Equivalent & Substitute Parts for RC2012F160CS

Part Overview

The RC2012F160CS is a 16 Ohm ±1% 0.125W (1/8W) chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This thick film, moisture-resistant component operates across -55°C to 155°C and is ROHS3 compliant with MSL 1 rating. The part is currently in active production status with 1,046 units in stock. Equivalent and substitute parts are identified to support procurement flexibility, supply chain continuity, and application-specific requirements such as automotive qualification or enhanced power ratings.

Substiute Parts

RC2012F160CS

Samsung Electro-MechanicsIn Stock: 1058RC2012F160CS Datasheet

Current PartRFQ

RC0805FR-0716RL

YAGEOIn Stock: 87322RC0805FR-0716RL Datasheet

DirectRFQ

AC0805FR-0716RL

YAGEOIn Stock: 51040AC0805FR-0716RL Datasheet

UpgradeRFQ

CRCW080516R0FKEA

Vishay DaleIn Stock: 5469CRCW080516R0FKEA Datasheet

SimilarRFQ

ERJ-6ENF16R0V

Panasonic Electronic ComponentsIn Stock: 20634ERJ-6ENF16R0V Datasheet

SimilarRFQ

ESR10EZPF16R0

Rohm SemiconductorIn Stock: 185406ESR10EZPF16R0 Datasheet

SimilarRFQ

RMCF0805FT16R0

Stackpole Electronics IncIn Stock: 7085RMCF0805FT16R0 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for RC2012F160CS are classified into three categories based on electrical and mechanical compatibility:

Direct Equivalent (Same Specifications): Parts that match all critical parameters including resistance, tolerance, power rating, package, temperature coefficient, and operating temperature range. These parts are interchangeable without design modification.

Upgrade Equivalent (Enhanced Specifications): Parts that meet or exceed all critical parameters of the main part while adding automotive qualification (AEC-Q200 rating). These parts provide enhanced reliability for automotive and industrial applications while maintaining full backward compatibility.

Similar Equivalent (Compatible with Noted Differences): Parts that match all critical electrical parameters (resistance, tolerance, temperature coefficient, operating temperature) and package format but may differ in power rating, height, or feature set. Selection requires verification that the specific difference does not impact the application.

Substitution Logic:

• Resistance value and tolerance must match exactly (16 Ohms ±1%)
• Package must be 0805 (2012 Metric) with 2 terminations
• Power rating must be equal to or greater than 0.125W
• Temperature coefficient must be ±100ppm/°C
• Operating temperature range must cover -55°C to 155°C
• Composition must be thick film
• RoHS3 compliance and MSL 1 rating required

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Non-Automotive Applications): RC0805FR-0716RL (YAGEO) is the primary direct equivalent. It matches all electrical and mechanical specifications of RC2012F160CS with identical power rating and temperature characteristics. This part is available in high volume (87,257 units) and maintains the same moisture-resistant thick film composition. Packaging is Cut Tape (CT) & Digi-Reel® format.

For Automotive and Enhanced Reliability Applications: AC0805FR-0716RL (YAGEO), CRCW080516R0FKEA (Vishay Dale), ERJ-6ENF16R0V (Panasonic), and RMCF0805FT16R0 (Stackpole) all provide AEC-Q200 automotive qualification. These parts are suitable for automotive, industrial, and mission-critical applications requiring enhanced reliability standards. All maintain the 0.125W power rating and identical electrical specifications.

For Applications Requiring Enhanced Power Margin: ESR10EZPF16R0 (Rohm Semiconductor) provides 0.4W power rating with pulse withstanding capability, offering a 3.2x power margin over the base specification. This part is suitable for high-stress environments or applications with transient power conditions. Highest inventory availability (185,349 units) supports rapid procurement.

Packaging Considerations:

• RC2012F160CS: Tape & Reel (TR) format
• RC0805FR-0716RL: Cut Tape (CT) & Digi-Reel® format
• All other substitutes: Tape & Reel (TR) format

All substitute parts maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, ensuring compatibility with standard handling and storage procedures.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-0716RL be used as a direct replacement for RC2012F160CS? A: Yes. RC0805FR-0716RL matches all critical electrical parameters (16 Ohms ±1%, 0.125W, ±100ppm/°C, -55°C to 155°C) and package format (0805). The only difference is packaging format (Cut Tape vs. Tape & Reel) and slightly lower maximum height (0.60mm vs. 0.66mm), which does not affect electrical performance or PCB assembly compatibility.

Q: What is the difference between the standard and AEC-Q200 qualified parts? A: AEC-Q200 qualification (AC0805FR-0716RL, CRCW080516R0FKEA, ERJ-6ENF16R0V, RMCF0805FT16R0) indicates compliance with automotive industry reliability standards. These parts undergo enhanced testing and quality assurance. All other electrical and mechanical specifications remain identical to the base part. AEC-Q200 parts are required for automotive applications but are also suitable for industrial and mission-critical non-automotive use.

Q: Why does ESR10EZPF16R0 have a higher power rating (0.4W vs. 0.125W)? A: ESR10EZPF16R0 is designed with enhanced thermal characteristics and pulse withstanding capability. The higher power rating provides additional safety margin for applications with transient current spikes or thermal stress. This part is a compatible upgrade that maintains all other specifications while offering improved performance headroom.

Q: Are all substitute parts available in the same package format? A: No. RC2012F160CS and most substitutes use Tape & Reel (TR) packaging. RC0805FR-0716RL uses Cut Tape (CT) & Digi-Reel® format. Both formats are standard for 0805 components and are compatible with automated assembly equipment. Verify packaging format compatibility with your procurement and assembly processes.

Q: Can I use a substitute part with lower maximum height? A: Yes. All substitute parts have maximum heights ranging from 0.50mm to 0.70mm compared to RC2012F160CS at 0.66mm. Lower height components (CRCW080516R0FKEA at 0.50mm) are fully compatible and may provide improved PCB clearance. Higher height components are also compatible as long as PCB layout accommodates the dimension.

Q: What is the difference between moisture-resistant and standard thick film resistors? A: RC2012F160CS and RC0805FR-0716RL are explicitly specified as moisture-resistant. Other substitutes do not list this feature in their descriptions, though all maintain MSL 1 (Unlimited) rating. Moisture-resistant composition provides enhanced protection in humid environments. For applications in high-humidity or marine environments, RC0805FR-0716RL is the preferred direct equivalent.

Q: Are all parts ROHS3 compliant? A: Yes. All listed parts (main part and all substitutes) are ROHS3 compliant and REACH unaffected. All parts are suitable for applications requiring environmental and regulatory compliance with current EU and international standards.

Q: What inventory levels should I consider for procurement? A: ESR10EZPF16R0 has the highest inventory (185,349 units), followed by RC0805FR-0716RL (87,257 units) and AC0805FR-0716RL (50,970 units). For standard applications, RC0805FR-0716RL provides excellent availability. For automotive applications, AC0805FR-0716RL or ERJ-6ENF16R0V (20,530 units) are recommended. Lower inventory parts (CRCW080516R0FKEA at 5,359 units, RMCF0805FT16R0 at 6,985 units) may require longer lead times.