RC2012J392CS Equivalent & Substitute Parts

Part Overview

The RC2012J392CS is a 3.9 kOhms ±5% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is actively produced and widely used in general-purpose circuit applications requiring standard tolerance resistive elements. Equivalent and substitute parts are identified based on matching electrical specifications, package dimensions, and environmental ratings to ensure direct circuit compatibility.

Key Parameters

Parameter	Specification
Resistance Value	3.9 kOhms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitute parts for the RC2012J392CS are classified into two categories based on allowed electrical and mechanical parameters:

Direct Equivalents (Same Tolerance ±5%) Direct equivalents maintain identical electrical specifications: 3.9 kOhms resistance, ±5% tolerance, 0.125W power rating, and 0805 package. These parts are interchangeable without circuit redesign. The RC0805JR-073K9L from YAGEO and AC0805JR-073K9L from YAGEO fall into this category, with AC0805JR-073K9L offering additional automotive AEC-Q200 certification.

Upgrade Substitutes (Tighter Tolerance ±1%) Upgrade substitutes provide improved tolerance specifications (±1% versus ±5%) while maintaining identical resistance value, power rating, and package dimensions. These parts include AC0805FR-073K9L, CR0805-FX-3901ELF, CRG0805F3K9, ERJ-6ENF3901V, KTR10EZPF3901, MCR10ERTF3901, RC0805FR-073K9L, and RMCF0805FT3K90. Upgrade substitutes are suitable for applications requiring tighter tolerance control and are backward compatible with designs specified for ±5% tolerance.

Key parameters determining substitution eligibility:

Resistance value: 3.9 kOhms (exact match required)
Power rating: 0.125W minimum
Package: 0805 (2012 Metric)
Operating temperature range: -55°C to 155°C minimum
Composition: Thick film
Moisture sensitivity: MSL 1 or better

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	MSL	RoHS	Product Status
RC2012J392CS	Samsung Electro-Mechanics	3.9 kΩ	±5%	0.125	0805	±100ppm/°C	-55 to 155°C	1	ROHS3	Active
RC0805JR-073K9L	YAGEO	3.9 kΩ	±5%	0.125	0805	±100ppm/°C	-55 to 155°C	1	ROHS3	Active
AC0805JR-073K9L	YAGEO	3.9 kΩ	±5%	0.125	0805	±100ppm/°C	-55 to 155°C	1	ROHS3	Active
AC0805FR-073K9L	YAGEO	3.9 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	1	ROHS3	Active
CR0805-FX-3901ELF	Bourns Inc.	3.9 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	1	ROHS3	Active
CRG0805F3K9	TE Connectivity Passive Product	3.9 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	1	ROHS3	Active
ERJ-6ENF3901V	Panasonic Electronic Components	3.9 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	1	ROHS3	Active
KTR10EZPF3901	Rohm Semiconductor	3.9 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	1	ROHS3	Active
MCR10ERTF3901	Rohm Semiconductor	3.9 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	1	ROHS3	Discontinued
RC0805FR-073K9L	YAGEO	3.9 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	1	ROHS3	Active
RMCF0805FT3K90	Stackpole Electronics Inc	3.9 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	1	ROHS3	Active

Engineering Selection Recommendations

For Direct Replacement (±5% Tolerance Requirement) RC0805JR-073K9L from YAGEO and AC0805JR-073K9L from YAGEO are direct equivalents to the RC2012J392CS. Both maintain ±5% tolerance specification and are actively produced. AC0805JR-073K9L includes automotive AEC-Q200 certification, making it suitable for automotive applications requiring this qualification.

For Upgraded Performance (±1% Tolerance) When circuit design permits tighter tolerance specifications, upgrade substitutes provide improved accuracy. AC0805FR-073K9L, CR0805-FX-3901ELF, CRG0805F3K9, ERJ-6ENF3901V, KTR10EZPF3901, RC0805FR-073K9L, and RMCF0805FT3K90 are all actively produced ±1% alternatives. RMCF0805FT3K90 and ERJ-6ENF3901V carry automotive AEC-Q200 certification. KTR10EZPF3901 includes high voltage capability in addition to AEC-Q200 rating.

Avoid MCR10ERTF3901 MCR10ERTF3901 is discontinued at DiGi Electronics and should not be selected for new designs despite meeting electrical specifications.

All recommended parts are ROHS3 compliant, MSL 1 rated, and operate across the -55°C to 155°C temperature range.

Frequently Asked Questions (FAQ)

Q: Can I use a ±1% tolerance resistor in place of a ±5% specification? A: Yes. A ±1% tolerance part is a direct upgrade and will function in any circuit designed for ±5% tolerance. The tighter tolerance provides improved accuracy without requiring circuit modifications.

Q: Are all substitute parts in the same 0805 package? A: Yes. All listed equivalents and substitutes use the 0805 (2012 Metric) package with identical footprint dimensions of 2.00mm length × 1.25mm width. Physical board layout compatibility is maintained across all parts.

Q: What is the difference between direct equivalents and upgrade substitutes? A: Direct equivalents (RC0805JR-073K9L, AC0805JR-073K9L) match the original ±5% tolerance specification. Upgrade substitutes provide ±1% tolerance, offering tighter resistance value control. Both categories are electrically and mechanically compatible.

Q: Which substitute parts have automotive certification? A: AC0805JR-073K9L, AC0805FR-073K9L, ERJ-6ENF3901V, KTR10EZPF3901, and RMCF0805FT3K90 carry AEC-Q200 automotive qualification. KTR10EZPF3901 additionally includes high voltage capability.

Q: Are all parts RoHS compliant? A: Yes. All listed parts are ROHS3 compliant and REACH unaffected, meeting environmental regulatory requirements.

Q: What is MSL 1 rating? A: MSL (Moisture Sensitivity Level) 1 indicates unlimited shelf life without moisture baking requirements. All listed parts carry MSL 1 rating, eliminating moisture management concerns during storage and assembly.

Q: Can I substitute based on packaging format (Tape & Reel vs. Cut Tape)? A: Packaging format affects supply and handling but not electrical or mechanical compatibility. Parts are available in both Tape & Reel (TR) and Cut Tape (CT) formats. Selection should be based on procurement and assembly requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message