Equivalent & Substitute Parts for RC2012F162CS

Part Overview

The RC2012F162CS is a 1.6 kOhms ±1% 0.125W (1/8W) chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This thick film, moisture-resistant component operates across -55°C to 155°C and is ROHS3 compliant with MSL 1 rating. The part is currently Active in product status with 1032 pieces in stock. Equivalent and substitute parts are identified to support procurement flexibility, design redundancy, and supply chain continuity.

Substiute Parts

RC2012F162CS

Samsung Electro-MechanicsIn Stock: 1048RC2012F162CS Datasheet

Current PartRFQ

RC0805FR-071K6L

YAGEOIn Stock: 151433RC0805FR-071K6L Datasheet

DirectRFQ

CRCW08051K60FKEA

Vishay DaleIn Stock: 17225CRCW08051K60FKEA Datasheet

SimilarRFQ

CRCW08051K60FKEAHP

Vishay DaleIn Stock: 15442CRCW08051K60FKEAHP Datasheet

SimilarRFQ

ERJ-6ENF1601V

Panasonic Electronic ComponentsIn Stock: 46689ERJ-6ENF1601V Datasheet

SimilarRFQ

ERJ-P06F1601V

Panasonic Electronic ComponentsIn Stock: 22231ERJ-P06F1601V Datasheet

SimilarRFQ

RCS08051K60FKEA

Vishay DaleIn Stock: 3934RCS08051K60FKEA Datasheet

SimilarRFQ

RMCF0805FT1K60

Stackpole Electronics IncIn Stock: 22328RMCF0805FT1K60 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility is determined by strict equivalence across the following critical parameters:

Primary Substitution Criteria:

• Resistance value: 1.6 kOhms
• Tolerance: ±1%
• Package / Case: 0805 (2012 Metric)
• Composition: Thick Film
• Temperature Coefficient: ±100ppm/°C
• Operating Temperature Range: -55°C ~ 155°C
• RoHS Status: ROHS3 Compliant
• MSL Rating: 1 (Unlimited)

Secondary Consideration:

• Power Rating: Parts are grouped by 0.125W (1/8W) or 0.5W (1/2W) ratings. Higher power-rated parts (0.5W) are functionally compatible in applications designed for 0.125W, but represent design margin enhancement rather than direct equivalence.

Certification Distinction:

• Standard industrial-grade parts (moisture-resistant only)
• Automotive AEC-Q200 qualified parts (additional qualification for automotive applications)

Substitute parts meeting all primary criteria are classified as Direct Equivalents. Parts with identical electrical and mechanical specifications but enhanced certifications (AEC-Q200) or higher power ratings are classified as Similar/Compatible Substitutes.

Parameter Comparison

Engineering Selection Recommendations

Direct Equivalent (0.125W, 1/8W, Moisture Resistant):

RC0805FR-071K6L (YAGEO) is the primary direct equivalent to RC2012F162CS. Both parts share identical electrical specifications (1.6 kΩ ±1%, 0.125W, ±100ppm/°C, -55°C to 155°C), package format (0805), composition (thick film), and compliance status (ROHS3, MSL 1). YAGEO inventory availability (151,349 pieces) exceeds Samsung Electro-Mechanics stock, supporting supply chain continuity.

Compatible Substitutes (0.125W, 1/8W, AEC-Q200 Automotive Qualified):

CRCW08051K60FKEA (Vishay Dale), ERJ-6ENF1601V (Panasonic), and RMCF0805FT1K60 (Stackpole Electronics) are functionally compatible substitutes with identical electrical and mechanical parameters. These parts carry Automotive AEC-Q200 certification, indicating qualification for automotive-grade applications. Selection among these three is determined by PCB layout constraints (height variation: 0.50mm to 0.70mm) and supply availability.

Higher Power Rating Substitutes (0.5W, 1/2W, AEC-Q200 Automotive Qualified):

CRCW08051K60FKEAHP (Vishay Dale), ERJ-P06F1601V (Panasonic), and RCS08051K60FKEA (Vishay Dale) provide 0.5W power rating with pulse withstanding capability. These parts are functionally compatible in applications where the original 0.125W specification provides design margin. All three carry AEC-Q200 certification. Selection is based on PCB layout constraints and supply requirements.

Selection Logic:

For non-automotive applications requiring direct equivalence, RC0805FR-071K6L is recommended. For automotive applications or designs requiring enhanced reliability margins, any AEC-Q200 qualified substitute at 0.125W rating is acceptable. Higher power-rated substitutes (0.5W) are suitable only when circuit design permits increased power dissipation capacity.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-071K6L directly replace RC2012F162CS without design changes?

A: Yes. RC0805FR-071K6L is a direct equivalent. Both parts share identical resistance (1.6 kΩ), tolerance (±1%), power rating (0.125W), package (0805), temperature coefficient (±100ppm/°C), operating range (-55°C to 155°C), and compliance status (ROHS3, MSL 1). No circuit redesign is required.

Q: What is the difference between 0.125W and 0.5W rated substitutes?

A: Power rating indicates maximum continuous power dissipation capacity. A 0.5W part can dissipate four times more power than a 0.125W part in the same package. In applications designed for 0.125W operation, a 0.5W substitute provides additional thermal margin but does not change electrical performance. Substitution is valid only if circuit design permits the higher power rating without thermal or reliability concerns.

Q: Are AEC-Q200 qualified parts suitable for non-automotive applications?

A: Yes. AEC-Q200 certification represents additional qualification testing beyond standard industrial requirements. Parts meeting AEC-Q200 are fully compatible with non-automotive applications and provide enhanced reliability assurance. No design changes are required.

Q: Does package height variation affect substitutability?

A: Package height variation (0.50mm to 0.70mm maximum seated height) is within standard 0805 package tolerance. All listed substitutes are mechanically compatible with PCB layouts designed for 0805 components. Height differences do not affect electrical performance or circuit functionality.

Q: Can I use CRCW08051K60FKEAHP (0.5W) in place of RC2012F162CS (0.125W)?

A: Yes, CRCW08051K60FKEAHP is electrically and mechanically compatible. The higher power rating (0.5W vs. 0.125W) provides additional thermal capacity. Substitution is valid provided the circuit design does not impose constraints on component power dissipation or thermal characteristics.

Q: What is MSL 1 rating and why is it important?

A: MSL (Moisture Sensitivity Level) 1 indicates unlimited shelf life without moisture bake-out requirements. All listed parts carry MSL 1 rating, ensuring compatibility with standard storage and handling procedures. No special moisture control measures are required.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts are ROHS3 compliant, matching the compliance status of RC2012F162CS. No regulatory or environmental concerns arise from substitution.