RC2012F2673CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F2673CS is a 267 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with moisture-resistant construction and ROHS3 compliance. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings align with the original component, enabling direct replacement in circuit designs without functional degradation.

Substiute Parts

RC2012F2673CS

Samsung Electro-MechanicsIn Stock: 769RC2012F2673CS Datasheet

Current PartRFQ

ERJ-6ENF2673V

Panasonic Electronic ComponentsIn Stock: 103892ERJ-6ENF2673V Datasheet

DirectRFQ

RC0805FR-07267KL

YAGEOIn Stock: 30165RC0805FR-07267KL Datasheet

DirectRFQ

RMCF0805FT267K

Stackpole Electronics IncIn Stock: 26518RMCF0805FT267K Datasheet

DirectRFQ

CRCW0805267KFKEA

Vishay DaleIn Stock: 14630CRCW0805267KFKEA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution validity for the RC2012F2673CS is determined by strict equivalence across the following parameters:

Electrical Specifications: Resistance value (267 kOhms), tolerance (±1%), and power rating (0.125W) must be identical. Temperature coefficient (±100ppm/°C) and operating temperature range (-55°C ~ 155°C) establish thermal performance boundaries.

Mechanical Compatibility: Package designation (0805 / 2012 Metric) and number of terminations (2) ensure PCB footprint compatibility. Physical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm) and height specifications confirm mounting compatibility.

Environmental & Compliance Requirements: ROHS3 compliance, Moisture Sensitivity Level 1, and REACH unaffected status establish regulatory equivalence. Composition (thick film) and packaging format (Tape & Reel) maintain supply chain compatibility.

All identified substitute parts meet these criteria without exception.

Parameter Comparison

Engineering Selection Recommendations

All identified substitute parts maintain full electrical and mechanical equivalence to the RC2012F2673CS. Selection among these alternatives is based on product availability, supply chain considerations, and application-specific certifications.

ERJ-6ENF2673V (Panasonic): Carries AEC-Q200 automotive qualification. Suitable for applications requiring automotive-grade component certification. Inventory availability: 103,864 pieces.

RC0805FR-07267KL (YAGEO): Maintains moisture-resistant construction identical to the original part. Lowest seated height specification (0.024" / 0.60mm) for space-constrained PCB layouts. Inventory availability: 30,129 pieces.

RMCF0805FT267K (Stackpole): Carries AEC-Q200 automotive qualification with seated height matching the original specification (0.026" / 0.65mm). Inventory availability: 26,468 pieces.

CRCW0805267KFKEA (Vishay Dale): Carries AEC-Q200 automotive qualification with lowest seated height specification (0.020" / 0.50mm). Inventory availability: 14,573 pieces.

All parts are Active product status with ROHS3 compliance and unlimited moisture sensitivity rating.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF2673V replace RC2012F2673CS in non-automotive applications?

A: Yes. ERJ-6ENF2673V meets all electrical and mechanical specifications of RC2012F2673CS. AEC-Q200 certification is an additional qualification that does not restrict use in non-automotive circuits.

Q: What is the significance of height differences among substitute parts?

A: Height specifications (0.020" to 0.028") reflect maximum seated height after soldering. All values remain within acceptable PCB assembly tolerances for 0805 package components. Selection based on height is necessary only when PCB clearance constraints exist.

Q: Are all substitute parts suitable for moisture-sensitive applications?

A: Yes. All parts carry Moisture Sensitivity Level 1 (Unlimited), indicating no moisture sensitivity restrictions during storage or handling.

Q: Does the automotive AEC-Q200 rating on some substitutes affect general-purpose circuit performance?

A: No. AEC-Q200 represents additional qualification testing and reliability screening. Electrical performance in general-purpose applications remains identical to non-automotive variants.

Q: Can substitute parts be mixed within a single PCB assembly?

A: Yes. All substitute parts are mechanically and electrically equivalent. Mixed sourcing does not affect circuit functionality or reliability.

Q: What packaging considerations apply to these substitute parts?

A: All parts are supplied in Tape & Reel (TR) format. Reel specifications and tape pitch are standardized for 0805 package components, ensuring compatibility with automated pick-and-place assembly equipment.