RC2012F6980CS 698 Ohm 1% 1/8W 0805 Chip Resistor Equivalent & Substitute Parts

Part Overview

The RC2012F6980CS is a 698 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and features moisture-resistant construction suitable for general industrial and commercial applications. The part maintains Active product status with 1068 units currently in stock. Equivalent and substitute parts are identified when component availability is limited, supply chain disruptions occur, or design flexibility permits alternative qualified manufacturers while maintaining electrical and mechanical compatibility.

Substiute Parts

RC2012F6980CS

Samsung Electro-MechanicsIn Stock: 1112RC2012F6980CS Datasheet

Current PartRFQ

RC0805FR-07698RL

YAGEOIn Stock: 21455RC0805FR-07698RL Datasheet

DirectRFQ

CRCW0805698RFKEA

Vishay DaleIn Stock: 26324CRCW0805698RFKEA Datasheet

SimilarRFQ

ERJ-6ENF6980V

Panasonic Electronic ComponentsIn Stock: 84778ERJ-6ENF6980V Datasheet

SimilarRFQ

RMCF0805FT698R

Stackpole Electronics IncIn Stock: 25202RMCF0805FT698R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC2012F6980CS is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 698 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture Sensitivity Level: 1 (Unlimited)
• RoHS compliance: ROHS3 Compliant

All identified substitute parts meet these mandatory parameters. Substitute parts are classified as Direct Manufacturer Equivalents or Similar Manufacturer Parts based on feature alignment. Direct equivalents maintain identical moisture-resistant specifications. Similar parts may include additional automotive AEC-Q200 qualification, which represents an enhancement rather than a deviation from base specifications.

Parameter Comparison

Engineering Selection Recommendations

RC0805FR-07698RL (YAGEO - Direct Equivalent)

The RC0805FR-07698RL represents a direct functional equivalent with identical electrical specifications and moisture-resistant thick film construction. YAGEO maintains Active product status with 21414 units in inventory. This part is suitable for direct substitution in applications where automotive qualification is not required. The seated height of 0.024" (0.60mm) is within acceptable PCB assembly tolerances relative to the original part.

CRCW0805698RFKEA (Vishay Dale - Similar with AEC-Q200)

The CRCW0805698RFKEA meets all mandatory electrical and mechanical parameters while incorporating AEC-Q200 automotive qualification. Vishay Dale maintains Active product status with 26253 units available. This part is suitable for substitution in both general industrial and automotive applications. The reduced seated height of 0.020" (0.50mm) provides additional clearance margin in space-constrained PCB layouts.

ERJ-6ENF6980V (Panasonic - Similar with AEC-Q200)

The ERJ-6ENF6980V satisfies all mandatory specifications with AEC-Q200 automotive qualification. Panasonic maintains Active product status with 84678 units in stock. This part is suitable for substitution across general industrial and automotive applications. The seated height of 0.028" (0.70mm) remains within standard PCB assembly specifications.

RMCF0805FT698R (Stackpole Electronics - Similar with AEC-Q200)

The RMCF0805FT698R meets all mandatory electrical and mechanical parameters with AEC-Q200 automotive qualification. Stackpole Electronics maintains Active product status with 25172 units available. This part is suitable for substitution in both general industrial and automotive applications. The seated height of 0.026" (0.65mm) matches the original part specification.

All substitute parts maintain ROHS3 compliance, REACH unaffected status, and identical MSL ratings. Selection among substitutes is based on availability, supply chain preference, and application-specific automotive requirements.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-07698RL replace RC2012F6980CS in any application?

A: Yes. The RC0805FR-07698RL is a direct equivalent with identical resistance, tolerance, power rating, package, composition, temperature coefficient, and operating temperature range. Both parts feature MSL 1 (Unlimited) moisture sensitivity and ROHS3 compliance. Substitution is electrically and mechanically valid for all applications where the original part is specified.

Q: What is the difference between the original part and the AEC-Q200 qualified substitutes?

A: The original RC2012F6980CS is a general industrial thick film resistor. The CRCW0805698RFKEA, ERJ-6ENF6980V, and RMCF0805FT698R include AEC-Q200 automotive qualification, which represents additional testing and reliability validation for automotive applications. All parts maintain identical electrical specifications and operating parameters. AEC-Q200 qualification does not alter the component's suitability for general industrial use.

Q: Are there any height differences that affect PCB assembly?

A: Seated heights vary slightly: RC2012F6980CS (0.66mm), RC0805FR-07698RL (0.60mm), CRCW0805698RFKEA (0.50mm), ERJ-6ENF6980V (0.70mm), and RMCF0805FT698R (0.65mm). These variations are within standard 0805 package tolerances and do not affect PCB assembly processes or component placement. All parts are compatible with standard pick-and-place equipment and reflow soldering profiles.

Q: Can I use an AEC-Q200 qualified part in a non-automotive application?

A: Yes. AEC-Q200 qualification represents enhanced reliability testing and is fully backward compatible with general industrial applications. Using an AEC-Q200 qualified part in a non-automotive application introduces no technical risk or incompatibility.

Q: What is MSL 1 (Unlimited) moisture sensitivity?

A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity limitations. The part does not require special dry-pack storage, desiccant handling, or bake-out procedures prior to soldering. This rating applies to all listed parts and the original component.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All identified substitute parts are supplied in Tape & Reel (TR) packaging format, matching the original RC2012F6980CS packaging specification. This ensures compatibility with automated assembly equipment and standard component handling procedures.

Q: What compliance certifications apply to all parts?

A: All parts maintain ROHS3 compliance and REACH unaffected status. These certifications are consistent across the original part and all substitutes, ensuring regulatory compliance for both industrial and commercial applications.