RC2012F6983CS Equivalent & Substitute Parts

Part Overview

The RC2012F6983CS is a 698 kOhms ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status with RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). The part is supplied in Tape & Reel packaging suitable for automated assembly processes. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and package compatibility to support procurement flexibility and supply chain continuity.

Substiute Parts

RC2012F6983CS

Samsung Electro-MechanicsIn Stock: 841RC2012F6983CS Datasheet

Current PartRFQ

RC0805FR-07698KL

YAGEOIn Stock: 43782RC0805FR-07698KL Datasheet

DirectRFQ

CRCW0805698KFKEA

Vishay DaleIn Stock: 14569CRCW0805698KFKEA Datasheet

SimilarRFQ

ERJ-6ENF6983V

Panasonic Electronic ComponentsIn Stock: 16311ERJ-6ENF6983V Datasheet

SimilarRFQ

RMCF0805FT698K

Stackpole Electronics IncIn Stock: 14029RMCF0805FT698K Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC2012F6983CS is determined by strict equivalence across the following parameters: resistance value (698 kOhms), tolerance (±1%), power rating (0.125W), composition (thick film), package format (0805), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), and compliance certifications (RoHS3, REACH Unaffected). All identified substitute parts meet these core electrical and mechanical requirements. Dimensional variations in seated height are within acceptable tolerances for 0805 package specifications and do not affect circuit performance or PCB assembly compatibility. Substitute parts are grouped as direct equivalents based on matching all critical parameters, with some variants offering additional automotive qualification (AEC-Q200) that provides enhanced reliability for demanding applications.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts are functionally equivalent to the RC2012F6983CS and maintain full compatibility with existing circuit designs and PCB layouts. Selection among these alternatives is based on availability, supply chain considerations, and application-specific requirements.

RC0805FR-07698KL (YAGEO) provides direct electrical and mechanical equivalence without automotive qualification. This part is suitable for general industrial and consumer applications where AEC-Q200 certification is not required.

CRCW0805698KFKEA (Vishay Dale), ERJ-6ENF6983V (Panasonic), and RMCF0805FT698K (Stackpole) all include AEC-Q200 automotive qualification. These parts are specified for applications requiring enhanced reliability, extended temperature cycling validation, and automotive-grade component traceability. AEC-Q200 certification indicates compliance with automotive industry standards for passive components and is applicable to both automotive and high-reliability industrial applications.

All substitute parts maintain RoHS3 compliance and REACH unaffected status, ensuring regulatory conformance across global markets. Seated height variations among the 0805 package options remain within standard PCB assembly tolerances and do not impact component placement or solder joint integrity.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-07698KL (YAGEO) be used as a direct replacement for RC2012F6983CS (Samsung)?

A: Yes. Both parts share identical electrical specifications (698 kOhms, ±1%, 0.125W), composition (thick film), package format (0805), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C ~ 155°C). Seated height difference (0.024" vs 0.026") is within 0805 package tolerance and does not affect PCB assembly or circuit performance.

Q: What is the difference between the non-automotive RC0805FR-07698KL and the AEC-Q200 qualified alternatives?

A: RC0805FR-07698KL does not carry AEC-Q200 automotive qualification. The AEC-Q200 qualified parts (CRCW0805698KFKEA, ERJ-6ENF6983V, RMCF0805FT698K) have undergone additional validation testing for automotive applications including thermal cycling, humidity resistance, and extended reliability assessment. Selection depends on application requirements; automotive-grade parts are specified for automotive and high-reliability industrial circuits.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All identified substitute parts are supplied in Tape & Reel (TR) packaging format, maintaining compatibility with automated assembly equipment and standard component handling processes.

Q: Do the substitute parts meet the same compliance requirements as the original RC2012F6983CS?

A: Yes. All substitute parts are RoHS3 compliant and REACH unaffected, matching the regulatory status of the original part. Moisture Sensitivity Level (MSL 1 - Unlimited) is consistent across all options.

Q: What is the significance of the seated height variations among these 0805 parts?

A: Seated height variations (0.020" to 0.028") are within the standard tolerance range for 0805 (2012 Metric) package specifications. These differences do not affect PCB design, component placement accuracy, or solder joint formation during reflow assembly. All parts are mechanically compatible with standard 0805 footprints.

Q: Can I mix different manufacturers' parts in the same production run?

A: Yes. All substitute parts meet identical electrical and mechanical specifications, allowing interchangeable use within the same circuit design and PCB layout. However, procurement and quality control procedures should document any manufacturer changes for traceability and supply chain management purposes.