RC2012F334CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F334CS is a 330 kOhms ±1% 0.125W (1/8W) thick film chip resistor in 0805 (2012 Metric) surface mount package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with moisture resistant characteristics and ROHS3 compliance. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings are maintained across alternative manufacturers while preserving functional performance in target applications.

Key Parameters

Parameter	Value
Resistance	330 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Terminations	2

Substitute Part Grouping Explanation

Substitute parts for the RC2012F334CS are classified into two categories based on electrical and mechanical compatibility:

Direct Substitutes maintain identical specifications across all critical parameters: 330 kOhms resistance, ±1% tolerance, 0.125W power rating, 0805 package, ±100ppm/°C temperature coefficient, -55°C to 155°C operating range, and ROHS3 compliance. These parts are interchangeable in applications where the original Samsung component is specified.

Similar Substitutes share the same resistance, tolerance, package, and temperature range but differ in power rating (0.5W instead of 0.125W) or include additional features such as automotive AEC-Q200 certification, anti-sulfur treatment, or pulse withstanding capability. These parts are suitable for applications requiring enhanced performance margins or specific environmental qualifications.

The substitution logic is strictly based on the following allowed parameters:

Resistance value (330 kOhms)
Tolerance (±1%)
Package type (0805 / 2012 Metric)
Temperature coefficient (±100ppm/°C)
Operating temperature range (-55°C ~ 155°C)
Composition (Thick Film)
RoHS compliance status
Moisture Sensitivity Level (MSL 1)

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff	Op Temp Range	Features	RoHS	MSL
RC2012F334CS	Samsung Electro-Mechanics	330 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Moisture Resistant	ROHS3	1
CR0805-FX-3303ELF	Bourns Inc.	330 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Moisture Resistant	ROHS3	1
CRG0805F330K	TE Connectivity Passive Product	330 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	—	ROHS3	1
ERJ-6ENF3303V	Panasonic Electronic Components	330 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Automotive AEC-Q200	ROHS3	1
KTR10EZPF3303	Rohm Semiconductor	330 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Automotive AEC-Q200, High Voltage	ROHS3	1
RC0805FR-07330KL	YAGEO	330 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Moisture Resistant	ROHS3	1
RMCF0805FT330K	Stackpole Electronics Inc	330 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Automotive AEC-Q200	ROHS3	1
AC0805FR-07330KL	YAGEO	330 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Automotive AEC-Q200, Moisture Resistant	ROHS3	1
CRCW0805330KFKEA	Vishay Dale	330 kΩ	±1%	0.125	0805	±100ppm/°C	-55~155°C	Automotive AEC-Q200	ROHS3	1
CRCW0805330KFKEAHP	Vishay Dale	330 kΩ	±1%	0.5	0805	±100ppm/°C	-55~155°C	Automotive AEC-Q200, Pulse Withstanding	ROHS3	1
ERJ-UP6F3303V	Panasonic Electronic Components	330 kΩ	±1%	0.5	0805	±100ppm/°C	-55~155°C	Anti-Sulfur, Automotive AEC-Q200, Pulse Withstanding	ROHS3	1

Engineering Selection Recommendations

Direct Substitutes (Identical Specifications):

The following parts are direct functional equivalents with matching 0.125W power rating and identical electrical characteristics:

CR0805-FX-3303ELF (Bourns Inc.) — Moisture resistant thick film composition, suitable for general industrial applications
CRG0805F330K (TE Connectivity Passive Product) — Neohm series, standard industrial-grade thick film resistor
ERJ-6ENF3303V (Panasonic Electronic Components) — Automotive AEC-Q200 qualified, suitable for automotive and industrial environments
KTR10EZPF3303 (Rohm Semiconductor) — Automotive AEC-Q200 qualified with high voltage capability
RC0805FR-07330KL (YAGEO) — Moisture resistant thick film, industrial-grade component
RMCF0805FT330K (Stackpole Electronics Inc) — Automotive AEC-Q200 qualified
AC0805FR-07330KL (YAGEO) — Automotive AEC-Q200 qualified with moisture resistant features
CRCW0805330KFKEA (Vishay Dale) — Automotive AEC-Q200 qualified, compact 0.020" height

Similar Substitutes (Enhanced Power Rating):

The following parts provide higher power dissipation capability (0.5W) while maintaining all other electrical parameters:

CRCW0805330KFKEAHP (Vishay Dale) — 0.5W power rating with pulse withstanding capability, automotive AEC-Q200 qualified
ERJ-UP6F3303V (Panasonic Electronic Components) — 0.5W power rating with anti-sulfur treatment and pulse withstanding capability, automotive AEC-Q200 qualified

Selection of similar substitutes with higher power ratings is appropriate when circuit design margins require increased thermal headroom or when applications involve transient pulse conditions.

Frequently Asked Questions (FAQ)

Q: Can I use a 0.5W rated resistor as a substitute for the 0.125W RC2012F334CS?

A: Yes. The 0.5W rated parts (CRCW0805330KFKEAHP and ERJ-UP6F3303V) are mechanically and electrically compatible with the 0.125W specification. Higher power rating provides additional thermal margin and does not degrade performance in applications designed for 0.125W dissipation. All other parameters including resistance, tolerance, package, and temperature range remain identical.

Q: What is the difference between direct substitutes and similar substitutes?

A: Direct substitutes maintain identical power ratings (0.125W) and all electrical specifications. Similar substitutes differ primarily in power rating (0.5W) or include additional features such as automotive AEC-Q200 certification, anti-sulfur treatment, or pulse withstanding capability. Both categories are mechanically compatible with the 0805 package footprint.

Q: Are automotive AEC-Q200 qualified parts suitable for non-automotive applications?

A: Yes. Automotive AEC-Q200 qualification indicates enhanced reliability testing and quality standards. These parts are fully compatible with general industrial, consumer, and commercial applications and provide equivalent or superior performance compared to non-qualified alternatives.

Q: What does Moisture Sensitivity Level (MSL) 1 mean?

A: MSL 1 indicates unlimited moisture sensitivity, meaning the component has no moisture-related storage or handling restrictions. All listed substitute parts carry MSL 1 rating, ensuring compatibility with standard warehouse and assembly processes.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed carry ROHS3 compliance certification, matching the environmental compliance status of the original RC2012F334CS component.

Q: What is the significance of the ±100ppm/°C temperature coefficient?

A: The ±100ppm/°C temperature coefficient defines the maximum resistance change per degree Celsius across the operating temperature range. All listed parts maintain this specification, ensuring predictable performance across -55°C to 155°C operating conditions.

Q: Can I substitute parts with different packaging formats?

A: No. All substitute parts maintain the 0805 (2012 Metric) package specification. Substitution with different package sizes (such as 0603 or 1206) requires PCB layout redesign and is outside the scope of direct component substitution.

Q: What is the physical height difference between substitute parts?

A: Seated height varies between 0.020" (0.50mm) and 0.028" (0.70mm) across the listed parts. These variations are within typical PCB assembly tolerances and do not affect functional performance or mechanical compatibility with standard 0805 footprints.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message