RC2012F19R6CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F19R6CS is a 19.6 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format with 0.125W power rating. This component is classified as Active product status and is RoHS3 compliant with MSL Level 1 (Unlimited moisture sensitivity). Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component requirements for direct circuit board replacement without design modification.

Substiute Parts

RC2012F19R6CS

Samsung Electro-MechanicsIn Stock: 1092RC2012F19R6CS Datasheet

Current PartRFQ

RC0805FR-0719R6L

YAGEOIn Stock: 11322RC0805FR-0719R6L Datasheet

DirectRFQ

ERJ-6ENF19R6V

Panasonic Electronic ComponentsIn Stock: 13837ERJ-6ENF19R6V Datasheet

SimilarRFQ

RMCF0805FT19R6

Stackpole Electronics IncIn Stock: 3928RMCF0805FT19R6 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC2012F19R6CS are qualified based on strict electrical and mechanical parameter matching. All substitute candidates must satisfy the following criteria:

Mandatory Matching Parameters:

• Resistance Value: 19.6 Ohms
• Tolerance: ±1%
• Power Rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS3 Compliance
• MSL Level 1 (Unlimited)

All identified substitute parts meet these mandatory criteria. Substitute parts are further categorized by additional features: moisture resistance (standard feature) and automotive AEC-Q200 qualification (available in select alternatives).

Parameter Comparison

Engineering Selection Recommendations

RC0805FR-0719R6L (YAGEO): Direct substitute with identical electrical specifications and moisture-resistant thick film composition. Seated height of 0.024" (0.60mm) is within acceptable tolerance variance for 0805 package applications. Active product status with full RoHS3 and MSL 1 compliance. Suitable for general industrial and consumer applications requiring standard moisture resistance.

ERJ-6ENF19R6V (Panasonic): Qualified substitute with automotive AEC-Q200 certification. Electrical parameters match RC2012F19R6CS exactly. Seated height of 0.028" (0.70mm) remains within 0805 package tolerance specifications. Recommended for automotive and high-reliability applications where AEC-Q200 qualification is required or preferred.

RMCF0805FT19R6 (Stackpole Electronics Inc): Qualified substitute with automotive AEC-Q200 certification. Electrical specifications and thermal characteristics identical to main part. Seated height of 0.026" (0.65mm) matches original component height specification. Suitable for automotive applications and environments requiring AEC-Q200 rated components.

All three substitute parts maintain Active product status and full regulatory compliance (RoHS3, REACH Unaffected, EAR99 classification). Selection between substitutes depends on application requirements: standard industrial use (YAGEO), automotive applications (Panasonic or Stackpole).

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-0719R6L replace RC2012F19R6CS in any application?

A: RC0805FR-0719R6L is a direct electrical and mechanical substitute. All critical parameters including resistance, tolerance, power rating, package dimensions, temperature range, and compliance certifications are identical. The 0.002" (0.06mm) height difference is within standard 0805 package tolerance and does not affect circuit board assembly or performance.

Q: What is the difference between standard and AEC-Q200 qualified substitutes?

A: ERJ-6ENF19R6V and RMCF0805FT19R6 carry automotive AEC-Q200 qualification, indicating compliance with automotive industry reliability and quality standards. RC0805FR-0719R6L does not carry this certification. For non-automotive applications, all three parts are functionally equivalent. For automotive or high-reliability applications, AEC-Q200 qualified parts are preferred.

Q: Are there height differences between substitute parts?

A: Seated height specifications vary slightly: RC2012F19R6CS (0.66mm), RC0805FR-0719R6L (0.60mm), ERJ-6ENF19R6V (0.70mm), RMCF0805FT19R6 (0.65mm). All values fall within standard 0805 package tolerance. Height variations do not affect circuit board layout, component placement, or electrical performance.

Q: Do all substitute parts have the same moisture sensitivity rating?

A: All parts including the main component carry MSL Level 1 (Unlimited) rating, indicating no moisture sensitivity restrictions. Storage, handling, and assembly processes are identical across all four parts.

Q: What compliance certifications apply to all substitute parts?

A: All parts are RoHS3 compliant, REACH Unaffected, and classified as EAR99 for export control purposes. HTSUS code 8533.21.0030 applies uniformly across all parts.