RC2012F5762CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F5762CS is a 57.6 kOhms ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) surface mount package format. This component is classified as Active product status with moisture resistant characteristics and RoHS3 compliance. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings are maintained across alternative manufacturers while preserving functional compatibility in circuit applications.

Substiute Parts

RC2012F5762CS

Samsung Electro-MechanicsIn Stock: 801RC2012F5762CS Datasheet

Current PartRFQ

RC0805FR-0757K6L

YAGEOIn Stock: 28234RC0805FR-0757K6L Datasheet

DirectRFQ

CRCW080557K6FKEA

Vishay DaleIn Stock: 21790CRCW080557K6FKEA Datasheet

SimilarRFQ

ERJ-6ENF5762V

Panasonic Electronic ComponentsIn Stock: 128810ERJ-6ENF5762V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC2012F5762CS are qualified based on strict equivalence of the following parameters:

Electrical Equivalence Criteria:

• Resistance value: 57.6 kOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.125W / 1/8W (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)

Mechanical Equivalence Criteria:

• Package / Case: 0805 (2012 Metric) (exact match required)
• Number of terminations: 2 (exact match required)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm) (exact match required)

Compliance & Environmental Criteria:

• RoHS3 Compliant (required)
• Moisture Sensitivity Level: 1 (Unlimited) (required)
• REACH Status: REACH Unaffected (required)

All identified substitute parts maintain these parameters without deviation. Substitution is valid only when all electrical, mechanical, and compliance specifications are identical to the main part.

Parameter Comparison

Engineering Selection Recommendations

All four parts listed maintain Active product status and full compliance with RoHS3 and REACH requirements. Selection among these equivalent parts is determined by application-specific requirements and supply chain considerations:

RC2012F5762CS (Samsung Electro-Mechanics): Primary specification reference. Moisture resistant thick film composition. Current inventory: 752 Pcs.

RC0805FR-0757K6L (YAGEO): Direct electrical and mechanical equivalent. Moisture resistant thick film composition. Seated height 0.024" (0.60mm). Current inventory: 28,127 Pcs.

CRCW080557K6FKEA (Vishay Dale): Electrical and mechanical equivalent with automotive AEC-Q200 qualification. Seated height 0.020" (0.50mm). Current inventory: 21,699 Pcs.

ERJ-6ENF5762V (Panasonic Electronic Components): Electrical and mechanical equivalent with automotive AEC-Q200 qualification. Seated height 0.028" (0.70mm). Current inventory: 128,760 Pcs.

All parts are suitable for direct substitution based on provided specifications. Seated height variations are within acceptable PCB assembly tolerances for 0805 package format.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-0757K6L replace RC2012F5762CS in existing designs?

A: Yes. Both parts share identical electrical specifications (57.6 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C), mechanical package (0805 / 2012 Metric), and compliance certifications (RoHS3, REACH Unaffected, MSL 1). Seated height difference (0.024" vs 0.026") is within standard PCB assembly tolerances.

Q: What is the difference between CRCW080557K6FKEA and ERJ-6ENF5762V?

A: Both parts are electrically and mechanically equivalent to the main part. The primary difference is seated height: CRCW080557K6FKEA measures 0.020" (0.50mm) while ERJ-6ENF5762V measures 0.028" (0.70mm). Both carry AEC-Q200 automotive qualification. Selection depends on PCB assembly height constraints.

Q: Are all substitute parts suitable for automotive applications?

A: CRCW080557K6FKEA and ERJ-6ENF5762V carry AEC-Q200 automotive qualification. RC2012F5762CS and RC0805FR-0757K6L do not list AEC-Q200 qualification. For automotive applications requiring AEC-Q200 compliance, use CRCW080557K6FKEA or ERJ-6ENF5762V.

Q: What does Moisture Sensitivity Level 1 mean?

A: MSL 1 indicates unlimited shelf life without moisture bake requirements. All listed parts have MSL 1 rating, allowing standard storage and handling without special moisture control procedures.

Q: Can these parts be used interchangeably in high-temperature applications?

A: Yes. All parts share identical operating temperature range (-55°C ~ 155°C) and temperature coefficient (±100ppm/°C). Interchangeability is maintained across the full specified temperature range.

Q: What is the significance of the 0805 package designation?

A: 0805 refers to the metric 2012 package size (0.079" L x 0.049" W / 2.00mm x 1.25mm). All substitute parts use this identical package, ensuring PCB footprint compatibility and automated assembly compatibility.