RC2012F2153CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F2153CS is a 215 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with moisture resistant characteristics and ROHS3 compliance. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings align with the original component, enabling direct replacement in circuit designs without performance degradation.

Key Parameters

Parameter	Value
Resistance	215 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution eligibility for the RC2012F2153CS is determined by strict alignment of the following parameters:

Electrical Specifications: Resistance value (215 kOhms), tolerance (±1%), and power rating (0.125W) must be identical across all substitute parts.

Package Compatibility: All substitute parts must use the 0805 (2012 Metric) package with identical mechanical dimensions (0.079" L x 0.049" W / 2.00mm x 1.25mm).

Environmental Ratings: Operating temperature range (-55°C ~ 155°C) and temperature coefficient (±100ppm/°C) must match the original specification.

Compliance Standards: All substitute parts must maintain ROHS3 compliance and MSL 1 rating to ensure compatibility with standard manufacturing and storage conditions.

Composition: Thick film construction is required for all substitutes to maintain electrical performance characteristics.

Substitute parts are classified into two categories: Direct substitutes (identical feature sets) and Similar substitutes (equivalent electrical and mechanical parameters with alternative certifications or packaging options).

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Composition	Temp Coeff	Operating Temp	Height Max	Features	Product Status
RC2012F2153CS	Samsung Electro-Mechanics	215 kOhms	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.026" (0.65mm)	Moisture Resistant	Active
ERJ-6ENF2153V	Panasonic Electronic Components	215 kOhms	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.028" (0.70mm)	Automotive AEC-Q200	Active
RC0805FR-07215KL	YAGEO	215 kOhms	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.024" (0.60mm)	Moisture Resistant	Active
RMCF0805FT215K	Stackpole Electronics Inc	215 kOhms	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.026" (0.65mm)	Automotive AEC-Q200	Active
CRCW0805215KFKEA	Vishay Dale	215 kOhms	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.020" (0.50mm)	Automotive AEC-Q200	Active
MCR10ERTF2153	Rohm Semiconductor	215 kOhms	±1%	0.125	0805	Thick Film	±100ppm/°C	-55°C ~ 155°C	0.026" (0.65mm)	Standard	Discontinued at DiGi Electronics

Engineering Selection Recommendations

Direct Substitutes (Preferred for Standard Applications):

RC0805FR-07215KL (YAGEO) and RC2012F2153CS (Samsung Electro-Mechanics) share identical moisture resistant features and Active product status. Both components are suitable for applications requiring moisture resistance without automotive qualification. RC0805FR-07215KL offers the lowest seated height (0.024" / 0.60mm), which may provide advantages in space-constrained PCB layouts.

Direct Substitutes (Automotive Applications):

ERJ-6ENF2153V (Panasonic Electronic Components) and RMCF0805FT215K (Stackpole Electronics Inc) are qualified to AEC-Q200 automotive standards while maintaining identical electrical specifications. Both are Active products with full ROHS3 compliance. These components are appropriate for automotive-grade circuit designs requiring enhanced reliability documentation.

Similar Substitute (Automotive, Compact Profile):

CRCW0805215KFKEA (Vishay Dale) provides AEC-Q200 automotive qualification with the lowest seated height specification (0.020" / 0.50mm). This component is suitable for high-density automotive PCB applications where vertical clearance is critical.

Discontinued Component:

MCR10ERTF2153 (Rohm Semiconductor) is listed as Discontinued at DiGi Electronics. While electrical and mechanical specifications remain compatible, this component should not be selected for new designs or long-term production requirements.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6ENF2153V replace RC2012F2153CS in non-automotive applications?

A: Yes. ERJ-6ENF2153V meets all electrical and mechanical requirements for direct substitution. The AEC-Q200 automotive qualification is an additional feature that does not restrict use in standard applications. Electrical performance, tolerance, power rating, and package dimensions are identical.

Q: What is the significance of the seated height differences among substitute parts?

A: Seated height variations (0.020" to 0.028") reflect manufacturing tolerances and design differences between manufacturers. For most applications, these differences are negligible. However, in PCB designs with tight vertical clearance constraints or specific assembly requirements, the lowest-profile option (CRCW0805215KFKEA at 0.020") may be preferred.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard manufacturing processes and storage conditions.

Q: Why is MCR10ERTF2153 listed if it is discontinued?

A: MCR10ERTF2153 is included for reference purposes to document historical equivalency relationships. For new designs or production orders, this component should not be selected. Alternative active products (ERJ-6ENF2153V, RC0805FR-07215KL, RMCF0805FT215K, or CRCW0805215KFKEA) are recommended.

Q: What is the difference between "Direct" and "Similar" substitute classifications?

A: Direct substitutes share identical feature sets with the original component (moisture resistant or automotive qualified). Similar substitutes meet all electrical and mechanical requirements but may have different certifications or packaging formats. Both categories are electrically and mechanically compatible for circuit replacement.

Q: Can I use an AEC-Q200 qualified resistor in a non-automotive circuit?

A: Yes. AEC-Q200 qualification represents an additional quality and reliability standard. Components meeting automotive standards are fully compatible with standard industrial and consumer applications. No performance degradation occurs when using automotive-qualified components in non-automotive circuits.

Q: Are there any thermal performance differences between substitute parts?

A: All substitute parts share identical temperature coefficient (±100ppm/°C) and operating temperature range (-55°C ~ 155°C). Thermal performance is equivalent across all listed components.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message