RC2012F1R2CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F1R2CS is a 1.2 Ohms ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status and is designed for general-purpose SMD applications requiring moisture-resistant construction. Substitute parts are identified when original inventory becomes unavailable, when design requirements mandate automotive-grade qualification, or when enhanced power dissipation capability is needed within the same package footprint.

Substiute Parts

RC2012F1R2CS

Samsung Electro-MechanicsIn Stock: 932RC2012F1R2CS Datasheet

Current PartRFQ

ERJ-6BQF1R2V

Panasonic Electronic ComponentsIn Stock: 24500ERJ-6BQF1R2V Datasheet

UpgradeRFQ

ERJ-6RQF1R2V

Panasonic Electronic ComponentsIn Stock: 26601ERJ-6RQF1R2V Datasheet

UpgradeRFQ

RMCF0805FT1R20

Stackpole Electronics IncIn Stock: 39010RMCF0805FT1R20 Datasheet

UpgradeRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the RC2012F1R2CS is determined by strict alignment of the following critical parameters:

Mandatory Matching Parameters:

• Resistance value: 1.2 Ohms
• Tolerance: ±1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thick Film
• Operating Temperature Range: -55°C ~ 155°C minimum
• Moisture Sensitivity Level: 1 (Unlimited)
• RoHS Status: ROHS3 Compliant

Allowable Variation Parameters:

• Power Rating: Equal or greater than 0.125W (1/8W)
• Temperature Coefficient: Equal or lower absolute value
• Automotive qualification (AEC-Q200): Optional enhancement

All three substitute parts meet the mandatory matching criteria. ERJ-6BQF1R2V offers increased power dissipation (0.333W) suitable for higher current applications. ERJ-6RQF1R2V and RMCF0805FT1R20 maintain identical power ratings while providing automotive-grade AEC-Q200 qualification.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (Pin-for-Pin, Specification-for-Specification): ERJ-6RQF1R2V and RMCF0805FT1R20 function as direct equivalents to RC2012F1R2CS. Both maintain identical resistance, tolerance, power rating, and package dimensions. Both are ROHS3 compliant with MSL 1 rating. Selection between these two depends on supplier availability and procurement lead times. Both incorporate AEC-Q200 automotive qualification, which provides enhanced reliability margin without design impact.

Enhanced Performance Substitute: ERJ-6BQF1R2V provides increased power dissipation capability (0.333W versus 0.125W) within the identical 0805 package footprint. This substitute is applicable when circuit design requires higher current handling or thermal margin. The slightly increased seated height (0.028" versus 0.026") must be verified against PCB assembly clearance specifications. Temperature coefficient improvement (±200ppm/°C versus ±300ppm/°C) provides superior stability across the operating temperature range.

Compliance Considerations: All substitute parts maintain ROHS3 compliance and MSL 1 rating. All operate across the full -55°C ~ 155°C temperature range. All are manufactured by established suppliers with active product status and documented inventory availability.

Frequently Asked Questions (FAQ)

Q: Can ERJ-6BQF1R2V replace RC2012F1R2CS in all applications? A: ERJ-6BQF1R2V is electrically compatible as a direct substitute. The increased power rating (0.333W versus 0.125W) presents no functional limitation. The seated height difference (0.028" versus 0.026") requires verification against PCB assembly specifications and solder reflow profiles to confirm no mechanical interference occurs.

Q: What is the difference between ERJ-6RQF1R2V and RMCF0805FT1R20? A: Both parts are functionally equivalent to RC2012F1R2CS with identical electrical specifications. ERJ-6RQF1R2V is manufactured by Panasonic; RMCF0805FT1R20 is manufactured by Stackpole Electronics Inc. Selection is based on supplier availability, procurement lead times, and inventory status. RMCF0805FT1R20 matches the original seated height (0.026"), while ERJ-6RQF1R2V is slightly taller (0.028").

Q: Are all substitute parts automotive-qualified? A: ERJ-6BQF1R2V, ERJ-6RQF1R2V, and RMCF0805FT1R20 all carry AEC-Q200 automotive qualification. RC2012F1R2CS does not specify automotive qualification. For non-automotive applications, this difference is not relevant. For automotive applications, the substitute parts provide additional qualification assurance.

Q: Does the temperature coefficient difference affect circuit performance? A: RC2012F1R2CS specifies ±300ppm/°C; all substitute parts specify ±200ppm/°C. The lower temperature coefficient of substitute parts provides improved resistance stability across temperature extremes. For circuits with tight tolerance requirements or wide operating temperature ranges, this represents a performance enhancement.

Q: Can these parts be used interchangeably on the same PCB assembly? A: Yes, all substitute parts use identical 0805 (2012 Metric) package footprints and land patterns. Pad spacing and solder reflow compatibility are equivalent. The seated height variation (0.026" to 0.028") is within standard PCB assembly tolerances and does not affect interchangeability.

Q: What is MSL 1 rating significance? A: MSL 1 (Moisture Sensitivity Level 1) indicates unlimited shelf life without moisture bake-out requirements. All parts in this comparison carry MSL 1 rating, eliminating moisture-related handling constraints during storage and assembly.