RC2012F5624CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F5624CS is a 5.62 MOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with moisture-resistant construction suitable for general industrial and commercial applications. Substitute parts are identified to provide alternative sourcing options when the primary part becomes unavailable or when design requirements necessitate components with enhanced specifications such as automotive qualification.

Substiute Parts

RC2012F5624CS

Samsung Electro-MechanicsIn Stock: 780RC2012F5624CS Datasheet

Current PartRFQ

RC0805FR-075M62L

YAGEOIn Stock: 9165RC0805FR-075M62L Datasheet

DirectRFQ

CRCW08055M62FKEA

Vishay DaleIn Stock: 12732CRCW08055M62FKEA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC2012F5624CS is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 5.62 MOhms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• Moisture Sensitivity Level: 1 (Unlimited)
• RoHS compliance: ROHS3 Compliant

All identified substitute parts meet these mandatory parameters. Physical dimensions (length, width, and seated height) may vary within acceptable PCB assembly tolerances. Substitute parts are grouped into two categories: Direct equivalents sharing identical specifications, and similar parts offering enhanced certifications for specialized applications.

Parameter Comparison

Engineering Selection Recommendations

RC0805FR-075M62L (YAGEO): This part is a direct functional equivalent to the RC2012F5624CS. Both components share identical electrical specifications, temperature characteristics, and compliance certifications. The YAGEO substitute offers higher inventory availability (9,123 pieces) compared to the Samsung original (731 pieces). Physical seated height is 0.024" (0.60mm) versus 0.026" (0.65mm) for the Samsung part, representing a 0.05mm reduction that remains within standard PCB assembly tolerances. This part is suitable for direct replacement in applications requiring standard industrial-grade thick film resistors.

CRCW08055M62FKEA (Vishay Dale): This part meets all mandatory electrical and environmental specifications of the RC2012F5624CS while adding Automotive AEC-Q200 qualification. The CRCW series is designed for automotive and high-reliability applications where enhanced quality assurance and failure rate documentation are required. Physical seated height is 0.020" (0.50mm), the lowest among the three options. This part is appropriate for designs requiring automotive-grade components or when enhanced reliability certifications are specified. Inventory availability is highest at 12,650 pieces.

Both substitute parts are Active status products with ROHS3 compliance and REACH Unaffected designation, matching the regulatory profile of the original component.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-075M62L replace RC2012F5624CS in existing designs without PCB modification?

A: Yes. Both parts share identical electrical specifications (5.62 MOhms ±1%, 0.125W, ±100ppm/°C, -55°C to 155°C operating range) and package footprint (0805/2012 Metric). The seated height difference of 0.002" (0.05mm) is within standard PCB assembly tolerances and does not require design changes.

Q: What is the difference between the YAGEO and Vishay Dale substitutes?

A: The primary difference is automotive qualification. CRCW08055M62FKEA carries AEC-Q200 certification for automotive applications, while RC0805FR-075M62L is a standard industrial-grade component. Both meet identical electrical specifications and RoHS compliance. Selection depends on application requirements: use YAGEO for general industrial applications, use Vishay Dale for automotive or high-reliability designs.

Q: Are all three parts interchangeable on the same PCB?

A: Yes, all three parts are mechanically and electrically interchangeable. The 0805 (2012 Metric) package footprint is identical across all three manufacturers. Seated height variations (0.020" to 0.026") do not affect PCB assembly compatibility.

Q: What does Moisture Sensitivity Level 1 mean?

A: MSL 1 indicates unlimited shelf life without moisture baking requirements. All three parts have MSL 1 rating, meaning they can be stored and handled without special moisture control procedures.

Q: Which part should be selected for new designs?

A: Selection is based on application classification. For standard industrial applications, either RC0805FR-075M62L or RC2012F5624CS is appropriate. For automotive or high-reliability applications, CRCW08055M62FKEA is required due to AEC-Q200 qualification. All three parts are Active status products suitable for new designs.

Q: Do these parts require different soldering profiles?

A: No. All three parts are thick film 0805 package resistors with identical thermal characteristics and operating temperature ranges (-55°C to 155°C). Standard SMD soldering profiles for 0805 components apply to all three parts.