RC2012F914CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F914CS is a 910 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with moisture-resistant construction and operates across the temperature range of -55°C to 155°C. The part is ROHS3 compliant and carries MSL Level 1 (Unlimited) moisture sensitivity rating. Equivalent and substitute parts are identified to support procurement flexibility, supply chain continuity, and application-specific requirements such as automotive qualification or enhanced performance characteristics.

Substiute Parts

RC2012F914CS

Samsung Electro-MechanicsIn Stock: 853RC2012F914CS Datasheet

Current PartRFQ

CR0805-FX-9103ELF

Bourns Inc.In Stock: 20633CR0805-FX-9103ELF Datasheet

DirectRFQ

ERJ-6ENF9103V

Panasonic Electronic ComponentsIn Stock: 99667ERJ-6ENF9103V Datasheet

DirectRFQ

KTR10EZPF9103

Rohm SemiconductorIn Stock: 11152KTR10EZPF9103 Datasheet

DirectRFQ

RC0805FR-07910KL

YAGEOIn Stock: 115515RC0805FR-07910KL Datasheet

DirectRFQ

RMCF0805FT910K

Stackpole Electronics IncIn Stock: 18713RMCF0805FT910K Datasheet

DirectRFQ

CRCW0805910KFKEA

Vishay DaleIn Stock: 24726CRCW0805910KFKEA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RC2012F914CS is determined by strict equivalence across the following critical parameters: resistance value (910 kOhms), tolerance (±1%), power rating (0.125W), package type (0805 / 2012 Metric), composition (thick film), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C ~ 155°C). All identified substitute parts maintain these core electrical and mechanical specifications. Substitute parts are grouped into two categories:

Direct Substitutes maintain identical electrical performance and standard moisture-resistant or automotive-qualified construction: CR0805-FX-9103ELF (Bourns Inc.), RC0805FR-07910KL (YAGEO), ERJ-6ENF9103V (Panasonic Electronic Components), KTR10EZPF9103 (Rohm Semiconductor), and RMCF0805FT910K (Stackpole Electronics Inc.).

Similar Substitute meets all core electrical parameters with automotive AEC-Q200 qualification: CRCW0805910KFKEA (Vishay Dale).

All substitute parts are Active product status, ROHS3 compliant, and carry MSL Level 1 rating. Physical dimensions remain within acceptable tolerance across all options.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain full electrical and mechanical compatibility with the RC2012F914CS across core specifications: 910 kOhms resistance, ±1% tolerance, 0.125W power rating, 0805 package, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range. All parts are Active product status and ROHS3 compliant with MSL Level 1 rating.

For standard industrial applications requiring moisture-resistant construction without automotive qualification: CR0805-FX-9103ELF (Bourns Inc.) and RC0805FR-07910KL (YAGEO) are direct functional equivalents to the RC2012F914CS.

For automotive applications requiring AEC-Q200 qualification: ERJ-6ENF9103V (Panasonic Electronic Components), KTR10EZPF9103 (Rohm Semiconductor), RMCF0805FT910K (Stackpole Electronics Inc.), and CRCW0805910KFKEA (Vishay Dale) are qualified alternatives. KTR10EZPF9103 includes high voltage capability as an additional feature.

For space-constrained designs where minimum height is critical: CRCW0805910KFKEA (Vishay Dale) offers the lowest seated height at 0.50mm maximum.

Selection should be based on application requirements, supply availability, and any specific certifications mandated by the end-use environment.

Frequently Asked Questions (FAQ)

Q: Can I substitute RC2012F914CS with any of these parts without circuit redesign?

A: Yes. All substitute parts maintain identical electrical specifications (910 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C to 155°C). The 0805 package is standardized across all options. Physical height variations (0.50mm to 0.70mm maximum seated height) are within typical PCB design tolerances and do not require circuit modification.

Q: What is the difference between moisture-resistant and automotive AEC-Q200 versions?

A: Moisture-resistant versions (CR0805-FX-9103ELF, RC0805FR-07910KL) are designed for general industrial applications with MSL Level 1 protection. Automotive AEC-Q200 versions (ERJ-6ENF9103V, KTR10EZPF9103, RMCF0805FT910K, CRCW0805910KFKEA) meet automotive industry qualification standards and are suitable for automotive and high-reliability applications. Both types are ROHS3 compliant and carry identical operating temperature ranges.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All identified substitute parts are supplied in Tape & Reel (TR) packaging, matching the original RC2012F914CS packaging format for automated assembly compatibility.

Q: Does the height difference between substitute parts affect PCB layout?

A: Height variations range from 0.50mm (CRCW0805910KFKEA) to 0.70mm (ERJ-6ENF9103V) maximum seated height. These differences are negligible for standard PCB designs and do not typically require layout modifications. Verify clearance requirements for applications with height-critical constraints.

Q: Which substitute part has the best inventory availability?

A: RC0805FR-07910KL (YAGEO) has the highest inventory at 115,441 pieces. ERJ-6ENF9103V (Panasonic Electronic Components) has 99,639 pieces available. Both options provide strong supply continuity.

Q: Can KTR10EZPF9103 be used in non-high-voltage applications?

A: Yes. KTR10EZPF9103 is a direct electrical equivalent with high voltage capability as an additional feature. It can be used in any application where the RC2012F914CS is specified. The high voltage rating does not restrict its use in standard applications.