RC2012J151CS 150 Ohm 0805 Chip Resistor Equivalent & Substitute Parts

Part Overview

The RC2012J151CS is a 150 Ohm thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component operates at 0.125W (1/8W) power rating with ±5% tolerance and moisture-resistant construction. The part is ROHS3 compliant and carries MSL Level 1 rating, indicating unlimited shelf life under standard storage conditions. As an active product with established supply availability, equivalent and substitute parts are available from multiple manufacturers for design flexibility, inventory optimization, and supply chain continuity.

Key Parameters

Parameter	Value
Resistance	150 Ohms
Tolerance	±5%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

Substitution of the RC2012J151CS is determined by strict equivalence across the following critical parameters:

Primary Substitution Criteria:

Resistance value: 150 Ohms (exact match required)
Package format: 0805 (2012 Metric) (physical and electrical compatibility)
Power rating: 0.125W minimum (1/8W)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C to 155°C minimum
Termination count: 2 (standard SMD configuration)

Tolerance Classification: Substitute parts are categorized into two groups based on tolerance specification:

Direct Equivalents (±5% Tolerance): Parts with matching ±5% tolerance provide pin-for-pin replacement without circuit redesign or re-qualification.
Upgrade Substitutes (±1% Tolerance): Parts with tighter ±1% tolerance offer improved accuracy and stability. These are electrically compatible upgrades suitable for applications requiring higher precision. Tolerance upgrade does not affect mechanical fit or thermal characteristics.

Compliance Considerations: All listed substitutes maintain ROHS3 compliance, MSL Level 1 rating, and EAR99 export classification. Automotive-rated variants (AEC-Q200) are identified separately and provide enhanced reliability for automotive applications while maintaining full compatibility with standard industrial designs.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	Height Max (mm)	Features	RoHS	MSL
RC2012J151CS	Samsung Electro-Mechanics	150Ω	±5%	0.125	0805	±100ppm/°C	-55 to 155°C	0.65	Moisture Resistant	ROHS3	1
RC0805JR-07150RL	YAGEO	150Ω	±5%	0.125	0805	±100ppm/°C	-55 to 155°C	0.60	Moisture Resistant	ROHS3	1
RMCF0805FT150R	Stackpole Electronics Inc	150Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.65	Automotive AEC-Q200	ROHS3	1
AC0805FR-07150RL	YAGEO	150Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.60	Automotive AEC-Q200, Moisture Resistant	ROHS3	1
CR0805-FX-1500ELF	Bourns Inc.	150Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.60	Moisture Resistant	ROHS3	1
CRG0805F150R	TE Connectivity Passive Product	150Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.65	Standard	ROHS3	1
ERJ-6ENF1500V	Panasonic Electronic Components	150Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.70	Automotive AEC-Q200	ROHS3	1
KTR10EZPF1500	Rohm Semiconductor	150Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.65	Automotive AEC-Q200, High Voltage	ROHS3	1
RC0805FR-07150RL	YAGEO	150Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.60	Moisture Resistant	ROHS3	1
RMCF0805FG150R	Stackpole Electronics Inc	150Ω	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.65	Automotive AEC-Q200	ROHS3	1
AC0805JR-07150RL	YAGEO	150Ω	±5%	0.125	0805	±100ppm/°C	-55 to 155°C	0.60	Automotive AEC-Q200, Moisture Resistant	ROHS3	1

Engineering Selection Recommendations

Direct Equivalent Selection (±5% Tolerance):

RC0805JR-07150RL (YAGEO) serves as the primary direct equivalent to RC2012J151CS. Both components share identical electrical specifications (150Ω ±5%, 0.125W, ±100ppm/°C) and package format (0805). The YAGEO part features moisture-resistant construction matching the original specification and maintains ROHS3 compliance with MSL Level 1 rating. Physical height difference (0.60mm vs 0.65mm) remains within standard PCB assembly tolerances and does not affect circuit performance or board layout.

AC0805JR-07150RL (YAGEO) provides an alternative direct equivalent with identical tolerance and power rating. This variant includes automotive AEC-Q200 qualification, offering enhanced reliability for applications requiring automotive-grade components while maintaining full compatibility with standard industrial designs.

Upgrade Substitute Selection (±1% Tolerance):

Tolerance upgrade from ±5% to ±1% is electrically compatible and does not require circuit redesign. Selection among ±1% variants depends on application-specific requirements:

Standard Industrial Applications: CR0805-FX-1500ELF (Bourns) or RC0805FR-07150RL (YAGEO) provide ±1% tolerance with moisture-resistant features and compact 0.60mm height profile.
Automotive Applications: RMCF0805FT150R (Stackpole), AC0805FR-07150RL (YAGEO), ERJ-6ENF1500V (Panasonic), RMCF0805FG150R (Stackpole), or KTR10EZPF1500 (Rohm) all carry AEC-Q200 automotive qualification. These parts are suitable for automotive circuit designs and high-reliability applications.
High-Voltage Applications: KTR10EZPF1500 (Rohm) combines ±1% tolerance with high-voltage capability and AEC-Q200 rating, appropriate for circuits requiring enhanced voltage stress performance.

All substitute parts maintain ROHS3 compliance, MSL Level 1 rating, and identical operating temperature range (-55°C to 155°C). Selection should be based on application requirements, packaging preference (Tape & Reel vs Cut Tape), and automotive qualification necessity.

Frequently Asked Questions (FAQ)

Q: Can RC0805JR-07150RL replace RC2012J151CS directly without circuit modification?

A: Yes. RC0805JR-07150RL is a direct equivalent with matching 150Ω ±5% tolerance, 0.125W power rating, and 0805 package format. Both components operate across -55°C to 155°C and maintain identical thermal and electrical characteristics. No circuit redesign is required.

Q: What is the difference between direct equivalents and upgrade substitutes?

A: Direct equivalents (RC0805JR-07150RL, AC0805JR-07150RL) maintain ±5% tolerance matching the original RC2012J151CS specification. Upgrade substitutes feature tighter ±1% tolerance, providing improved accuracy and stability. Tolerance upgrade is electrically compatible and does not affect mechanical fit or thermal performance. Circuit redesign is not required for tolerance upgrades.

Q: Are automotive-rated parts (AEC-Q200) compatible with standard industrial designs?

A: Yes. Automotive-rated variants (RMCF0805FT150R, AC0805FR-07150RL, ERJ-6ENF1500V, RMCF0805FG150R, KTR10EZPF1500) maintain identical electrical specifications and package format. AEC-Q200 qualification indicates enhanced reliability and stricter manufacturing controls. These parts are fully compatible with standard industrial applications and provide superior performance margin.

Q: Does the height difference between substitute parts affect PCB assembly?

A: Height variations (0.60mm to 0.70mm maximum seated height) remain within standard SMD assembly tolerances and do not affect reflow soldering, pick-and-place equipment compatibility, or circuit performance. PCB layout and assembly processes require no modification.

Q: Which substitute part offers the best combination of tolerance, reliability, and availability?

A: CR0805-FX-1500ELF (Bourns) combines ±1% tolerance, moisture-resistant construction, compact 0.60mm height, and high inventory availability (91,440 pcs). For automotive applications, AC0805FR-07150RL (YAGEO) provides ±1% tolerance, AEC-Q200 qualification, moisture resistance, and strong availability (4,213 pcs).

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL Level 1 rating, matching the environmental and regulatory status of RC2012J151CS. No compliance verification is required for substitution.

Q: Can I use a ±1% tolerance part in a circuit designed for ±5% tolerance?

A: Yes. Tolerance upgrade from ±5% to ±1% is a direct substitution that improves circuit accuracy without requiring design modification. The tighter tolerance provides better component matching and circuit stability.

Q: What packaging formats are available for substitute parts?

A: Substitute parts are available in Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® formats. Selection depends on production volume and assembly equipment compatibility. Both formats maintain identical component specifications and performance characteristics.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message