RC2012F8870CS 887 Ohm 1% 1/8W 0805 Chip Resistor Equivalent & Substitute Parts

Part Overview

The RC2012F8870CS is a thick film chip resistor manufactured by Samsung Electro-Mechanics with a resistance value of 887 Ohms and ±1% tolerance. This 0805 (2012 Metric) package component is rated for 0.125W (1/8W) power dissipation and operates across the temperature range of -55°C to 155°C. The part is classified as Active product status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified when manufacturers discontinue production, inventory becomes unavailable, or design requirements necessitate alternative sourcing from qualified suppliers while maintaining identical electrical and mechanical specifications.

Substiute Parts

RC2012F8870CS

Samsung Electro-MechanicsIn Stock: 833RC2012F8870CS Datasheet

Current PartRFQ

RC0805FR-07887RL

YAGEOIn Stock: 59832RC0805FR-07887RL Datasheet

DirectRFQ

CRCW0805887RFKEA

Vishay DaleIn Stock: 13389CRCW0805887RFKEA Datasheet

SimilarRFQ

ERJ-6ENF8870V

Panasonic Electronic ComponentsIn Stock: 80055ERJ-6ENF8870V Datasheet

SimilarRFQ

RMCF0805FT887R

Stackpole Electronics IncIn Stock: 37739RMCF0805FT887R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RC2012F8870CS is permissible with parts that maintain identical electrical specifications and mechanical compatibility. The critical parameters determining substitutability are: resistance value (887 Ohms), tolerance (±1%), power rating (0.125W), package designation (0805), composition (thick film), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C to 155°C). All identified substitute parts meet these core requirements. Physical dimensions remain consistent across all alternatives at 0.079" L x 0.049" W (2.00mm x 1.25mm), with seated heights ranging from 0.020" to 0.028" (0.50mm to 0.70mm), which fall within acceptable PCB assembly tolerances. RoHS3 compliance and MSL 1 rating are maintained across all substitutes. Substitutes are categorized as direct equivalents (RC0805FR-07887RL from YAGEO) and similar alternatives with automotive AEC-Q200 qualification (CRCW0805887RFKEA, ERJ-6ENF8870V, RMCF0805FT887R).

Parameter Comparison

Engineering Selection Recommendations

The RC0805FR-07887RL from YAGEO serves as the direct functional equivalent to the RC2012F8870CS, offering identical electrical and mechanical specifications without automotive qualification. This substitute is suitable for general industrial and consumer applications where AEC-Q200 certification is not required.

For applications requiring automotive-grade components, three alternatives are available: CRCW0805887RFKEA (Vishay Dale), ERJ-6ENF8870V (Panasonic Electronic Components), and RMCF0805FT887R (Stackpole Electronics Inc). All three parts carry AEC-Q200 qualification, indicating compliance with automotive reliability standards. These substitutes are appropriate for automotive, industrial, and mission-critical applications where enhanced quality assurance is specified.

Selection between automotive-qualified alternatives should be based on inventory availability and supply chain requirements. All parts maintain ROHS3 compliance and unlimited moisture sensitivity rating, ensuring compatibility with modern manufacturing processes and environmental regulations.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-07887RL be used as a direct replacement for RC2012F8870CS?

A: Yes. Both parts share identical resistance (887 Ohms), tolerance (±1%), power rating (0.125W), package designation (0805), composition (thick film), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C to 155°C). The seated height difference of 0.002" (0.06mm) is within standard PCB assembly tolerances.

Q: What is the difference between the Samsung part and the automotive-qualified substitutes?

A: The RC2012F8870CS does not carry AEC-Q200 automotive qualification. The CRCW0805887RFKEA, ERJ-6ENF8870V, and RMCF0805FT887R alternatives include AEC-Q200 certification, indicating compliance with automotive reliability and quality standards. All other electrical and mechanical parameters remain identical.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The RC2012F8870CS and all identified substitutes (RC0805FR-07887RL, CRCW0805887RFKEA, ERJ-6ENF8870V, RMCF0805FT887R) are ROHS3 compliant.

Q: Do the seated height variations affect PCB assembly?

A: No. Seated heights range from 0.020" to 0.028" (0.50mm to 0.70mm) across all parts. This 0.008" (0.20mm) variation is within standard PCB assembly and reflow soldering tolerances and does not affect component placement or functionality.

Q: Can these parts be used interchangeably in the same circuit design?

A: Yes. All parts maintain identical electrical specifications (887 Ohms ±1%, 0.125W, ±100ppm/°C, -55°C to 155°C). They are mechanically compatible with 0805 package footprints and can be substituted without circuit redesign.

Q: What is the moisture sensitivity level for all these parts?

A: All parts carry MSL 1 (Unlimited), indicating no moisture sensitivity restrictions. These components do not require special moisture control during storage, handling, or assembly.