RC2012F6190CS 619 Ohm 1% 1/8W 0805 Chip Resistor Equivalent & Substitute Parts

Part Overview

The RC2012F6190CS is a 619 Ohm ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with moisture resistant construction. Substitute parts are identified when original inventory becomes unavailable, when alternative manufacturers offer equivalent electrical and mechanical specifications, or when specific application requirements necessitate alternative feature sets such as automotive qualification or enhanced environmental protection.

Substiute Parts

RC2012F6190CS

Samsung Electro-MechanicsIn Stock: 967RC2012F6190CS Datasheet

Current PartRFQ

RC0805FR-07619RL

YAGEOIn Stock: 41299RC0805FR-07619RL Datasheet

DirectRFQ

CRCW0805619RFKEA

Vishay DaleIn Stock: 29374CRCW0805619RFKEA Datasheet

SimilarRFQ

ERJ-6ENF6190V

Panasonic Electronic ComponentsIn Stock: 31276ERJ-6ENF6190V Datasheet

SimilarRFQ

RMCF0805FT619R

Stackpole Electronics IncIn Stock: 25755RMCF0805FT619R Datasheet

SimilarRFQ

RMCS0805FT619R

Stackpole Electronics IncIn Stock: 658RMCS0805FT619R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC2012F6190CS are qualified based on the following criteria:

Electrical Parameters (Must Match Exactly):

• Resistance value: 619 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Must Match Exactly):

• Package / Case: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Number of terminations: 2

Compliance Parameters (Must Match or Exceed):

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level: 1 (Unlimited)
• REACH Status: REACH Unaffected

All identified substitute parts meet these core requirements. Additional features such as automotive AEC-Q200 qualification or anti-sulfur construction represent enhanced capabilities beyond the base specification and do not prevent substitution in applications where the base specification is sufficient.

Parameter Comparison

Engineering Selection Recommendations

Direct Substitution (Electrically and Mechanically Equivalent):

All listed substitute parts satisfy the core electrical and mechanical requirements of the RC2012F6190CS. Selection among these parts depends on application-specific requirements and availability:

• RC0805FR-07619RL (YAGEO): Provides direct equivalence with moisture resistant construction matching the original specification. Suitable for general industrial applications where the base specification is the primary requirement.

• CRCW0805619RFKEA (Vishay Dale): Includes automotive AEC-Q200 qualification. Select this part for automotive applications or when enhanced reliability documentation is required. Lowest profile height (0.50mm) may be advantageous in space-constrained designs.

• ERJ-6ENF6190V (Panasonic Electronic Components): Includes automotive AEC-Q200 qualification. Select for automotive applications. Highest profile height (0.70mm) requires verification against PCB assembly constraints.

• RMCF0805FT619R (Stackpole Electronics Inc): Includes automotive AEC-Q200 qualification. Select for automotive applications with standard profile height (0.65mm).

• RMCS0805FT619R (Stackpole Electronics Inc): Includes anti-sulfur construction for enhanced environmental protection. Select for applications in corrosive environments or when extended service life in harsh conditions is required. Limited inventory (648 pcs) compared to other options.

All substitute parts maintain ROHS3 compliance, MSL Level 1 rating, and REACH unaffected status, ensuring regulatory compliance across industrial and consumer applications.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-07619RL replace RC2012F6190CS in any application?

A: Yes. RC0805FR-07619RL meets all electrical and mechanical specifications of RC2012F6190CS. Both components share identical resistance (619 Ω), tolerance (±1%), power rating (0.125W), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), package (0805), and compliance certifications (ROHS3, MSL 1). The 0.06mm difference in seated height (0.60mm vs 0.66mm) is within standard PCB assembly tolerances.

Q: What is the difference between automotive-qualified parts and non-automotive parts in this list?

A: CRCW0805619RFKEA, ERJ-6ENF6190V, and RMCF0805FT619R carry AEC-Q200 automotive qualification, indicating compliance with automotive reliability and testing standards. RC0805FR-07619RL and RMCS0805FT619R do not carry this designation. For non-automotive applications, automotive-qualified parts function identically to non-qualified parts and may be used interchangeably. For automotive applications, AEC-Q200 qualified parts are required.

Q: Why does RMCS0805FT619R have lower inventory than other substitutes?

A: RMCS0805FT619R includes anti-sulfur construction, a specialized feature for applications in corrosive environments. This feature reduces demand compared to standard thick film resistors, resulting in lower inventory levels (648 pcs vs 25,000+ pcs for other options). Select this part only when anti-sulfur protection is a specific application requirement.

Q: Are there any height restrictions when selecting among these substitutes?

A: Component heights range from 0.50mm (CRCW0805619RFKEA) to 0.70mm (ERJ-6ENF6190V), a 0.20mm variation. Verify PCB assembly specifications and solder reflow profiles to confirm compatibility. Most standard PCB designs accommodate this variation without modification. Consult PCB layout guidelines if clearance is critical.

Q: Do all substitute parts have the same moisture sensitivity level?

A: Yes. All parts listed, including the original RC2012F6190CS, carry MSL Level 1 (Unlimited) rating. This indicates no moisture sensitivity restrictions during storage, handling, or assembly. All parts are suitable for standard manufacturing environments without special moisture control measures.

Q: Can I use RMCF0805FT619R in place of RC2012F6190CS for industrial applications?

A: Yes. RMCF0805FT619R meets all electrical and mechanical specifications required for industrial applications. The AEC-Q200 automotive qualification does not restrict use in industrial applications; it indicates additional reliability testing has been performed. Industrial applications benefit from this enhanced qualification without additional cost or performance trade-offs.