RC2012F560CS 56 Ohm 1% 1/8W 0805 SMD Chip Resistor Equivalent & Substitute Parts

Part Overview

The RC2012F560CS is a thick film SMD chip resistor manufactured by Samsung Electro-Mechanics, rated at 56 Ohms with ±1% tolerance and 0.125W (1/8W) power dissipation in 0805 (2012 Metric) package format. This component is classified as Active product status with moisture resistant characteristics and ROHS3 compliance. Equivalent and substitute parts are identified when electrical specifications, mechanical dimensions, and environmental ratings align within acceptable tolerances for direct circuit board replacement without design modification.

Key Parameters

Parameter	Value	Unit
Resistance	56	Ohms
Tolerance	±1%	-
Power Rating	0.125	W (1/8W)
Package / Case	0805 (2012 Metric)	-
Composition	Thick Film	-
Temperature Coefficient	±100	ppm/°C
Operating Temperature Range	-55 to 155	°C
Moisture Sensitivity Level	1 (Unlimited)	-
RoHS Status	ROHS3 Compliant	-
Size / Dimension	0.079" L x 0.049" W (2.00mm x 1.25mm)	-

Substitute Part Grouping Explanation

Substitution eligibility for the RC2012F560CS is determined by strict alignment of the following parameters:

Primary Substitution Criteria (Must Match Exactly):

Resistance value: 56 Ohms
Tolerance: ±1%
Power rating: 0.125W (1/8W)
Package: 0805 (2012 Metric)
Composition: Thick Film
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C to 155°C
Moisture Sensitivity Level: 1 (Unlimited)
RoHS Status: ROHS3 Compliant

Direct Substitutes meet all primary criteria with identical electrical and mechanical specifications. These parts are interchangeable without circuit design changes.

Similar Parts share the same resistance, tolerance, package, and operating temperature but differ in one or more secondary characteristics such as power rating, automotive certification (AEC-Q200), or additional features (pulse withstanding, anti-sulfur). These require design review before substitution.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance (Ohms)	Tolerance	Power (W)	Package	Temp Coeff (ppm/°C)	Op Temp (°C)	Features	AEC-Q200	Height Max (mm)	Inventory (Pcs)
RC2012F560CS	Samsung Electro-Mechanics	56	±1%	0.125	0805	±100	-55 to 155	Moisture Resistant	No	0.65	830
CR0805-FX-56R0ELF	Bourns Inc.	56	±1%	0.125	0805	±100	-55 to 155	Moisture Resistant	No	0.60	20503
ERJ-6ENF56R0V	Panasonic Electronic Components	56	±1%	0.125	0805	±100	-55 to 155	Automotive AEC-Q200	Yes	0.70	132406
KTR10EZPF56R0	Rohm Semiconductor	56	±1%	0.125	0805	±100	-55 to 155	Automotive AEC-Q200, High Voltage	Yes	0.65	1972
RC0805FR-0756RL	YAGEO	56	±1%	0.125	0805	±100	-55 to 155	Moisture Resistant	No	0.60	3120
RMCF0805FT56R0	Stackpole Electronics Inc	56	±1%	0.125	0805	±100	-55 to 155	Automotive AEC-Q200	Yes	0.65	12079
AC0805FR-0756RL	YAGEO	56	±1%	0.125	0805	±100	-55 to 155	Automotive AEC-Q200, Moisture Resistant	Yes	0.60	9281
CRCW080556R0FKEA	Vishay Dale	56	±1%	0.125	0805	±100	-55 to 155	Automotive AEC-Q200	Yes	0.50	27100
CRCW080556R0FKEAHP	Vishay Dale	56	±1%	0.5	0805	±100	-55 to 155	Automotive AEC-Q200, Pulse Withstanding	Yes	0.50	23315
ERJ-P06D56R0V	Panasonic Electronic Components	56	±0.5%	0.5	0805	±100	-55 to 155	Automotive AEC-Q200, Pulse Withstanding	Yes	0.70	39881
ERJ-UP6F56R0V	Panasonic Electronic Components	56	±1%	0.5	0805	±100	-55 to 155	Anti-Sulfur, Automotive AEC-Q200, Pulse Withstanding	Yes	0.70	5934

Engineering Selection Recommendations

Direct Substitutes (Identical Electrical and Mechanical Specifications):

The following parts are direct substitutes for RC2012F560CS and require no design modification:

CR0805-FX-56R0ELF (Bourns Inc.): Matches all primary specifications. Moisture resistant thick film composition. High inventory availability (20,503 pcs).
RC0805FR-0756RL (YAGEO): Matches all primary specifications. Moisture resistant thick film composition. Available in Cut Tape and Digi-Reel packaging.

Substitutes with Enhanced Specifications (Automotive Grade):

The following parts meet or exceed all primary specifications and add automotive AEC-Q200 certification:

ERJ-6ENF56R0V (Panasonic Electronic Components): Identical electrical specifications with AEC-Q200 automotive qualification. Highest inventory availability (132,406 pcs).
RMCF0805FT56R0 (Stackpole Electronics Inc): Identical electrical specifications with AEC-Q200 automotive qualification. Moderate inventory (12,079 pcs).
AC0805FR-0756RL (YAGEO): Identical electrical specifications with AEC-Q200 automotive qualification and moisture resistant features. Inventory: 9,281 pcs.
CRCW080556R0FKEA (Vishay Dale): Identical electrical specifications with AEC-Q200 automotive qualification. Lowest seated height (0.50mm). Highest inventory among automotive-grade direct substitutes (27,100 pcs).
KTR10EZPF56R0 (Rohm Semiconductor): Identical electrical specifications with AEC-Q200 automotive qualification and high voltage capability. Limited inventory (1,972 pcs).

Similar Parts (Different Power Rating or Tolerance):

The following parts share the same resistance, package, and operating temperature but differ in power rating or tolerance:

CRCW080556R0FKEAHP (Vishay Dale): 0.5W power rating (vs. 0.125W), AEC-Q200 automotive qualification, pulse withstanding capability. Suitable only if circuit design permits higher power dissipation.
ERJ-P06D56R0V (Panasonic Electronic Components): 0.5W power rating with ±0.5% tolerance (tighter than ±1%), AEC-Q200 automotive qualification, pulse withstanding capability. Suitable only if circuit design permits higher power dissipation and benefits from improved tolerance.
ERJ-UP6F56R0V (Panasonic Electronic Components): 0.5W power rating with ±1% tolerance, anti-sulfur feature, AEC-Q200 automotive qualification, pulse withstanding capability. Suitable only if circuit design permits higher power dissipation and requires anti-sulfur protection.

All substitute parts maintain ROHS3 compliance, MSL Level 1 (Unlimited), and identical operating temperature range (-55°C to 155°C).

Frequently Asked Questions (FAQ)

Q: Can I substitute RC2012F560CS with CR0805-FX-56R0ELF?

A: Yes. CR0805-FX-56R0ELF is a direct substitute. Both parts share identical resistance (56 Ohms), tolerance (±1%), power rating (0.125W), package (0805), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C to 155°C). Both are moisture resistant thick film resistors with ROHS3 compliance and MSL Level 1.

Q: What is the difference between direct substitutes and similar parts?

A: Direct substitutes match all electrical and mechanical specifications of the RC2012F560CS without modification. Similar parts differ in one or more parameters such as power rating (0.5W vs. 0.125W), tolerance (±0.5% vs. ±1%), or additional features (automotive AEC-Q200, pulse withstanding, anti-sulfur). Similar parts require design review to confirm circuit compatibility before substitution.

Q: Can I use a 0.5W rated resistor in place of the 0.125W RC2012F560CS?

A: A 0.5W resistor is physically compatible in the 0805 package footprint. However, substitution requires design verification. The higher power rating does not automatically make it suitable; circuit design must confirm that the application does not depend on the specific thermal characteristics or power dissipation profile of the 0.125W component. Consult circuit design documentation before substitution.

Q: Why do some substitutes have AEC-Q200 certification while the RC2012F560CS does not?

A: AEC-Q200 is an automotive industry qualification standard. The RC2012F560CS is not automotive-qualified, while alternatives such as ERJ-6ENF56R0V, RMCF0805FT56R0, and CRCW080556R0FKEA carry this certification. AEC-Q200 parts are suitable for automotive applications and general industrial use. Non-automotive parts are suitable for consumer and industrial applications where automotive qualification is not required.

Q: What does MSL Level 1 (Unlimited) mean?

A: MSL (Moisture Sensitivity Level) Level 1 indicates unlimited shelf life without moisture control requirements. All listed parts, including RC2012F560CS, have MSL Level 1 and do not require special dry storage or baking procedures before soldering.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All direct and similar substitute parts listed are ROHS3 compliant, matching the RC2012F560CS compliance status. All parts are suitable for applications requiring ROHS3 certification.

Q: What is the significance of seated height differences among substitutes?

A: Seated height (maximum) ranges from 0.50mm to 0.70mm across the listed parts. For most applications, these minor variations are not significant. However, in space-constrained designs with tight vertical clearance requirements, the lowest-profile option (CRCW080556R0FKEA at 0.50mm) may be preferred. Verify PCB design clearance specifications before selecting based on height.

Q: Can I substitute RC2012F560CS with ERJ-P06D56R0V?

A: ERJ-P06D56R0V is a similar part, not a direct substitute. It differs in power rating (0.5W vs. 0.125W) and tolerance (±0.5% vs. ±1%). Substitution requires design verification to confirm that the circuit can accommodate the higher power rating and benefits from the tighter tolerance. Do not substitute without design review.

Q: Which substitute has the highest inventory availability?

A: ERJ-6ENF56R0V (Panasonic Electronic Components) has the highest inventory at 132,406 pcs. This part is a direct substitute with AEC-Q200 automotive qualification and is suitable for immediate procurement in high-volume applications.

Q: What packaging options are available for substitutes?

A: Most substitutes are supplied in Tape & Reel (TR) format. RC0805FR-0756RL is available in Cut Tape (CT) and Digi-Reel format. Verify packaging requirements with procurement specifications before ordering.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message