RC2012F5620CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F5620CS is a 562 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.125W (1/8W) in 0805 (2012 Metric) package format. This component is classified as Active product status with moisture-resistant construction and operates across the temperature range of -55°C to 155°C. Equivalent and substitute parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or application-specific certifications such as automotive AEC-Q200 qualification.

Substiute Parts

RC2012F5620CS

Samsung Electro-MechanicsIn Stock: 1029RC2012F5620CS Datasheet

Current PartRFQ

CR0805-FX-5620ELF

Bourns Inc.In Stock: 22645CR0805-FX-5620ELF Datasheet

DirectRFQ

ERJ-6ENF5620V

Panasonic Electronic ComponentsIn Stock: 39135ERJ-6ENF5620V Datasheet

DirectRFQ

RC0805FR-07562RL

YAGEOIn Stock: 71734RC0805FR-07562RL Datasheet

DirectRFQ

RMCF0805FG562R

Stackpole Electronics IncIn Stock: 12216RMCF0805FG562R Datasheet

DirectRFQ

RMCF0805FT562R

Stackpole Electronics IncIn Stock: 76898RMCF0805FT562R Datasheet

DirectRFQ

CRCW0805562RFKEA

Vishay DaleIn Stock: 26772CRCW0805562RFKEA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC2012F5620CS is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 562 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package / Case: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• Termination count: 2
• RoHS compliance: ROHS3 Compliant
• MSL rating: 1 (Unlimited)

All identified substitute parts meet these mandatory parameters. Substitute parts are further categorized by feature set: moisture-resistant construction (standard industrial applications) or automotive AEC-Q200 qualification (automotive and high-reliability applications). Physical dimensions including height-seated measurements vary within acceptable tolerances across manufacturers but do not affect electrical performance or PCB assembly compatibility within the 0805 package specification.

Parameter Comparison

Engineering Selection Recommendations

For Standard Industrial Applications (Moisture-Resistant): CR0805-FX-5620ELF (Bourns Inc.) and RC0805FR-07562RL (YAGEO) are direct substitutes with moisture-resistant construction matching the RC2012F5620CS specification. Both maintain identical electrical parameters and ROHS3 compliance. Selection between these options is based on packaging format preference (Tape & Reel versus Cut Tape & Digi-Reel) and inventory availability.

For Automotive and High-Reliability Applications (AEC-Q200): ERJ-6ENF5620V (Panasonic Electronic Components), RMCF0805FG562R (Stackpole Electronics Inc - Cut Tape), RMCF0805FT562R (Stackpole Electronics Inc - Tape & Reel), and CRCW0805562RFKEA (Vishay Dale) are qualified substitutes with automotive AEC-Q200 certification. These components meet all electrical and thermal specifications of the RC2012F5620CS while providing additional automotive-grade reliability qualification. Selection is determined by packaging format and supply chain requirements.

All substitute parts maintain Active product status and ROHS3 compliance. Physical height variations (0.50mm to 0.70mm) remain within acceptable PCB assembly tolerances for 0805 package specifications and do not affect circuit performance or board layout compatibility.

Frequently Asked Questions (FAQ)

Q: Can CR0805-FX-5620ELF replace RC2012F5620CS in any application? A: CR0805-FX-5620ELF is a direct electrical and mechanical substitute for RC2012F5620CS. Both components share identical resistance (562 Ω), tolerance (±1%), power rating (0.125W), package format (0805), temperature coefficient (±100ppm/°C), operating temperature range (-55°C to 155°C), and moisture-resistant construction. Substitution is valid for standard industrial applications.

Q: What is the difference between moisture-resistant and AEC-Q200 qualified resistors? A: Moisture-resistant resistors (RC2012F5620CS, CR0805-FX-5620ELF, RC0805FR-07562RL) are designed for general industrial environments with protection against moisture ingress. AEC-Q200 qualified resistors (ERJ-6ENF5620V, RMCF0805FG562R, RMCF0805FT562R, CRCW0805562RFKEA) meet automotive industry reliability standards and are suitable for automotive, aerospace, and high-reliability applications. Both types meet identical electrical specifications for this 562 Ohm 1% 0805 resistor.

Q: Does the height difference between substitute parts affect PCB assembly? A: Height variations among substitute parts range from 0.50mm to 0.70mm maximum seated height. These variations remain within the 0805 (2012 Metric) package specification tolerance and do not affect PCB assembly compatibility, solder reflow profiles, or circuit performance. Component placement and soldering processes are unaffected by these dimensional differences.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All identified substitute parts including RC2012F5620CS, CR0805-FX-5620ELF, ERJ-6ENF5620V, RC0805FR-07562RL, RMCF0805FG562R, RMCF0805FT562R, and CRCW0805562RFKEA are ROHS3 compliant and carry MSL rating of 1 (Unlimited moisture sensitivity level).

Q: What packaging formats are available for these substitutes? A: Substitute parts are available in two packaging formats: Tape & Reel (TR) for automated assembly processes and Cut Tape (CT) or Cut Tape & Digi-Reel for manual or mixed assembly operations. Selection depends on production volume and assembly equipment compatibility.

Q: Can AEC-Q200 qualified resistors be used in non-automotive applications? A: Yes. AEC-Q200 qualified resistors exceed standard industrial specifications and are fully compatible with non-automotive applications. Using automotive-grade components in standard industrial circuits provides additional reliability margin without performance degradation or compatibility issues.