RC2012F7150CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F7150CS is a 715 Ohms ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status with moisture resistant characteristics and ROHS3 compliance. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings align with the original component, enabling direct replacement in circuit applications without design modification.

Key Parameters

Parameter	Value
Resistance	715 Ohms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution validity for the RC2012F7150CS is determined by strict equivalence across the following parameters:

Electrical Equivalence Requirements:

Resistance value: 715 Ohms (exact match)
Tolerance: ±1% (exact match)
Power rating: 0.125W / 1/8W (exact match)
Temperature coefficient: ±100ppm/°C (exact match)
Operating temperature range: -55°C ~ 155°C (exact match)

Mechanical Equivalence Requirements:

Package / Case: 0805 (2012 Metric) (exact match)
Number of terminations: 2 (exact match)
Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm) (exact match)

Environmental & Compliance Requirements:

Moisture Sensitivity Level: 1 (Unlimited) (exact match)
RoHS Status: ROHS3 Compliant (minimum requirement)
REACH Status: REACH Unaffected (minimum requirement)

All identified substitute parts meet these criteria. Packaging format (Cut Tape vs. Tape & Reel) and specific feature designations (Moisture Resistant vs. Automotive AEC-Q200) do not prevent substitution when all electrical, mechanical, and environmental parameters are equivalent.

Parameter Comparison

Manufacturer	Part Number	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op. Temp Range	Height Max	MSL	RoHS	Product Status	Packaging Type
Samsung Electro-Mechanics	RC2012F7150CS	715 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.026" (0.65mm)	1	ROHS3	Active	Cut Tape (CT)
Bourns Inc.	CR0805-FX-7150ELF	715 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.024" (0.60mm)	1	ROHS3	Active	Tape & Reel (TR)
Panasonic Electronic Components	ERJ-6ENF7150V	715 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.028" (0.70mm)	1	ROHS3	Active	Tape & Reel (TR)
YAGEO	RC0805FR-07715RL	715 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.024" (0.60mm)	1	ROHS3	Active	Tape & Reel (TR)
Stackpole Electronics Inc	RMCF0805FT715R	715 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.026" (0.65mm)	1	ROHS3	Active	Tape & Reel (TR)
Vishay Dale	CRCW0805715RFKEA	715 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.020" (0.50mm)	1	ROHS3	Active	Tape & Reel (TR)
Rohm Semiconductor	MCR10ERTF7150	715 Ω	±1%	0.125	0805	±100ppm/°C	-55°C ~ 155°C	0.026" (0.65mm)	1	ROHS3	Discontinued at DiGi Electronics	Cut Tape (CT) & Digi-Reel®

Engineering Selection Recommendations

Direct Substitutes (Active Product Status):

CR0805-FX-7150ELF, ERJ-6ENF7150V, RC0805FR-07715RL, RMCF0805FT715R, and CRCW0805715RFKEA are all Active products with full ROHS3 compliance and REACH Unaffected status. These components are suitable for direct replacement in applications requiring 715 Ohms ±1% 0.125W thick film resistors in 0805 package format. All maintain identical electrical specifications and operating temperature range (-55°C ~ 155°C) with Moisture Sensitivity Level 1.

Automotive-Qualified Alternatives:

ERJ-6ENF7150V (Panasonic) and RMCF0805FT715R (Stackpole) carry AEC-Q200 automotive qualification. These components are appropriate for applications requiring automotive-grade reliability and traceability, while maintaining full electrical and mechanical equivalence to the RC2012F7150CS.

Discontinued Product Consideration:

MCR10ERTF7150 (Rohm Semiconductor) is listed as Discontinued at DiGi Electronics. While electrically and mechanically equivalent, this part should not be selected for new designs or long-term supply chain planning.

Packaging Format Consideration:

The RC2012F7150CS is supplied in Cut Tape (CT) format. Substitute parts are predominantly available in Tape & Reel (TR) format. Both packaging formats contain identical components; packaging selection depends on assembly process requirements and volume specifications.

Frequently Asked Questions (FAQ)

Q: Can CR0805-FX-7150ELF replace RC2012F7150CS in production assembly?

A: Yes. CR0805-FX-7150ELF meets all electrical, mechanical, and environmental equivalence criteria. The component is Active status, ROHS3 compliant, and maintains identical resistance (715 Ω), tolerance (±1%), power rating (0.125W), and operating temperature range (-55°C ~ 155°C). Packaging format differs (Tape & Reel vs. Cut Tape), which affects supply chain logistics but not component functionality.

Q: What is the difference between moisture-resistant and automotive AEC-Q200 variants?

A: Both feature designations indicate different qualification pathways. Moisture-resistant variants (CR0805-FX-7150ELF, RC0805FR-07715RL) are qualified for general industrial applications with moisture protection. Automotive AEC-Q200 variants (ERJ-6ENF7150V, RMCF0805FT715R, CRCW0805715RFKEA) undergo additional automotive-specific reliability testing and traceability requirements. Both meet ROHS3 compliance and are electrically equivalent. Selection depends on application requirements, not component performance.

Q: Are height variations between substitute parts significant?

A: Height variations range from 0.020" (0.50mm) to 0.028" (0.70mm) maximum seated height. All values fall within standard 0805 package specifications. Height differences do not affect electrical performance or PCB assembly compatibility. Selection based on height is necessary only for applications with specific mechanical clearance constraints.

Q: Why is MCR10ERTF7150 listed if it is discontinued?

A: MCR10ERTF7150 is included in the reference for historical traceability and legacy design documentation. The part is electrically and mechanically equivalent but should not be selected for new designs due to discontinued status. Existing designs using this component should transition to Active alternatives.

Q: Can substitute parts be mixed in the same production batch?

A: Yes. All identified substitute parts are electrically and mechanically equivalent with identical specifications. Mixed sourcing from multiple manufacturers is permissible when supply constraints require it. Ensure procurement documentation clearly identifies part numbers and manufacturers for traceability.

Q: What compliance certifications apply to all substitute parts?

A: All substitute parts listed maintain ROHS3 compliance and REACH Unaffected status, matching the RC2012F7150CS. Moisture Sensitivity Level is 1 (Unlimited) across all variants. No additional environmental or regulatory qualifications are required for standard industrial applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message