RC2012F4321CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F4321CS is a 4.32 kOhms ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is rated for 0.125W (1/8W) power dissipation and operates across the temperature range of -55°C to 155°C. The part is currently in active production status with 975 units available in stock. Substitute parts are necessary when primary inventory is depleted, when specific certifications are required for application-specific standards, or when alternative packaging formats better suit manufacturing requirements.

Key Parameters

Parameter	Value	Criticality for Substitution
Resistance Value	4.32 kOhms	Critical - Must Match Exactly
Tolerance	±1%	Critical - Must Match Exactly
Power Rating	0.125W (1/8W)	Critical - Must Match or Exceed
Package / Case	0805 (2012 Metric)	Critical - Must Match for PCB Compatibility
Composition	Thick Film	Critical - Determines Performance Characteristics
Temperature Coefficient	±100ppm/°C	Critical - Affects Stability Over Temperature Range
Operating Temperature Range	-55°C to 155°C	Critical - Must Support Application Environment
RoHS Status	ROHS3 Compliant	Important - Regulatory Requirement
Moisture Sensitivity Level	MSL 1 (Unlimited)	Important - Affects Storage and Handling

Substitute Part Grouping Explanation

Substitution eligibility for the RC2012F4321CS is determined by strict equivalence across all critical electrical and mechanical parameters. All substitute parts must meet the following criteria:

Mandatory Matching Parameters:

Resistance: 4.32 kOhms (exact value)
Tolerance: ±1% (exact tolerance)
Power Rating: 0.125W minimum (1/8W)
Package: 0805 (2012 Metric) form factor
Composition: Thick Film construction
Temperature Coefficient: ±100ppm/°C
Operating Temperature: -55°C to 155°C minimum range
RoHS3 Compliance
MSL Rating: 1 (Unlimited)

Secondary Considerations:

Product Status: Active or recently active
Packaging Format: Tape & Reel (TR) preferred for automated assembly; Cut Tape (CT) acceptable for manual placement
Physical Dimensions: Height variation within 0.020" to 0.028" seated maximum is acceptable
Manufacturer Certifications: AEC-Q200 automotive qualification available on select alternatives

All identified substitute parts satisfy these mandatory criteria and are therefore electrically and mechanically interchangeable with the RC2012F4321CS.

Parameter Comparison

Manufacturer	Part Number	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	Height Max (in)	Features	Status	Inventory
Samsung Electro-Mechanics	RC2012F4321CS	4.32 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.026	Moisture Resistant	Active	975
Bourns Inc.	CR0805-FX-4321ELF	4.32 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.024	Moisture Resistant	Active	12789
Panasonic Electronic Components	ERJ-6ENF4321V	4.32 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.028	Automotive AEC-Q200	Active	119708
Rohm Semiconductor	KTR10EZPF4321	4.32 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.026	Automotive AEC-Q200, High Voltage	Active	10447
YAGEO	RC0805FR-074K32L	4.32 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.024	Moisture Resistant	Active	3100
Stackpole Electronics Inc	RMCF0805FT4K32	4.32 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.026	Automotive AEC-Q200	Active	70044
Vishay Dale	CRCW08054K32FKEA	4.32 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.020	Automotive AEC-Q200	Active	36747
Rohm Semiconductor	MCR10ERTF4321	4.32 kΩ	±1%	0.125	0805	±100ppm/°C	-55 to 155°C	0.026	Standard Thick Film	Discontinued	1284

Engineering Selection Recommendations

For General Industrial Applications: Select CR0805-FX-4321ELF (Bourns Inc.) or RC0805FR-074K32L (YAGEO) when moisture resistance is the primary requirement and automotive certification is not mandated. Both parts maintain active production status with adequate inventory levels.

For Automotive Applications: Select RMCF0805FT4K32 (Stackpole Electronics Inc.), ERJ-6ENF4321V (Panasonic Electronic Components), or CRCW08054K32FKEA (Vishay Dale) when AEC-Q200 automotive qualification is required. RMCF0805FT4K32 offers the highest inventory availability (70,044 units) among automotive-qualified alternatives.

For High-Voltage Applications: Select KTR10EZPF4321 (Rohm Semiconductor) when high-voltage performance characteristics are specified in the design requirements. This part combines AEC-Q200 certification with high-voltage capability.

Inventory Considerations: ERJ-6ENF4321V (Panasonic) provides the largest available inventory (119,708 units), making it the optimal choice for high-volume production runs or when supply chain continuity is critical.

Discontinued Part Status: MCR10ERTF4321 (Rohm Semiconductor) is discontinued at DiGi Electronics. While 1,284 units remain in stock, this part should not be selected for new designs or long-term production commitments.

Frequently Asked Questions (FAQ)

Q: Can I substitute the RC2012F4321CS with any of the listed alternatives without circuit redesign?

A: Yes. All listed substitute parts are electrically and mechanically equivalent. They share identical resistance values (4.32 kOhms), tolerance (±1%), power rating (0.125W), package format (0805), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C to 155°C). Direct substitution on the PCB is possible without circuit modification.

Q: What is the difference between "Direct" and "Similar" substitute classifications?

A: Direct substitutes are fully equivalent across all critical parameters and can be used interchangeably in any application. Similar substitutes also meet all electrical and mechanical requirements but may have minor variations in secondary characteristics such as packaging format (Cut Tape vs. Tape & Reel) or specific feature sets. MCR10ERTF4321 is classified as similar due to its discontinued status, though it remains electrically compatible.

Q: Does the height variation between substitute parts affect PCB assembly?

A: Height variations range from 0.020" (CRCW08054K32FKEA) to 0.028" (ERJ-6ENF4321V), a difference of 0.008". This variation is within standard PCB assembly tolerances and does not affect reflow soldering, wave soldering, or component placement. All parts are compatible with standard 0805 footprints.

Q: Which substitute part should I select for automotive applications?

A: Three alternatives carry AEC-Q200 automotive qualification: RMCF0805FT4K32 (Stackpole), ERJ-6ENF4321V (Panasonic), and CRCW08054K32FKEA (Vishay Dale). Selection depends on inventory availability and specific design requirements. RMCF0805FT4K32 offers the highest stock level.

Q: Is moisture resistance available on all substitute parts?

A: Moisture resistance is explicitly specified on CR0805-FX-4321ELF (Bourns), RC0805FR-074K32L (YAGEO), and the original RC2012F4321CS (Samsung). Automotive-qualified alternatives (Panasonic, Rohm KTR series, Stackpole, Vishay) do not explicitly list moisture resistance as a feature, though they maintain MSL 1 (Unlimited) rating. For applications requiring explicit moisture resistance specification, select Bourns or YAGEO alternatives.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel (TR) packaging is optimized for automated pick-and-place assembly and is the standard format for high-volume production. Cut Tape (CT) is supplied in individual tape segments and is suitable for manual placement or lower-volume assembly. MCR10ERTF4321 is available in Cut Tape & Digi-Reel format. For automated manufacturing, specify Tape & Reel alternatives.

Q: Can I use KTR10EZPF4321 in non-high-voltage applications?

A: Yes. KTR10EZPF4321 is rated for high-voltage performance but is fully compatible with standard voltage applications. Its high-voltage capability does not restrict use in lower-voltage circuits. Selection of this part is optional and depends on whether high-voltage performance is a design requirement.

Q: What does RoHS3 Compliance mean for this component?

A: RoHS3 Compliance indicates the part meets Restriction of Hazardous Substances Directive requirements, restricting lead, cadmium, mercury, and other hazardous materials. All listed substitute parts carry RoHS3 Compliance certification, making them suitable for applications subject to environmental and regulatory restrictions.

Q: Is the temperature coefficient specification critical for my application?

A: The temperature coefficient (±100ppm/°C) determines how the resistance value changes with temperature. All substitute parts share this specification with the original RC2012F4321CS. If your circuit requires tighter temperature stability, verify that ±100ppm/°C meets your design tolerance budget across the -55°C to 155°C operating range.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message