RC2012J154CS 150kΩ 0805 Chip Resistor Equivalent & Substitute Parts

Part Overview

The RC2012J154CS is a 150 kΩ ±5% thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is rated for 0.125W (1/8W) power dissipation with moisture-resistant construction and operates across -55°C to 155°C. The part maintains Active product status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and package compatibility to ensure direct circuit board integration without design modification.

Key Parameters

Parameter	Value	Specification Basis
Resistance	150 kΩ	Exact match required
Tolerance	±5%	Minimum acceptable tolerance
Power Rating	0.125W (1/8W)	Exact match required
Package / Case	0805 (2012 Metric)	Exact match required
Composition	Thick Film	Exact match required
Operating Temperature	-55°C to 155°C	Minimum acceptable range
Temperature Coefficient	±100ppm/°C	Exact match required
RoHS Status	ROHS3 Compliant	Regulatory requirement
Moisture Sensitivity Level	MSL 1 (Unlimited)	Exact match required

Substitute Part Grouping Explanation

Substitute parts for the RC2012J154CS are classified into three categories based on electrical and mechanical compatibility:

Direct Equivalent (Same Tolerance ±5%): Parts maintaining identical ±5% tolerance specification with matching 150 kΩ resistance, 0.125W power rating, 0805 package, and thick film composition. These components provide pin-for-pin compatibility without circuit performance alteration.

Upgrade Parts (Tighter Tolerance ±1%): Parts with improved ±1% tolerance specification while maintaining all other critical parameters: 150 kΩ resistance, 0.125W power rating, 0805 package, thick film composition, -55°C to 155°C operating range, and ±100ppm/°C temperature coefficient. These parts are electrically and mechanically interchangeable with enhanced precision characteristics.

Similar Parts (Tolerance ±5% with Enhanced Features): Parts matching the original ±5% tolerance and all core electrical specifications but incorporating additional certifications such as Automotive AEC-Q200 qualification. These maintain full compatibility while offering supplementary qualification benefits.

Substitution eligibility is determined by: (1) exact resistance value of 150 kΩ, (2) tolerance equal to or better than ±5%, (3) identical 0.125W power rating, (4) 0805 package format, (5) thick film composition, (6) operating temperature range of -55°C to 155°C minimum, (7) ±100ppm/°C temperature coefficient, (8) ROHS3 compliance, and (9) MSL 1 rating.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Composition	Temp Coeff	Op Temp Range	Height Max (mm)	RoHS	MSL	Substitution Type
RC2012J154CS	Samsung Electro-Mechanics	150 kΩ	±5%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155°C	0.65	ROHS3	1	Main Part
RC0805JR-07150KL	YAGEO	150 kΩ	±5%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155°C	0.60	ROHS3	1	Direct Equivalent
AC0805JR-07150KL	YAGEO	150 kΩ	±5%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155°C	0.60	ROHS3	1	Similar Part
AC0805FR-07150KL	YAGEO	150 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155°C	0.60	ROHS3	1	Upgrade Part
CR0805-FX-1503ELF	Bourns Inc.	150 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155°C	0.60	ROHS3	1	Upgrade Part
CRG0805F150K	TE Connectivity Passive Product	150 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155°C	0.65	ROHS3	1	Upgrade Part
ERJ-6ENF1503V	Panasonic Electronic Components	150 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155°C	0.70	ROHS3	1	Upgrade Part
KTR10EZPF1503	Rohm Semiconductor	150 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155°C	0.65	ROHS3	1	Upgrade Part
RC0805FR-07150KL	YAGEO	150 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155°C	0.60	ROHS3	1	Upgrade Part
RMCF0805FG150K	Stackpole Electronics Inc	150 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155°C	0.65	ROHS3	1	Upgrade Part
CRCW0805150KFKEA	Vishay Dale	150 kΩ	±1%	0.125	0805	Thick Film	±100ppm/°C	-55 to 155°C	0.50	ROHS3	1	Upgrade Part

Engineering Selection Recommendations

Direct Equivalent Selection: The RC0805JR-07150KL from YAGEO provides direct functional equivalence to the RC2012J154CS. Both components maintain ±5% tolerance, identical electrical specifications, and ROHS3 compliance. This part is suitable for applications where the original tolerance specification is the design requirement.

Upgrade Part Selection: All upgrade parts (AC0805FR-07150KL, CR0805-FX-1503ELF, CRG0805F150K, ERJ-6ENF1503V, KTR10EZPF1503, RC0805FR-07150KL, RMCF0805FG150K, CRCW0805150KFKEA) feature ±1% tolerance, providing improved precision over the original ±5% specification. These components are electrically and mechanically interchangeable with the RC2012J154CS and maintain all required certifications. Selection among upgrade parts depends on packaging format preference (Tape & Reel versus Cut Tape) and availability requirements.

Automotive-Qualified Parts: AC0805FR-07150KL, ERJ-6ENF1503V, KTR10EZPF1503, RMCF0805FG150K, and CRCW0805150KFKEA carry Automotive AEC-Q200 qualification. These parts are suitable for applications requiring automotive-grade component certification while maintaining full compatibility with the original design.

Similar Part Selection: AC0805JR-07150KL from YAGEO maintains the original ±5% tolerance with added Automotive AEC-Q200 qualification and moisture-resistant features. This part is appropriate for designs requiring automotive qualification without tolerance enhancement.

All substitute parts maintain ROHS3 compliance, MSL 1 rating, and -55°C to 155°C operating temperature range, ensuring regulatory and environmental compatibility with the original specification.

Frequently Asked Questions (FAQ)

Q: Can I use a ±1% tolerance part as a substitute for the ±5% RC2012J154CS?

A: Yes. The ±1% tolerance parts listed as upgrade options are electrically and mechanically interchangeable with the RC2012J154CS. A tighter tolerance specification is compatible with designs requiring the original ±5% tolerance, as ±1% represents improved precision within the acceptable range.

Q: What is the difference between Direct Equivalent and Upgrade parts?

A: Direct Equivalent parts (RC0805JR-07150KL) maintain the original ±5% tolerance specification. Upgrade parts feature ±1% tolerance, providing enhanced precision. Both categories are fully compatible with the RC2012J154CS in terms of resistance value, power rating, package format, and operating temperature range.

Q: Are all substitute parts available in the same packaging format?

A: No. The RC2012J154CS is supplied in Tape & Reel (TR) packaging. Substitute parts are available in both Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® formats. Verify packaging compatibility with your assembly process requirements before selection.

Q: Do I need to verify Automotive AEC-Q200 qualification for non-automotive applications?

A: No. Automotive AEC-Q200 qualification is an additional certification that does not affect compatibility in non-automotive applications. Parts with this certification are suitable for general-purpose use and provide supplementary qualification benefits without design impact.

Q: What is the significance of the height difference among substitute parts?

A: All substitute parts maintain 0805 package format with height variations between 0.50mm and 0.70mm (maximum seated height). These variations are within standard 0805 package tolerances and do not affect circuit board assembly compatibility. Verify height specifications only if your design includes height-constrained applications.

Q: Can I mix different substitute parts in the same circuit board assembly?

A: Yes. All listed substitute parts are electrically and mechanically interchangeable with the RC2012J154CS and with each other. Mixed usage is permissible provided all parts meet the circuit design tolerance and performance requirements.

Q: What does MSL 1 (Unlimited) mean for component handling?

A: MSL 1 rating indicates unlimited shelf life without moisture bake-out requirements. Both the RC2012J154CS and all substitute parts carry MSL 1 classification, eliminating moisture sensitivity concerns during storage and handling.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed maintain ROHS3 compliance, matching the regulatory status of the RC2012J154CS. This ensures compatibility with environmental and regulatory requirements across all applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message