RC2012F7321CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F7321CS is a 7.32 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with moisture-resistant characteristics and ROHS3 compliance. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and environmental ratings to ensure direct functional replacement in circuit applications.

Substiute Parts

RC2012F7321CS

Samsung Electro-MechanicsIn Stock: 1175RC2012F7321CS Datasheet

Current PartRFQ

ERJ-6ENF7321V

Panasonic Electronic ComponentsIn Stock: 81040ERJ-6ENF7321V Datasheet

DirectRFQ

RC0805FR-077K32L

YAGEOIn Stock: 57078RC0805FR-077K32L Datasheet

DirectRFQ

RMCF0805FT7K32

Stackpole Electronics IncIn Stock: 31787RMCF0805FT7K32 Datasheet

DirectRFQ

CRCW08057K32FKEA

Vishay DaleIn Stock: 20990CRCW08057K32FKEA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC2012F7321CS are qualified based on the following critical parameters that determine functional equivalence:

Electrical Parameters:

• Resistance value: 7.32 kOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters:

• Package type: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Number of terminations: 2
• Composition: Thick Film

Compliance & Environmental:

• RoHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected
• Packaging: Tape & Reel (TR)

All identified substitute parts match these core parameters. Additional features such as Automotive AEC-Q200 certification represent enhanced qualification levels and do not prevent substitution in non-automotive applications.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts are functionally equivalent to the RC2012F7321CS based on matching electrical and mechanical specifications. Selection among these alternatives is determined by application requirements and supply chain considerations:

Standard Industrial Applications: RC0805FR-077K32L (YAGEO) and RC2012F7321CS (Samsung) are suitable for general-purpose applications requiring moisture-resistant thick film resistors with standard industrial compliance.

Automotive Applications: ERJ-6ENF7321V (Panasonic), RMCF0805FT7K32 (Stackpole), and CRCW08057K32FKEA (Vishay Dale) carry Automotive AEC-Q200 certification and are qualified for automotive-grade circuit designs.

PCB Assembly Considerations: Height-seated maximum values range from 0.020" to 0.028" across all parts. CRCW08057K32FKEA (Vishay Dale) has the lowest profile at 0.020" (0.50mm), while ERJ-6ENF7321V (Panasonic) has the highest at 0.028" (0.70mm). All values remain within standard 0805 package specifications and do not affect PCB layout compatibility.

Compliance & Regulatory: All substitute parts maintain ROHS3 compliance, REACH Unaffected status, and Moisture Sensitivity Level 1 (Unlimited), ensuring regulatory equivalence across all identified alternatives.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF7321V replace RC2012F7321CS in non-automotive applications?

A: Yes. ERJ-6ENF7321V meets all electrical and mechanical specifications required for the RC2012F7321CS. Automotive AEC-Q200 certification represents additional qualification and does not restrict use in standard industrial applications.

Q: Are there height differences that affect PCB assembly?

A: Height-seated maximum values vary between 0.020" and 0.028" across substitute parts. All values conform to standard 0805 package specifications. Height differences do not affect PCB layout compatibility or reflow soldering processes.

Q: Do all substitute parts have the same moisture sensitivity rating?

A: Yes. All identified substitute parts carry Moisture Sensitivity Level 1 (Unlimited), indicating equivalent moisture handling and storage requirements.

Q: Is the 7.32 kOhms ±1% tolerance maintained across all substitutes?

A: Yes. All substitute parts specify 7.32 kOhms with ±1% tolerance, ensuring equivalent circuit performance and signal accuracy.

Q: Can substitute parts be mixed in the same production batch?

A: Yes. All substitute parts are functionally equivalent and carry identical electrical specifications, tolerance, power rating, and operating temperature range. Substitution is based on availability and supply chain requirements.

Q: What is the operating temperature range for all parts?

A: All parts operate across -55°C to 155°C, providing equivalent thermal performance for industrial and automotive temperature environments.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All identified substitute parts are supplied in Tape & Reel (TR) packaging, maintaining compatibility with automated assembly equipment.