RC2012F16R2CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F16R2CS is a 16.2 Ohm ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status and is supplied in Tape & Reel packaging. The part is ROHS3 compliant with Moisture Sensitivity Level 1 (Unlimited), making it suitable for general industrial and commercial applications. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and environmental ratings to ensure direct interchangeability in circuit designs.

Substiute Parts

RC2012F16R2CS

Samsung Electro-MechanicsIn Stock: 1132RC2012F16R2CS Datasheet

Current PartRFQ

RC0805FR-0716R2L

YAGEOIn Stock: 9154RC0805FR-0716R2L Datasheet

DirectRFQ

CRCW080516R2FKEA

Vishay DaleIn Stock: 20702CRCW080516R2FKEA Datasheet

SimilarRFQ

ERJ-6ENF16R2V

Panasonic Electronic ComponentsIn Stock: 98074ERJ-6ENF16R2V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC2012F16R2CS are classified based on strict electrical and mechanical parameter matching. All substitute candidates must satisfy the following criteria:

Critical Matching Parameters:

• Resistance value: 16.2 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Package: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C
• RoHS3 compliance
• MSL rating: 1 (Unlimited)

All identified substitute parts meet these core parameters. Variations in physical height (seated maximum) and specific feature sets (such as automotive AEC-Q200 qualification) do not prevent substitution, as these represent enhanced or alternative specifications within the same functional category.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed are functionally equivalent to the RC2012F16R2CS based on matching electrical and mechanical specifications. Selection among these alternatives depends on application-specific requirements and supply chain considerations:

RC0805FR-0716R2L (YAGEO): Direct equivalent with identical moisture-resistant feature set. Suitable for general industrial applications requiring standard thick film resistor performance.

CRCW080516R2FKEA (Vishay Dale): Equivalent part with automotive AEC-Q200 qualification. Appropriate for applications requiring automotive-grade reliability and qualification documentation.

ERJ-6ENF16R2V (Panasonic): Equivalent part with automotive AEC-Q200 qualification. Appropriate for applications requiring automotive-grade reliability and qualification documentation.

All parts maintain ROHS3 compliance, MSL 1 rating, and identical electrical performance within the specified operating temperature range of -55°C to 155°C.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-0716R2L replace RC2012F16R2CS in any application?

A: Yes. Both parts share identical electrical specifications (16.2 Ohms ±1%, 0.125W), composition (thick film), temperature coefficient (±100ppm/°C), and operating range (-55°C ~ 155°C). Physical height difference (0.024" vs 0.026") is within standard PCB assembly tolerances for 0805 packages.

Q: What is the difference between the Samsung part and the Vishay/Panasonic alternatives?

A: The Vishay Dale CRCW080516R2FKEA and Panasonic ERJ-6ENF16R2V include automotive AEC-Q200 qualification, which the Samsung RC2012F16R2CS does not specify. All other electrical and mechanical parameters are identical. AEC-Q200 qualification is relevant only for automotive applications requiring this certification.

Q: Are there any height restrictions that would prevent substitution?

A: All substitute parts have seated heights between 0.020" and 0.028" (0.50mm to 0.70mm). These variations are standard for 0805 package resistors and do not prevent PCB assembly or circuit operation. Height differences should be verified against specific PCB design constraints if clearance is critical.

Q: Do all substitute parts have the same moisture sensitivity rating?

A: Yes. All parts listed have MSL 1 (Unlimited) rating, indicating unlimited shelf life without moisture bake requirements. Storage and handling conditions are equivalent across all alternatives.

Q: Can automotive-qualified parts be used in non-automotive applications?

A: Yes. Automotive-qualified parts (CRCW080516R2FKEA and ERJ-6ENF16R2V) exceed standard industrial specifications and are fully compatible with non-automotive applications. Their use in general industrial circuits introduces no compatibility issues.

Q: Are all parts available in Tape & Reel packaging?

A: Yes. All substitute parts are supplied in Tape & Reel (TR) packaging, matching the original RC2012F16R2CS packaging format for automated assembly compatibility.