RC2012F2260CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F2260CS is a 226 Ohm ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status with RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). The part is supplied in Tape & Reel packaging with 919 pieces currently in stock. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and package compatibility to support component sourcing flexibility and supply chain continuity.

Substiute Parts

RC2012F2260CS

Samsung Electro-MechanicsIn Stock: 996RC2012F2260CS Datasheet

Current PartRFQ

RC0805FR-07226RL

YAGEOIn Stock: 31910RC0805FR-07226RL Datasheet

DirectRFQ

CRCW0805226RFKEA

Vishay DaleIn Stock: 18192CRCW0805226RFKEA Datasheet

SimilarRFQ

ERJ-6ENF2260V

Panasonic Electronic ComponentsIn Stock: 95101ERJ-6ENF2260V Datasheet

SimilarRFQ

RMCF0805FT226R

Stackpole Electronics IncIn Stock: 5573RMCF0805FT226R Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters: resistance value (226 Ohms), tolerance (±1%), power rating (0.125W), package format (0805 / 2012 Metric), temperature coefficient (±100ppm/°C), operating temperature range (-55°C ~ 155°C), composition (thick film), and compliance certifications (RoHS3, REACH Unaffected, EAR99).

All identified substitute parts match these core electrical and mechanical specifications. Substitute parts are grouped into two categories: Direct equivalents (matching all parameters including moisture resistance feature) and similar parts (matching all core parameters with additional automotive AEC-Q200 qualification). Physical dimensions remain consistent across all parts within allowable tolerances for the 0805 package class.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed maintain full electrical and mechanical compatibility with the RC2012F2260CS. Selection between equivalent options is based on availability, supply chain requirements, and application-specific certifications.

RC0805FR-07226RL (YAGEO) functions as a direct equivalent with matching moisture resistance feature and identical electrical specifications. This part is suitable for general industrial applications requiring standard thick film resistor performance.

CRCW0805226RFKEA (Vishay Dale), ERJ-6ENF2260V (Panasonic), and RMCF0805FT226R (Stackpole) are qualified to AEC-Q200 automotive standards. These parts are appropriate for automotive and mission-critical applications where enhanced reliability qualification is required. All three maintain identical core electrical parameters and operating temperature range.

Physical height variations across substitute parts (0.020" to 0.028" seated height) remain within acceptable tolerances for 0805 package class and do not affect PCB layout compatibility for standard 0805 footprints.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-07226RL replace RC2012F2260CS in any application?

A: Yes. RC0805FR-07226RL matches all core electrical specifications (226 Ohms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C) and package format (0805 / 2012 Metric). Both parts are RoHS3 compliant with MSL 1 rating. Physical dimensions and termination count are identical.

Q: What is the difference between the Samsung part and the automotive-qualified substitutes?

A: CRCW0805226RFKEA, ERJ-6ENF2260V, and RMCF0805FT226R carry AEC-Q200 automotive qualification, indicating enhanced reliability testing and qualification for automotive applications. The RC2012F2260CS does not specify automotive qualification. All other electrical and mechanical parameters are equivalent.

Q: Are there any height restrictions when substituting these parts?

A: Seated height varies from 0.020" (CRCW0805226RFKEA) to 0.028" (ERJ-6ENF2260V). Standard 0805 PCB footprints accommodate this range. Verify clearance requirements for specific applications with restricted vertical space.

Q: Do all substitute parts have the same moisture sensitivity level?

A: Yes. All parts listed carry MSL 1 (Unlimited) rating, indicating no moisture sensitivity restrictions for storage, handling, or reflow processing.

Q: Can these parts be used interchangeably in high-temperature applications?

A: Yes. All parts operate across the identical temperature range of -55°C ~ 155°C with matching temperature coefficient of ±100ppm/°C. No derating is required when substituting between listed parts for temperature performance.

Q: Are all substitute parts available in Tape & Reel packaging?

A: Yes. All substitute parts are supplied in Tape & Reel (TR) packaging format, matching the original RC2012F2260CS packaging specification.