RC2012F561CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F561CS is a 560 Ohms ±1% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with moisture resistant characteristics and ROHS3 compliance. The part is supplied in Tape & Reel packaging with 904 units currently in stock.

Equivalent and substitute parts are necessary when the primary manufacturer part becomes unavailable, when supply chain optimization is required, or when design specifications allow for alternative qualified components that meet identical electrical and mechanical parameters.

Substiute Parts

RC2012F561CS

Samsung Electro-MechanicsIn Stock: 933RC2012F561CS Datasheet

Current PartRFQ

CR0805-FX-5600ELF

Bourns Inc.In Stock: 52644CR0805-FX-5600ELF Datasheet

DirectRFQ

CRG0805F560R

TE Connectivity Passive ProductIn Stock: 71751CRG0805F560R Datasheet

DirectRFQ

ERJ-6ENF5600V

Panasonic Electronic ComponentsIn Stock: 239984ERJ-6ENF5600V Datasheet

DirectRFQ

KTR10EZPF5600

Rohm SemiconductorIn Stock: 10639KTR10EZPF5600 Datasheet

DirectRFQ

RC0805FR-07560RL

YAGEOIn Stock: 705173RC0805FR-07560RL Datasheet

DirectRFQ

RMCF0805FT560R

Stackpole Electronics IncIn Stock: 124102RMCF0805FT560R Datasheet

DirectRFQ

CRCW0805560RFKEA

Vishay DaleIn Stock: 14496CRCW0805560RFKEA Datasheet

SimilarRFQ

CRCW0805560RFKEAHP

Vishay DaleIn Stock: 40203CRCW0805560RFKEAHP Datasheet

SimilarRFQ

ERJ-UP6F5600V

Panasonic Electronic ComponentsIn Stock: 6121ERJ-UP6F5600V Datasheet

SimilarRFQ

RCS0805560RFKEA

Vishay DaleIn Stock: 22329RCS0805560RFKEA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC2012F561CS are classified into two categories based on electrical and mechanical compatibility:

Direct Equivalents (Identical Electrical & Mechanical Specifications): Parts that match all key parameters: 560 Ohms resistance, ±1% tolerance, 0.125W power rating, 0805 package, ±100ppm/°C temperature coefficient, -55°C to 155°C operating range, and ROHS3 compliance. These parts are interchangeable without circuit redesign.

Similar Parts (Different Power Rating or Enhanced Features): Parts that maintain identical resistance, tolerance, package, and temperature specifications but differ in power rating (0.5W instead of 0.125W) or include additional certifications such as Automotive AEC-Q200 or pulse withstanding capabilities. These parts are compatible for applications where higher power dissipation capability or automotive qualification is beneficial, though they may have different physical heights.

Key Parameters Determining Substitution:

• Resistance value: 560 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Temperature Coefficient: ±100ppm/°C (exact match required)
• Operating Temperature: -55°C ~ 155°C (exact match required)
• Composition: Thick Film (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)

Parameter Comparison

Engineering Selection Recommendations

For Direct Substitution (Identical Specifications):

The following parts are direct equivalents to RC2012F561CS and maintain all electrical and mechanical parameters:

• CR0805-FX-5600ELF (Bourns Inc.): Direct equivalent with moisture resistant composition. Highest inventory availability at 52,570 units. Slightly lower maximum height (0.60mm vs 0.65mm) provides improved PCB clearance.

• CRG0805F560R (TE Connectivity Passive Product): Direct equivalent with 71,696 units in stock. Maintains identical specifications with standard height profile.

• RC0805FR-07560RL (YAGEO): Direct equivalent with moisture resistant features. Largest inventory at 705,100 units. Available in Cut Tape and Digi-Reel packaging options. Lowest maximum height at 0.60mm.

For Applications Requiring Automotive Qualification (AEC-Q200):

• ERJ-6ENF5600V (Panasonic Electronic Components): Maintains all electrical specifications with Automotive AEC-Q200 certification. Highest inventory among qualified parts at 239,902 units. Suitable for automotive and industrial applications requiring qualification compliance.

• RMCF0805FT560R (Stackpole Electronics Inc): AEC-Q200 qualified alternative with 124,050 units available. Standard height profile matching original part.

• CRCW0805560RFKEA (Vishay Dale): AEC-Q200 qualified with lowest maximum height at 0.50mm. Inventory of 14,448 units.

For Applications Requiring Enhanced Power Dissipation or Pulse Withstanding:

• CRCW0805560RFKEAHP (Vishay Dale): 0.5W power rating with pulse withstanding capability and AEC-Q200 certification. Use only when circuit design permits higher power rating.

• ERJ-UP6F5600V (Panasonic Electronic Components): 0.5W rating with anti-sulfur, AEC-Q200, and pulse withstanding features. Suitable for harsh environments and automotive applications.

• RCS0805560RFKEA (Vishay Dale): 0.5W rated alternative with AEC-Q200 and pulse withstanding. Lowest maximum height at 0.50mm.

All substitute parts maintain ROHS3 compliance, MSL Level 1 (Unlimited), and identical operating temperature range (-55°C to 155°C).

Frequently Asked Questions (FAQ)

Q: Can I use a 0.5W rated resistor (such as CRCW0805560RFKEAHP) as a direct replacement for the 0.125W RC2012F561CS?

A: Yes, from an electrical and mechanical standpoint. The 0.5W parts maintain identical resistance, tolerance, package, and temperature specifications. However, verify that your circuit design does not depend on the specific power dissipation characteristics or thermal behavior of the 0.125W rating. The 0.5W variants have lower maximum heights (0.50mm vs 0.65mm), which may affect PCB layout clearances.

Q: What is the difference between "Direct" and "Similar" substitute classifications?

A: Direct substitutes (CR0805-FX-5600ELF, CRG0805F560R, ERJ-6ENF5600V, KTR10EZPF5600, RC0805FR-07560RL, RMCF0805FT560R, CRCW0805560RFKEA) match all electrical and mechanical parameters including 0.125W power rating. Similar parts (CRCW0805560RFKEAHP, ERJ-UP6F5600V, RCS0805560RFKEA) differ in power rating (0.5W) or include additional features such as pulse withstanding or anti-sulfur properties.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance status identical to the RC2012F561CS.

Q: What does Automotive AEC-Q200 certification mean?

A: AEC-Q200 is an automotive industry qualification standard for passive components. Parts bearing this certification (ERJ-6ENF5600V, KTR10EZPF5600, RMCF0805FT560R, CRCW0805560RFKEA, CRCW0805560RFKEAHP, ERJ-UP6F5600V, RCS0805560RFKEA) have undergone additional reliability testing and are approved for automotive applications. Use AEC-Q200 qualified parts when your application requires automotive-grade components.

Q: Does the maximum height difference between parts affect PCB assembly?

A: Yes. Maximum seated heights range from 0.50mm to 0.70mm. Parts with lower heights (0.50mm: CRCW0805560RFKEA, CRCW0805560RFKEAHP, RCS0805560RFKEA) provide improved clearance for low-profile designs. Parts with higher heights (0.70mm: ERJ-6ENF5600V, ERJ-UP6F5600V) may require additional PCB clearance verification. Verify your PCB design constraints before selecting a substitute.

Q: Which substitute offers the best inventory availability?

A: RC0805FR-07560RL (YAGEO) offers the largest inventory at 705,100 units. For AEC-Q200 qualified alternatives, ERJ-6ENF5600V (Panasonic) provides the highest availability at 239,902 units.

Q: Can I mix different manufacturers' parts in the same circuit?

A: Yes. All listed parts maintain identical electrical specifications (560 Ohms ±1%, ±100ppm/°C, -55°C to 155°C). Mixing manufacturers is acceptable from an electrical standpoint. However, verify that your procurement and quality assurance processes accommodate multiple suppliers.

Q: What packaging options are available?

A: Most parts are supplied in Tape & Reel (TR) packaging. KTR10EZPF5600 (Rohm) is available in Cut Tape (CT). RC0805FR-07560RL (YAGEO) offers both Cut Tape and Digi-Reel options. Verify packaging requirements with your assembly process.