RC2012J510CS 51 Ohm 0805 SMD Resistor Equivalent & Substitute Parts

Part Overview

The RC2012J510CS is a 51 Ohm ±5% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with moisture resistant characteristics and ROHS3 compliance. Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating) and mechanical compatibility (package size, termination type, height constraints). Alternative sources become necessary for supply chain continuity, extended lead times, or design optimization requirements.

Key Parameters

Parameter	Value	Specification Basis
Resistance	51 Ohms	Core electrical specification
Tolerance	±5%	Accuracy requirement for substitution
Power Rating	0.125W (1/8W)	Thermal dissipation capability
Package / Case	0805 (2012 Metric)	Physical footprint and PCB compatibility
Composition	Thick Film	Technology type
Temperature Coefficient	±100ppm/°C	Stability over operating range
Operating Temperature	-55°C ~ 155°C	Environmental operating limits
Moisture Sensitivity Level	MSL 1 (Unlimited)	Handling and storage requirements
RoHS Status	ROHS3 Compliant	Regulatory compliance

Substitute Part Grouping Explanation

Substitute parts are classified into three categories based on electrical and mechanical compatibility with RC2012J510CS:

Direct Equivalent (Tolerance ±5%, Power 0.125W): Parts maintaining identical tolerance and power specifications. These provide one-to-one functional replacement without circuit performance alteration.

Upgrade Parts (Tolerance ±1%, Power 0.125W): Parts with improved tolerance specification (±1% versus ±5%) while maintaining identical power rating and package. These offer enhanced accuracy for precision applications.

Similar Parts (Alternative Tolerance or Power): Parts with modified tolerance or power rating specifications. These require circuit-level evaluation for suitability.

Substitution eligibility is determined by:

Resistance value: 51 Ohms (exact match required)
Package / Case: 0805 (2012 Metric) (exact match required)
Power rating: 0.125W minimum (equal or higher acceptable)
Tolerance: ±5% minimum (equal or tighter acceptable)
Temperature coefficient: ±100ppm/°C (matching specification)
Operating temperature range: -55°C ~ 155°C minimum (equal or wider acceptable)
Composition: Thick Film (matching specification)
Terminations: 2 (exact match required)

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff	Op Temp (°C)	Height Max (mm)	Packaging	Substitution Type
RC2012J510CS	Samsung Electro-Mechanics	51 Ω	±5%	0.125	±100ppm/°C	-55 ~ 155	0.65	Cut Tape (CT)	Main Part
RC0805JR-0751RL	YAGEO	51 Ω	±5%	0.125	±100ppm/°C	-55 ~ 155	0.60	Cut Tape (CT) & Digi-Reel®	Direct Equivalent
AC0805FR-0751RL	YAGEO	51 Ω	±1%	0.125	±100ppm/°C	-55 ~ 155	0.60	Tape & Reel (TR)	Upgrade
CR0805-FX-51R0ELF	Bourns Inc.	51 Ω	±1%	0.125	±100ppm/°C	-55 ~ 155	0.60	Tape & Reel (TR)	Upgrade
ERJ-6ENF51R0V	Panasonic Electronic Components	51 Ω	±1%	0.125	±100ppm/°C	-55 ~ 155	0.70	Tape & Reel (TR)	Upgrade
KTR10EZPF51R0	Rohm Semiconductor	51 Ω	±1%	0.125	±100ppm/°C	-55 ~ 155	0.65	Tape & Reel (TR)	Upgrade
RC0805FR-0751RL	YAGEO	51 Ω	±1%	0.125	±100ppm/°C	-55 ~ 155	0.60	Tape & Reel (TR)	Upgrade
RMCF0805FT51R0	Stackpole Electronics Inc	51 Ω	±1%	0.125	±100ppm/°C	-55 ~ 155	0.65	Tape & Reel (TR)	Upgrade
AC0805JR-0751RL	YAGEO	51 Ω	±5%	0.125	±100ppm/°C	-55 ~ 155	0.60	Tape & Reel (TR)	Similar
CRCW080551R0FKEA	Vishay Dale	51 Ω	±1%	0.125	±100ppm/°C	-55 ~ 155	0.50	Cut Tape (CT) & Digi-Reel®	Similar
CRCW080551R0FKEAHP	Vishay Dale	51 Ω	±1%	0.5	±100ppm/°C	-55 ~ 155	0.50	Cut Tape (CT) & Digi-Reel®	Similar

Engineering Selection Recommendations

For Direct Replacement (RC0805JR-0751RL): This YAGEO part maintains identical electrical specifications (51 Ohms ±5%, 0.125W) and package dimensions. Selection is appropriate for applications requiring equivalent performance without tolerance improvement. Inventory availability (288,972 pcs) supports production continuity.

For Tolerance-Improved Applications (AC0805FR-0751RL, RC0805FR-0751RL, CR0805-FX-51R0ELF, RMCF0805FT51R0): These ±1% tolerance parts provide enhanced accuracy over the original ±5% specification while maintaining 0.125W power rating and 0805 package. Selection applies to precision circuits where tighter resistance tolerance improves overall system performance. All parts maintain ROHS3 compliance and -55°C ~ 155°C operating range.

For Automotive Applications (AC0805FR-0751RL, ERJ-6ENF51R0V, RMCF0805FT51R0, CRCW080551R0FKEA): These parts carry AEC-Q200 automotive qualification. Selection is mandatory for automotive-grade designs or applications requiring automotive-level reliability standards.

For High-Voltage Applications (KTR10EZPF51R0): This Rohm Semiconductor part includes high-voltage capability with AEC-Q200 qualification. Selection applies to circuits requiring enhanced voltage stress handling.

For Higher Power Dissipation (CRCW080551R0FKEAHP): This Vishay Dale variant provides 0.5W (1/2W) power rating versus standard 0.125W. Selection is necessary only when thermal dissipation requirements exceed 0.125W specification.

All substitute parts maintain MSL 1 (Unlimited) moisture sensitivity level, ROHS3 compliance, and REACH unaffected status matching the original RC2012J510CS specification.

Frequently Asked Questions (FAQ)

Q: Can RC0805JR-0751RL directly replace RC2012J510CS in production?

A: Yes. RC0805JR-0751RL is a direct equivalent with matching 51 Ohm ±5% tolerance, 0.125W power rating, and 0805 package. Electrical performance is identical. Physical height (0.60mm vs 0.65mm) is within acceptable PCB assembly tolerances.

Q: What is the advantage of upgrading to ±1% tolerance parts?

A: ±1% tolerance parts (AC0805FR-0751RL, RC0805FR-0751RL, CR0805-FX-51R0ELF, RMCF0805FT51R0) provide tighter resistance accuracy. This reduces circuit performance variation and improves overall system tolerance stack-up in precision applications. Electrical performance remains identical for standard applications.

Q: Are AEC-Q200 parts interchangeable with non-automotive parts?

A: AEC-Q200 parts (AC0805FR-0751RL, ERJ-6ENF51R0V, RMCF0805FT51R0, CRCW080551R0FKEA) meet automotive reliability standards and are suitable for automotive applications. Non-automotive parts do not carry this qualification. For non-automotive designs, both automotive and standard parts function identically; automotive parts represent a higher reliability grade.

Q: What is the difference between Cut Tape (CT) and Tape & Reel (TR) packaging?

A: Cut Tape packaging supplies components in individual strips suitable for manual assembly or small-volume production. Tape & Reel packaging provides components on continuous reels for automated assembly equipment. Both packaging types contain identical components; selection depends on assembly process requirements.

Q: Can CRCW080551R0FKEAHP (0.5W) replace RC2012J510CS (0.125W)?

A: CRCW080551R0FKEAHP is physically compatible (0805 package, 51 Ohm ±1%) but provides higher power dissipation capability (0.5W vs 0.125W). This part is suitable only when circuit design requires power handling exceeding 0.125W. For standard 0.125W applications, this part introduces unnecessary cost and size considerations.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance matching RC2012J510CS specification. All parts are REACH unaffected and carry EAR99 ECCN classification.

Q: What is the maximum seated height constraint for PCB assembly?

A: RC2012J510CS specifies 0.65mm maximum seated height. Substitute parts range from 0.50mm to 0.70mm. Parts with 0.70mm height (ERJ-6ENF51R0V) exceed original specification by 0.05mm and require clearance verification. Parts with 0.50mm or 0.60mm height provide improved clearance margin.

Q: Which substitute part offers the best inventory availability?

A: RC0805FR-0751RL (YAGEO) provides highest inventory (1,147,830 pcs), followed by CR0805-FX-51R0ELF (Bourns, 469,289 pcs). These parts support extended production runs without supply constraints.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message