RC2012F8250CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F8250CS is a 825 Ohm ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status with RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). The part is supplied in Tape & Reel packaging suitable for automated assembly processes. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and environmental ratings to ensure direct interchangeability in circuit applications.

Substiute Parts

RC2012F8250CS

Samsung Electro-MechanicsIn Stock: 719RC2012F8250CS Datasheet

Current PartRFQ

CR0805-FX-8250ELF

Bourns Inc.In Stock: 17136CR0805-FX-8250ELF Datasheet

DirectRFQ

ERJ-6ENF8250V

Panasonic Electronic ComponentsIn Stock: 60494ERJ-6ENF8250V Datasheet

DirectRFQ

RC0805FR-07825RL

YAGEOIn Stock: 543838RC0805FR-07825RL Datasheet

DirectRFQ

RMCF0805FT825R

Stackpole Electronics IncIn Stock: 101547RMCF0805FT825R Datasheet

DirectRFQ

CRCW0805825RFKEA

Vishay DaleIn Stock: 46267CRCW0805825RFKEA Datasheet

SimilarRFQ

RMCS0805FT825R

Stackpole Electronics IncIn Stock: 9746RMCS0805FT825R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC2012F8250CS is determined by strict equivalence across the following critical parameters:

Electrical Parameters: Resistance value (825 Ohms), tolerance (±1%), power rating (0.125W), and temperature coefficient (±100ppm/°C) must match exactly.

Mechanical Parameters: Package designation (0805 / 2012 Metric), number of terminations (2), and physical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) must be identical.

Environmental & Compliance Parameters: Operating temperature range (-55°C ~ 155°C), RoHS3 compliance, and MSL rating (1 - Unlimited) must be maintained.

Composition: Thick film construction is required for all substitutes.

Substitute parts are classified into two categories:

Direct Substitutes: Parts meeting all electrical, mechanical, and environmental specifications with identical or compatible feature sets (Moisture Resistant, Automotive AEC-Q200).

Similar Substitutes: Parts meeting all core electrical and mechanical specifications with alternative feature implementations (Anti-Sulfur coating) that do not compromise primary function.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute parts maintain full electrical and mechanical compatibility with the RC2012F8250CS. Selection among equivalent options is determined by application-specific requirements and feature requirements:

For General Industrial Applications: CR0805-FX-8250ELF (Bourns), RC0805FR-07825RL (YAGEO), and RMCS0805FT825R (Stackpole) provide moisture-resistant or anti-sulfur protection suitable for standard operating environments.

For Automotive Applications: ERJ-6ENF8250V (Panasonic), RMCF0805FT825R (Stackpole), and CRCW0805825RFKEA (Vishay Dale) carry AEC-Q200 automotive qualification and are suitable for automotive-grade circuit implementations.

For Space-Constrained Designs: CRCW0805825RFKEA (Vishay Dale) offers the lowest seated height at 0.50mm maximum, beneficial for applications with strict PCB thickness or stacking requirements.

All substitute parts are Active product status with RoHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, ensuring regulatory compliance and handling flexibility equivalent to the primary part.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-07825RL be used as a direct replacement for RC2012F8250CS in all applications?

A: Yes. RC0805FR-07825RL matches all critical electrical parameters (825Ω ±1%, 0.125W, ±100ppm/°C), mechanical specifications (0805 package, 2.00mm x 1.25mm), and environmental ratings (-55°C ~ 155°C, RoHS3, MSL 1). The 0.60mm seated height is within acceptable PCB assembly tolerances.

Q: What is the difference between moisture-resistant and anti-sulfur variants?

A: Moisture-resistant variants (CR0805-FX-8250ELF, RC0805FR-07825RL) provide protection against humidity ingress. Anti-sulfur variants (RMCS0805FT825R) provide protection against sulfur-containing atmospheric contaminants. Both maintain identical electrical performance and MSL 1 rating. Selection depends on environmental exposure conditions.

Q: Are automotive-qualified parts (AEC-Q200) suitable for non-automotive applications?

A: Yes. Automotive-qualified parts (ERJ-6ENF8250V, RMCF0805FT825R, CRCW0805825RFKEA) meet or exceed industrial specifications and are fully compatible with non-automotive applications. AEC-Q200 qualification indicates enhanced reliability testing and is not restrictive to automotive use only.

Q: Does seated height variation affect PCB assembly compatibility?

A: Seated height variations (0.50mm to 0.70mm) are within standard 0805 package tolerances and do not affect PCB assembly compatibility. All listed parts are compatible with standard pick-and-place equipment and reflow processes.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All listed substitute parts are supplied in Tape & Reel (TR) packaging format suitable for automated assembly processes, matching the packaging specification of RC2012F8250CS.

Q: What inventory considerations apply when selecting substitutes?

A: Inventory availability varies by manufacturer. RC0805FR-07825RL (YAGEO) shows highest inventory at 543,748 pieces. ERJ-6ENF8250V (Panasonic) provides 60,412 pieces. All listed parts are classified as New Original In Stock, ensuring supply chain reliability.