RC2012F76R8CS Equivalent & Substitute Parts

Part Overview

The RC2012F76R8CS is a 76.8 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in the 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and operates across the temperature range of -55°C to 155°C. The part is currently in active production status with moisture-resistant construction and ROHS3 compliance. Equivalent and substitute parts are identified to support procurement flexibility, inventory management, and supply chain continuity.

Substiute Parts

RC2012F76R8CS

Samsung Electro-MechanicsIn Stock: 1183RC2012F76R8CS Datasheet

Current PartRFQ

RC0805FR-0776R8L

YAGEOIn Stock: 7749RC0805FR-0776R8L Datasheet

DirectRFQ

ERJ-6ENF76R8V

Panasonic Electronic ComponentsIn Stock: 51411ERJ-6ENF76R8V Datasheet

SimilarRFQ

RMCF0805FT76R8

Stackpole Electronics IncIn Stock: 2006RMCF0805FT76R8 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the RC2012F76R8CS is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 76.8 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package format: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture Sensitivity Level: 1 (Unlimited)
• RoHS compliance: ROHS3 Compliant
• Number of terminations: 2

All identified substitute parts meet these parameters. Substitute parts are classified as either direct equivalents or similar alternatives based on manufacturer designation and feature alignment. Direct equivalents maintain identical electrical and mechanical specifications. Similar alternatives provide equivalent electrical performance with additional certifications such as AEC-Q200 automotive qualification.

Parameter Comparison

Engineering Selection Recommendations

All four parts listed are active production components with ROHS3 compliance and REACH unaffected status, making them suitable for new designs and ongoing production applications.

RC0805FR-0776R8L (YAGEO): Direct electrical and mechanical equivalent with the lowest seated height specification (0.024" / 0.60mm). Suitable for space-constrained PCB layouts. High inventory availability (7734 units) supports consistent supply.

ERJ-6ENF76R8V (Panasonic): Includes AEC-Q200 automotive qualification in addition to standard specifications. Highest seated height (0.028" / 0.70mm). Recommended for automotive and mission-critical applications requiring automotive-grade component certification. Largest inventory availability (51311 units).

RMCF0805FT76R8 (Stackpole): Includes AEC-Q200 automotive qualification. Seated height of 0.026" (0.65mm) matches the original Samsung part. Suitable for automotive applications with moderate inventory availability (1989 units).

Selection between these parts depends on application requirements, PCB layout constraints, and supply chain preferences. All parts are electrically and mechanically interchangeable within the specified parameters.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-0776R8L replace RC2012F76R8CS in existing designs?

A: Yes. RC0805FR-0776R8L is a direct electrical equivalent with identical resistance, tolerance, power rating, temperature coefficient, and operating range. The seated height difference (0.024" versus 0.026") is within typical PCB assembly tolerances and does not affect functionality. Verify PCB layout clearances if height-critical applications exist.

Q: What is the difference between the Samsung part and the Panasonic ERJ-6ENF76R8V?

A: Both parts meet identical electrical specifications. The Panasonic part includes AEC-Q200 automotive qualification, which is not present in the Samsung part. The Panasonic part has a maximum seated height of 0.028" compared to 0.026" for the Samsung part. Select the Panasonic part for automotive applications requiring AEC-Q200 certification.

Q: Are the Panasonic and Stackpole parts interchangeable?

A: Yes. Both ERJ-6ENF76R8V and RMCF0805FT76R8 meet identical electrical specifications and both carry AEC-Q200 automotive qualification. The seated height specifications differ slightly (0.028" versus 0.026"). Both are suitable for automotive and general industrial applications.

Q: Does the 0805 package format remain consistent across all substitute parts?

A: Yes. All substitute parts use the 0805 (2012 Metric) package format with identical length (0.079" / 2.00mm) and width (0.049" / 1.25mm) dimensions. Seated height varies within a narrow range (0.024" to 0.028") and does not affect standard PCB assembly processes.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All four parts listed are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for commercial and industrial applications.

Q: What is the significance of Moisture Sensitivity Level 1?

A: MSL 1 (Unlimited) indicates the component has unlimited shelf life and does not require special moisture control during storage or handling. All substitute parts carry this same MSL rating.