for manual or mixed-volume applications. Packaging format selection depends on manufacturing process requirements and does not affect electrical compatibility.
Q: Are there inventory considerations when selecting substitutes?
A: Inventory availability varies by manufacturer and distributor. The provided data indicates current stock levels for each part number. Selection should account for supply chain requirements and lead time considerations specific to manufacturing schedules.
Q: Can parts with different temperature coefficients be substituted?
A: All listed substitutes maintain ±100ppm/°C temperature coefficient, matching the RC2012J511CS specification. No substitution with different temperature coefficient values is included in this reference, ensuring thermal stability consistency across all options.
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts