RC2012F165CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F165CS is a 1.6 MOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with moisture-resistant construction and unlimited moisture sensitivity level (MSL 1). The part is RoHS3 compliant and REACH unaffected, suitable for general industrial and consumer applications requiring precision resistive elements in compact surface-mount form factors.

Equivalent and substitute parts are identified when design requirements necessitate alternative sourcing due to inventory constraints, supply chain considerations, or application-specific certifications such as automotive qualification.

Substiute Parts

RC2012F165CS

Samsung Electro-MechanicsIn Stock: 1140RC2012F165CS Datasheet

Current PartRFQ

CRCW08051M60FKEA

Vishay DaleIn Stock: 19499CRCW08051M60FKEA Datasheet

SimilarRFQ

ERJ-6ENF1604V

Panasonic Electronic ComponentsIn Stock: 65555ERJ-6ENF1604V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC2012F165CS are qualified based on strict electrical and mechanical parameter matching:

Primary Substitution Criteria:

• Resistance value: 1.6 MOhms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.125W / 1/8W (exact match required)
• Package: 0805 (2012 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C to 155°C (exact match required)
• RoHS3 compliance: Required
• MSL rating: 1 (Unlimited) or equivalent (exact match required)

Identified Substitutes:

1. CRCW08051M60FKEA (Vishay Dale) – Meets all primary criteria with automotive AEC-Q200 qualification
2. ERJ-6ENF1604V (Panasonic Electronic Components) – Meets all primary criteria with automotive AEC-Q200 qualification

Both substitute parts maintain identical electrical specifications and package dimensions while offering automotive-grade reliability ratings.

Parameter Comparison

Engineering Selection Recommendations

RC2012F165CS (Samsung Electro-Mechanics) – Primary selection for general industrial and consumer applications. Active product status with standard moisture-resistant thick film construction. RoHS3 compliant and REACH unaffected. Suitable for applications without automotive qualification requirements.

CRCW08051M60FKEA (Vishay Dale) – Substitute selection for applications requiring automotive-grade reliability. Carries AEC-Q200 qualification. Seated height of 0.020" (0.50mm) is lower than primary part, providing potential advantage in space-constrained PCB layouts. Active product status with full RoHS3 and REACH compliance.

ERJ-6ENF1604V (Panasonic Electronic Components) – Substitute selection for applications requiring automotive-grade reliability. Carries AEC-Q200 qualification. Seated height of 0.028" (0.70mm) is higher than primary part. Active product status with full RoHS3 and REACH compliance. Highest inventory availability among all three options.

All three parts are electrically and mechanically interchangeable within the specified parameter tolerances. Selection between substitutes depends on application-specific requirements for automotive qualification and PCB height constraints.

Frequently Asked Questions (FAQ)

Q: Can CRCW08051M60FKEA replace RC2012F165CS in any application?

A: CRCW08051M60FKEA meets all electrical and mechanical parameters of RC2012F165CS. The primary difference is automotive AEC-Q200 qualification, which adds reliability assurance for automotive environments. Seated height is 0.020" versus 0.026", which may affect PCB layout in height-constrained designs. Substitution is valid for applications where automotive qualification is not detrimental.

Q: What is the significance of the height difference between these parts?

A: The three parts have different maximum seated heights: RC2012F165CS (0.026"), CRCW08051M60FKEA (0.020"), and ERJ-6ENF1604V (0.028"). These variations are within normal manufacturing tolerances for 0805 package components. Height differences may impact PCB design in applications with strict vertical clearance requirements or where components are mounted near other tall components.

Q: Are all three parts RoHS3 compliant?

A: Yes. RC2012F165CS, CRCW08051M60FKEA, and ERJ-6ENF1604V are all RoHS3 compliant and REACH unaffected, meeting current environmental regulatory requirements for electronic components.

Q: What does AEC-Q200 qualification mean?

A: AEC-Q200 is an automotive electronics council qualification standard for passive components. CRCW08051M60FKEA and ERJ-6ENF1604V carry this certification, indicating they meet automotive industry reliability and quality standards. RC2012F165CS does not carry this designation but remains suitable for non-automotive applications.

Q: Can these parts be used interchangeably on the same PCB?

A: Yes, all three parts share identical 0805 (2012 Metric) package footprints and electrical specifications (1.6 MOhms ±1%, 0.125W, ±100ppm/°C, -55°C to 155°C). They are footprint-compatible and electrically interchangeable. Minor height variations do not affect standard PCB assembly processes.

Q: What is MSL 1 (Unlimited) moisture sensitivity level?

A: MSL 1 indicates the lowest moisture sensitivity classification. Components with MSL 1 have unlimited shelf life and do not require special moisture-controlled storage or baking procedures before soldering. All three parts carry this classification.

Q: Which part should I select for new designs?

A: Selection depends on application requirements. For general industrial/consumer applications, RC2012F165CS is appropriate. For automotive applications or designs requiring enhanced reliability assurance, CRCW08051M60FKEA or ERJ-6ENF1604V are recommended. ERJ-6ENF1604V offers highest inventory availability.