RC2012F912CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F912CS is a 9.1 kOhm ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status with moisture-resistant characteristics and ROHS3 compliance. The part is supplied in Tape & Reel packaging with 620 pieces currently in stock.

Equivalent and substitute parts are identified when applications require alternative sourcing due to inventory constraints, supply chain disruptions, or specific design requirements that permit component interchange based on electrical and mechanical parameter compatibility.

Key Parameters

Parameter	Value
Resistance	9.1 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution eligibility for the RC2012F912CS is determined by strict parameter matching across the following critical criteria:

Mandatory Matching Parameters:

Resistance value: 9.1 kOhms
Tolerance: ±1%
Package / Case: 0805 (2012 Metric)
Composition: Thick Film
Temperature Coefficient: ±100ppm/°C
Operating Temperature Range: -55°C ~ 155°C
Moisture Sensitivity Level: 1 (Unlimited)
RoHS Status: ROHS3 Compliant
Number of Terminations: 2

Power Rating Consideration: Substitute parts are grouped into two categories based on power rating:

Direct Substitutes (1/8W - 0.125W): Parts with identical 0.125W power rating provide direct functional equivalence
Similar Parts (Higher Power Ratings): Parts with 0.4W or 0.5W ratings offer enhanced power dissipation capability and are suitable for applications where the original 0.125W specification is not a limiting constraint

Packaging Format: Both Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® packaging formats are acceptable for substitution, as packaging format does not affect electrical performance or mechanical fit in PCB assembly.

Automotive Certification: Parts bearing AEC-Q200 certification meet automotive-grade reliability standards and are suitable for general industrial and commercial applications. Parts without AEC-Q200 designation are suitable for non-automotive applications.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	Height Max (mm)	Features	Product Status
RC2012F912CS	Samsung Electro-Mechanics	9.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.65	Moisture Resistant	Active
CR0805-FX-9101ELF	Bourns Inc.	9.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.60	Moisture Resistant	Active
ERJ-6ENF9101V	Panasonic Electronic Components	9.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.70	Automotive AEC-Q200	Active
KTR10EZPF9101	Rohm Semiconductor	9.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.65	Automotive AEC-Q200, High Voltage	Active
RC0805FR-079K1L	YAGEO	9.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.60	Moisture Resistant	Active
RMCF0805FT9K10	Stackpole Electronics Inc	9.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.65	Automotive AEC-Q200	Active
AC0805FR-079K1L	YAGEO	9.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.60	Automotive AEC-Q200, Moisture Resistant	Active
CRCW08059K10FKEA	Vishay Dale	9.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.50	Automotive AEC-Q200	Active
CRCW08059K10FKEAHP	Vishay Dale	9.1 kΩ	±1%	0.5	0805	±100ppm/°C	-55~155°C	0.50	Automotive AEC-Q200, Pulse Withstanding	Active
ESR10EZPF9101	Rohm Semiconductor	9.1 kΩ	±1%	0.4	0805	±100ppm/°C	-55~155°C	0.65	Automotive AEC-Q200, Pulse Withstanding	Active
MCR10ERTF9101	Rohm Semiconductor	9.1 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	0.65	Thick Film	Discontinued at DiGi Electronics

Engineering Selection Recommendations

Direct Substitutes (Identical 0.125W Power Rating):

The following parts provide direct functional equivalence to the RC2012F912CS with matching 0.125W power rating and identical electrical specifications:

CR0805-FX-9101ELF (Bourns Inc.): Active status, moisture-resistant, 25,610 units in stock. Suitable for general industrial applications.
RC0805FR-079K1L (YAGEO): Active status, moisture-resistant, 5,880 units in stock. Suitable for general industrial applications.
CRCW08059K10FKEA (Vishay Dale): Active status, AEC-Q200 certified, 1,600 units in stock. Suitable for automotive and industrial applications.
ERJ-6ENF9101V (Panasonic Electronic Components): Active status, AEC-Q200 certified, 43,276 units in stock. Suitable for automotive and industrial applications.
RMCF0805FT9K10 (Stackpole Electronics Inc): Active status, AEC-Q200 certified, 52,082 units in stock. Suitable for automotive and industrial applications.
KTR10EZPF9101 (Rohm Semiconductor): Active status, AEC-Q200 certified with high voltage capability, 1,652 units in stock. Suitable for automotive and industrial applications.
AC0805FR-079K1L (YAGEO): Active status, AEC-Q200 certified with moisture resistance, 22,273 units in stock. Suitable for automotive and industrial applications.

Similar Parts (Higher Power Ratings):

The following parts offer enhanced power dissipation capability and are suitable for applications where thermal performance requirements exceed the 0.125W specification:

CRCW08059K10FKEAHP (Vishay Dale): 0.5W power rating, AEC-Q200 certified, pulse withstanding capability, 3,382 units in stock.
ESR10EZPF9101 (Rohm Semiconductor): 0.4W power rating, AEC-Q200 certified, pulse withstanding capability, 14,787 units in stock.

Discontinued Parts:

MCR10ERTF9101 (Rohm Semiconductor): Discontinued at DiGi Electronics, 677 units in stock. Use only when existing inventory must be consumed or when legacy system maintenance requires exact part matching.

Selection Criteria:

Inventory Availability: Parts with higher stock levels (RMCF0805FT9K10 with 52,082 units, ERJ-6ENF9101V with 43,276 units) provide superior supply chain security.
Compliance Requirements: AEC-Q200 certified parts are required for automotive applications; non-certified parts are suitable for industrial and consumer applications.
Moisture Resistance: Parts explicitly rated for moisture resistance (CR0805-FX-9101ELF, RC0805FR-079K1L, AC0805FR-079K1L) are preferred for humid or corrosive environments.
Product Status: All recommended direct substitutes maintain Active status, ensuring continued manufacturer support and availability.

Frequently Asked Questions (FAQ)

Q: Can CRCW08059K10FKEAHP (0.5W) be used as a direct replacement for RC2012F912CS (0.125W)?

A: CRCW08059K10FKEAHP is electrically compatible with RC2012F912CS for all parameters except power rating. The higher 0.5W rating provides additional thermal margin and is suitable for applications where the original 0.125W specification is not a limiting constraint. However, the physical height differs (0.50mm vs 0.65mm), which may affect PCB layout clearances. Verify mechanical fit before substitution.

Q: What is the difference between Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® packaging?

A: Tape & Reel packaging is supplied on continuous carrier tape suitable for automated pick-and-place assembly. Cut Tape & Digi-Reel® packaging is supplied in shorter tape segments on reels. Both formats contain identical components with identical electrical and mechanical specifications. Packaging format selection depends on assembly equipment compatibility and order quantity requirements, not component performance.

Q: Are AEC-Q200 certified parts required for non-automotive applications?

A: AEC-Q200 certification is not required for non-automotive applications. However, AEC-Q200 certified parts meet stringent automotive reliability standards and are suitable for any application. Non-certified parts (such as CR0805-FX-9101ELF and RC0805FR-079K1L) are fully qualified for industrial and consumer applications and offer equivalent electrical performance.

Q: What does Moisture Sensitivity Level (MSL) 1 mean?

A: MSL 1 indicates unlimited shelf life without moisture baking requirements. All parts listed in this reference maintain MSL 1 rating, indicating no special moisture handling procedures are required during storage or assembly.

Q: Can I substitute a part with different height specifications?

A: Height differences are typically minor (0.50mm to 0.70mm range) and do not affect electrical function. However, verify that PCB layout clearances accommodate the substitute part's maximum seated height. Parts with lower height profiles (CRCW08059K10FKEA at 0.50mm) provide additional clearance margin for dense PCB designs.

Q: Why are some parts listed as "Similar" rather than "Direct" substitutes?

A: Parts are classified as "Direct Substitutes" when all electrical and mechanical parameters match exactly, including power rating. Parts are classified as "Similar" when one or more parameters differ (such as higher power rating or different features) but remain compatible for the intended application based on the allowed parameter set.

Q: Is RoHS3 compliance required for all applications?

A: All parts listed in this reference maintain ROHS3 compliance. RoHS3 compliance is mandatory for products sold in the European Union and is increasingly required by global supply chain standards. All listed parts meet this requirement.

Q: What is the significance of Temperature Coefficient ±100ppm/°C?

A: Temperature coefficient indicates resistance value change per degree Celsius. All parts listed maintain ±100ppm/°C, meaning resistance value will not deviate more than 0.01% per degree Celsius across the -55°C to 155°C operating range. This specification is identical across all substitute parts and does not affect substitution eligibility.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message