Equivalent & Substitute Parts for RC2012J110CS

Part Overview

The RC2012J110CS is an 11 Ohm ±5% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is actively produced and widely used in general-purpose electronic applications requiring moisture-resistant resistive elements. Substitute parts are necessary when Samsung Electro-Mechanics inventory is unavailable, when design specifications require enhanced tolerance or automotive qualification, or when alternative packaging formats are preferred for supply chain optimization.

Key Parameters

Parameter	Value	Significance for Substitution
Resistance Value	11 Ohms	Must match exactly
Tolerance	±5%	Minimum acceptable; ±1% parts are upgrades
Power Rating	0.125W (1/8W)	Must match or exceed
Package / Case	0805 (2012 Metric)	Must match for PCB compatibility
Composition	Thick Film	Determines electrical characteristics
Temperature Coefficient	±100ppm/°C	Standard for this category
Operating Temperature Range	-55°C ~ 155°C	Must meet or exceed application requirements
Moisture Sensitivity Level	MSL 1 (Unlimited)	Indicates no moisture sensitivity restrictions
RoHS Status	ROHS3 Compliant	Required for regulated applications

Substitute Part Grouping Explanation

Substitution logic is based on three categories determined by tolerance and automotive qualification:

Direct Equivalent (Same Tolerance ±5%): RC0805JR-0711RL (YAGEO) maintains identical electrical specifications and tolerance to the main part. This substitution is valid for applications where ±5% tolerance is acceptable and automotive qualification is not required.

Upgrade Substitutes (Enhanced Tolerance ±1%): AC0805FR-0711RL, ERJ-6ENF11R0V, KTR10EZPF11R0, MCR10ERTF11R0, RC0805FR-0711RL, RMCF0805FT11R0, and CRCW080511R0FKEA all provide ±1% tolerance, representing improved accuracy over the original ±5% specification. These parts are electrically compatible and can replace the RC2012J110CS in any application. Upgrade substitutes with AEC-Q200 automotive qualification (AC0805FR-0711RL, ERJ-6ENF11R0V, KTR10EZPF11R0, RMCF0805FT11R0, CRCW080511R0FKEA) are suitable for automotive and high-reliability applications.

All substitute parts share the following critical parameters with the main part:

Resistance: 11 Ohms
Power Rating: 0.125W (1/8W)
Package: 0805 (2012 Metric)
Composition: Thick Film
Temperature Coefficient: ±100ppm/°C
Operating Temperature: -55°C ~ 155°C
Moisture Sensitivity Level: MSL 1 (Unlimited)
RoHS Status: ROHS3 Compliant

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Height Max (mm)	Temp Coeff	Operating Temp	AEC-Q200	Product Status
RC2012J110CS	Samsung Electro-Mechanics	11Ω	±5%	0.125	0805	0.65	±100ppm/°C	-55~155°C	No	Active
RC0805JR-0711RL	YAGEO	11Ω	±5%	0.125	0805	0.60	±100ppm/°C	-55~155°C	No	Active
AC0805FR-0711RL	YAGEO	11Ω	±1%	0.125	0805	0.60	±100ppm/°C	-55~155°C	Yes	Active
ERJ-6ENF11R0V	Panasonic Electronic Components	11Ω	±1%	0.125	0805	0.70	±100ppm/°C	-55~155°C	Yes	Active
KTR10EZPF11R0	Rohm Semiconductor	11Ω	±1%	0.125	0805	0.65	±100ppm/°C	-55~155°C	Yes	Active
MCR10ERTF11R0	Rohm Semiconductor	11Ω	±1%	0.125	0805	0.65	±100ppm/°C	-55~155°C	No	Discontinued at DiGi Electronics
RC0805FR-0711RL	YAGEO	11Ω	±1%	0.125	0805	0.60	±100ppm/°C	-55~155°C	No	Active
RMCF0805FT11R0	Stackpole Electronics Inc	11Ω	±1%	0.125	0805	0.65	±100ppm/°C	-55~155°C	Yes	Active
CRCW080511R0FKEA	Vishay Dale	11Ω	±1%	0.125	0805	0.50	±100ppm/°C	-55~155°C	Yes	Active

Engineering Selection Recommendations

For Direct Replacement (Equivalent Tolerance): RC0805JR-0711RL is the primary direct equivalent when ±5% tolerance is specified and automotive qualification is not required. This part maintains identical electrical performance and is actively produced by YAGEO with substantial inventory availability.

For Tolerance Upgrade (±1% Applications): When circuit design permits or requires improved tolerance, RC0805FR-0711RL (YAGEO) is recommended as the first choice due to high inventory availability (366,095 pcs) and active product status. This part provides moisture resistance matching the original specification while delivering ±1% tolerance.

For Automotive and High-Reliability Applications: AC0805FR-0711RL, ERJ-6ENF11R0V, KTR10EZPF11R0, RMCF0805FT11R0, and CRCW080511R0FKEA all carry AEC-Q200 automotive qualification. Selection among these should prioritize:

CRCW080511R0FKEA (Vishay Dale) for lowest profile applications (0.50mm height)
ERJ-6ENF11R0V (Panasonic) for highest inventory availability (86,742 pcs)
RMCF0805FT11R0 (Stackpole) for automotive-grade general-purpose use

Avoid: MCR10ERTF11R0 is discontinued at DiGi Electronics and should not be selected for new designs despite technical compatibility.

Frequently Asked Questions (FAQ)

Q: Can RC0805JR-0711RL replace RC2012J110CS directly? A: Yes. RC0805JR-0711RL is a direct equivalent with identical 11 Ohm resistance, ±5% tolerance, 0.125W power rating, and 0805 package. Both parts are thick film, moisture resistant, and operate across -55°C to 155°C. The only difference is manufacturer (YAGEO vs. Samsung Electro-Mechanics).

Q: What is the difference between ±5% and ±1% tolerance parts? A: Tolerance defines the maximum deviation from the nominal 11 Ohm value. ±5% tolerance allows deviation up to ±0.55 Ohms; ±1% tolerance restricts deviation to ±0.11 Ohms. Applications requiring tighter resistance control should use ±1% parts. All ±1% substitutes are electrically compatible with the original ±5% part.

Q: Are AEC-Q200 parts suitable for non-automotive applications? A: Yes. AEC-Q200 qualification indicates enhanced reliability testing and stricter manufacturing controls. These parts exceed standard requirements and are fully compatible with general-purpose applications. Using AEC-Q200 parts in non-automotive circuits provides additional margin for reliability.

Q: Does package height matter for PCB assembly? A: Yes, if PCB layout includes height-constrained areas. All substitute parts use 0805 (2012 Metric) package with heights ranging from 0.50mm to 0.70mm. CRCW080511R0FKEA offers the lowest profile (0.50mm); ERJ-6ENF11R0V has the highest (0.70mm). Standard PCB designs accommodate this entire range without modification.

Q: Can I use these parts interchangeably in production? A: Yes, provided the circuit design accepts the tolerance level. Direct equivalent RC0805JR-0711RL maintains ±5% tolerance matching the original. All ±1% upgrade parts are backward compatible. Ensure supply chain documentation reflects any manufacturer change for traceability and compliance purposes.

Q: What does MSL 1 (Unlimited) mean? A: Moisture Sensitivity Level 1 indicates the component has no moisture sensitivity restrictions. These parts do not require special dry-pack storage or baking procedures before soldering. All listed parts share MSL 1 classification.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All parts listed, including the main part RC2012J110CS, are ROHS3 compliant. This compliance is maintained across all manufacturers and substitutes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message