RC2012J300CS 30 Ohm 0805 SMD Resistor Equivalent & Substitute Parts

Part Overview

The RC2012J300CS is a 30 Ohm ±5% 1/8W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with 696 pieces currently in stock. The part is ROHS3 compliant with MSL 1 (Unlimited) moisture sensitivity rating, suitable for general-purpose applications requiring standard tolerance resistive elements.

Substitute parts are necessary when the original manufacturer part becomes unavailable, when design requirements shift toward higher tolerance specifications, or when automotive-grade certifications are required for enhanced reliability in demanding environments.

Key Parameters

Parameter	Value
Resistance	30 Ohms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution logic for the RC2012J300CS is determined by the following critical parameters:

Primary Substitution Criteria:

Resistance value: 30 Ohms (exact match required)
Package / Case: 0805 (2012 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature Coefficient: ±100ppm/°C (exact match required)
Operating Temperature Range: -55°C to 155°C (exact match required)
Moisture Sensitivity Level: 1 (Unlimited) (exact match required)
RoHS Status: ROHS3 Compliant (exact match required)

Secondary Substitution Criteria (Allowable Variations):

Tolerance: ±5% (original) can be substituted with ±1% (upgrade)
Power Rating: 0.125W (original) can be substituted with 0.5W (upgrade)
Features: Standard moisture resistant can be upgraded to include Automotive AEC-Q200 certification
Manufacturer: Different manufacturers acceptable if all primary criteria match

Substitution Categories:

Direct Substitutes (Identical Specifications): Parts matching all primary and secondary criteria with ±5% tolerance and 0.125W power rating.

Upgrade Substitutes (Enhanced Specifications): Parts with tighter tolerance (±1%) and/or higher power rating (0.5W) while maintaining all primary criteria.

Similar Substitutes (Variant Features): Parts with enhanced certifications (AEC-Q200) or additional features (Anti-Sulfur, Pulse Withstanding) while maintaining core electrical specifications.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp (°C)	Features	Product Status	Inventory
RC2012J300CS	Samsung Electro-Mechanics	30Ω	±5%	0.125	0805	±100ppm/°C	-55 to 155	Moisture Resistant	Active	696
RC0805JR-0730RL	YAGEO	30Ω	±5%	0.125	0805	±100ppm/°C	-55 to 155	Moisture Resistant	Active	51166
AC0805FR-0730RL	YAGEO	30Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155	Automotive AEC-Q200, Moisture Resistant	Active	3037
ERJ-6ENF30R0V	Panasonic Electronic Components	30Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155	Automotive AEC-Q200	Active	41907
MCR10ERTF30R0	Rohm Semiconductor	30Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155	None	Discontinued at DiGi Electronics	1588
RC0805FR-0730RL	YAGEO	30Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155	Moisture Resistant	Active	681729
RMCF0805FT30R0	Stackpole Electronics Inc	30Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155	Automotive AEC-Q200	Active	24124
CRCW080530R0FKEA	Vishay Dale	30Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155	Automotive AEC-Q200	Active	32252
CRCW080530R0FKEAC	Vishay Dale	30Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155	None	Active	9542
CRCW080530R0FKEAHP	Vishay Dale	30Ω	±1%	0.5	0805	±100ppm/°C	-55 to 155	Automotive AEC-Q200, Pulse Withstanding	Active	10974
ERJ-UP6F30R0V	Panasonic Electronic Components	30Ω	±1%	0.5	0805	±100ppm/°C	-55 to 155	Anti-Sulfur, Automotive AEC-Q200, Pulse Withstanding	Active	5713

Engineering Selection Recommendations

Direct Substitution (Identical Specifications):

RC0805JR-0730RL from YAGEO is the primary direct substitute for RC2012J300CS. Both parts share identical electrical specifications (30Ω ±5%, 0.125W, ±100ppm/°C) and package configuration (0805). RC0805JR-0730RL maintains Active product status with significantly higher inventory availability (51,166 pieces). Both parts are ROHS3 compliant with MSL 1 rating. This substitution requires no design modifications.

Upgrade Substitution (Enhanced Tolerance):

RC0805FR-0730RL from YAGEO provides tolerance upgrade from ±5% to ±1% while maintaining all other specifications. This part is YAGEO's RC_L series with Active status and exceptional inventory depth (681,729 pieces). The tighter tolerance specification allows use in applications requiring improved accuracy without circuit redesign. Height-seated maximum is 0.024" (0.60mm) compared to original 0.026" (0.65mm), representing a minor dimensional improvement.

Upgrade Substitution (Automotive Grade):

AC0805FR-0730RL from YAGEO, ERJ-6ENF30R0V from Panasonic Electronic Components, RMCF0805FT30R0 from Stackpole Electronics Inc, and CRCW080530R0FKEA from Vishay Dale all provide ±1% tolerance with Automotive AEC-Q200 certification. These parts are suitable for applications requiring automotive-grade reliability. All maintain Active product status and ROHS3 compliance. Selection among these four depends on packaging preference (Tape & Reel vs. Cut Tape) and manufacturer supply chain considerations.

Upgrade Substitution (Higher Power Rating):

CRCW080530R0FKEAHP from Vishay Dale and ERJ-UP6F30R0V from Panasonic Electronic Components provide 0.5W (1/2W) power rating upgrade while maintaining 30Ω resistance and ±1% tolerance. These parts are suitable for applications requiring higher power dissipation capability. Both include Automotive AEC-Q200 certification. ERJ-UP6F30R0V adds Anti-Sulfur and Pulse Withstanding features. These upgrades require verification that circuit board layout can accommodate the enhanced thermal characteristics.

Discontinued Part:

MCR10ERTF30R0 from Rohm Semiconductor is marked as Discontinued at DiGi Electronics. While 1,588 pieces remain in inventory, this part should not be selected for new designs due to long-term supply uncertainty.

Frequently Asked Questions (FAQ)

Q: Can RC0805JR-0730RL directly replace RC2012J300CS without circuit modification?

A: Yes. RC0805JR-0730RL is a direct substitute with identical electrical specifications (30Ω ±5%, 0.125W, ±100ppm/°C) and package configuration (0805). Both parts are ROHS3 compliant with MSL 1 rating. No design changes are required.

Q: What is the difference between ±5% and ±1% tolerance specifications?

A: Tolerance defines the allowable deviation from the nominal resistance value. RC2012J300CS with ±5% tolerance allows resistance values between 28.5Ω and 31.5Ω. Substitute parts with ±1% tolerance (such as RC0805FR-0730RL) allow values between 29.7Ω and 30.3Ω. Tighter tolerance provides improved circuit accuracy but does not affect physical compatibility or thermal performance.

Q: Are automotive-grade parts (AEC-Q200) compatible with non-automotive applications?

A: Yes. Automotive-grade parts meet or exceed general-purpose specifications. Parts with AEC-Q200 certification (AC0805FR-0730RL, ERJ-6ENF30R0V, RMCF0805FT30R0, CRCW080530R0FKEA) can be used in any application where the original part is specified. AEC-Q200 certification indicates enhanced reliability testing and qualification, providing additional assurance for critical applications.

Q: What is the significance of the 0805 package designation?

A: 0805 is the industry-standard SMD (Surface Mount Device) package size, equivalent to 2012 Metric dimensions (2.00mm length × 1.25mm width). All substitute parts listed maintain this identical package configuration, ensuring mechanical compatibility with existing PCB layouts and pick-and-place equipment programming.

Q: Can I use CRCW080530R0FKEAHP (0.5W) in place of RC2012J300CS (0.125W)?

A: Yes, from an electrical and mechanical compatibility standpoint. CRCW080530R0FKEAHP maintains identical resistance (30Ω), tolerance (±1%), package (0805), and operating temperature range. The higher power rating (0.5W vs. 0.125W) represents a capability upgrade. However, verify that the application circuit design does not depend on the specific thermal characteristics of the 0.125W part. Height-seated maximum is 0.020" (0.50mm) compared to original 0.026" (0.65mm).

Q: What does MSL 1 (Unlimited) moisture sensitivity level mean?

A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture-control handling during storage, transportation, or assembly. All substitute parts listed maintain MSL 1 rating, ensuring identical moisture-handling requirements.

Q: Why do some substitute parts have higher inventory levels?

A: Inventory levels reflect current distributor stock and manufacturing production volumes. RC0805FR-0730RL (681,729 pieces) and RC0805JR-0730RL (51,166 pieces) have significantly higher availability due to YAGEO's market position and production capacity. Higher inventory availability typically indicates better long-term supply security for production planning.

Q: What is the Temperature Coefficient specification, and why is it consistent across all parts?

A: Temperature Coefficient (±100ppm/°C) specifies how the resistance value changes with temperature. A coefficient of ±100ppm/°C means the resistance can change by up to 0.01% per degree Celsius. All substitute parts maintain this identical specification, ensuring consistent thermal performance across the operating temperature range (-55°C to 155°C).

Q: Are there any packaging format differences between substitute parts?

A: Yes. Most parts are supplied in Tape & Reel (TR) format for automated assembly. RC0805FR-0730RL and CRCW080530R0FKEAHP are available in Cut Tape (CT) & Digi-Reel® format. Packaging format affects handling and assembly processes but does not impact electrical or mechanical performance. Verify your assembly equipment compatibility with the selected packaging format.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message