RC2012F1472CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F1472CS is a 14.7 kOhms ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format with 0.125W power rating. This component is classified as Active product status with moisture-resistant construction and ROHS3 compliance. Equivalent and substitute parts are identified when applications require alternative sourcing due to inventory constraints, supply chain considerations, or specific certification requirements such as automotive AEC-Q200 qualification.

Key Parameters

Parameter	Value	Specification
Resistance	14.7 kOhms	Core electrical characteristic
Tolerance	±1%	Precision grade
Power Rating	0.125W (1/8W)	Thermal dissipation capacity
Package / Case	0805 (2012 Metric)	Physical form factor
Composition	Thick Film	Construction technology
Temperature Coefficient	±100ppm/°C	Stability over temperature
Operating Temperature Range	-55°C to 155°C	Environmental limits
Moisture Sensitivity Level (MSL)	1 (Unlimited)	Handling and storage classification
RoHS Status	ROHS3 Compliant	Environmental regulation compliance
Number of Terminations	2	Connection points

Substitute Part Grouping Explanation

Substitution eligibility for the RC2012F1472CS is determined by strict equivalence across the following mandatory parameters:

Electrical Parameters (Non-negotiable):

Resistance value: 14.7 kOhms
Tolerance: ±1%
Power rating: 0.125W (1/8W)
Temperature coefficient: ±100ppm/°C
Operating temperature range: -55°C to 155°C

Physical Parameters (Non-negotiable):

Package / Case: 0805 (2012 Metric)
Number of terminations: 2
Composition: Thick Film

Compliance Parameters (Required):

RoHS3 Compliant
MSL 1 (Unlimited)
REACH Unaffected status

All identified substitute parts meet these criteria. Substitute parts are further categorized by additional features such as automotive AEC-Q200 certification or moisture-resistant construction, which represent functional enhancements rather than deviations from core specifications.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff (ppm/°C)	Op. Temp Range (°C)	Height Max (mm)	Features	Product Status
RC2012F1472CS	Samsung Electro-Mechanics	14.7 kΩ	±1%	0.125	0805	±100	-55 to 155	0.65	Moisture Resistant	Active
CR0805-FX-1472ELF	Bourns Inc.	14.7 kΩ	±1%	0.125	0805	±100	-55 to 155	0.60	Moisture Resistant	Active
ERJ-6ENF1472V	Panasonic Electronic Components	14.7 kΩ	±1%	0.125	0805	±100	-55 to 155	0.70	Automotive AEC-Q200	Active
KTR10EZPF1472	Rohm Semiconductor	14.7 kΩ	±1%	0.125	0805	±100	-55 to 155	0.65	Automotive AEC-Q200, High Voltage	Active
RC0805FR-0714K7L	YAGEO	14.7 kΩ	±1%	0.125	0805	±100	-55 to 155	0.60	Moisture Resistant	Active
RMCF0805FT14K7	Stackpole Electronics Inc	14.7 kΩ	±1%	0.125	0805	±100	-55 to 155	0.65	Automotive AEC-Q200	Active
CRCW080514K7FKEA	Vishay Dale	14.7 kΩ	±1%	0.125	0805	±100	-55 to 155	0.50	Automotive AEC-Q200	Active
MCR10ERTF1472	Rohm Semiconductor	14.7 kΩ	±1%	0.125	0805	±100	-55 to 155	0.65	Standard Thick Film	Discontinued at DiGi Electronics

Engineering Selection Recommendations

Direct Substitutes (Active Status, Equivalent Features):

CR0805-FX-1472ELF (Bourns Inc.) and RC0805FR-0714K7L (YAGEO) are direct functional equivalents with identical electrical specifications and moisture-resistant construction. Both maintain Active product status and ROHS3 compliance. These parts are suitable for direct replacement in applications where the original RC2012F1472CS is specified.

Automotive-Qualified Alternatives (AEC-Q200 Certified):

ERJ-6ENF1472V (Panasonic), KTR10EZPF1472 (Rohm Semiconductor), RMCF0805FT14K7 (Stackpole Electronics Inc), and CRCW080514K7FKEA (Vishay Dale) are all AEC-Q200 qualified alternatives. These parts meet automotive industry reliability standards and are suitable for applications requiring automotive-grade components. All maintain identical electrical parameters and Active product status. Selection among these options depends on specific application requirements and supply availability.

Discontinued Part (Limited Availability):

MCR10ERTF1472 (Rohm Semiconductor) is marked as Discontinued at DiGi Electronics. While electrically equivalent, this part should not be selected for new designs or applications requiring long-term supply assurance.

Height Considerations:

Component height varies between 0.50mm and 0.70mm across the substitute range. CRCW080514K7FKEA offers the lowest profile at 0.50mm, while ERJ-6ENF1472V reaches 0.70mm maximum. Height selection is relevant only for applications with specific PCB clearance constraints.

Frequently Asked Questions (FAQ)

Q: Can I use any of these substitute parts interchangeably with the RC2012F1472CS?

A: All listed substitute parts with Active product status (CR0805-FX-1472ELF, ERJ-6ENF1472V, KTR10EZPF1472, RC0805FR-0714K7L, RMCF0805FT14K7, CRCW080514K7FKEA) are electrically and mechanically equivalent. Direct substitution is valid. MCR10ERTF1472 should not be used for new applications due to discontinued status.

Q: What is the difference between moisture-resistant and automotive AEC-Q200 variants?

A: Moisture-resistant variants (CR0805-FX-1472ELF, RC0805FR-0714K7L) are optimized for humidity protection. Automotive AEC-Q200 variants (ERJ-6ENF1472V, KTR10EZPF1472, RMCF0805FT14K7, CRCW080514K7FKEA) meet automotive industry reliability and qualification standards. Both feature sets are independent; a part may have one, both, or neither. Selection depends on application environment.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All substitute parts listed maintain ROHS3 Compliant status and REACH Unaffected classification, matching the original RC2012F1472CS environmental compliance profile.

Q: Does component height affect PCB layout compatibility?

A: Component height ranges from 0.50mm to 0.70mm maximum seated height. For standard PCB applications with typical clearance specifications, this variation is not functionally significant. Height becomes relevant only in space-constrained designs with specific clearance requirements below 0.65mm.

Q: Why is MCR10ERTF1472 listed if it is discontinued?

A: MCR10ERTF1472 is included for reference purposes in existing designs or legacy applications. For new designs or long-term supply requirements, select from the Active status alternatives.

Q: What packaging formats are available for these substitute parts?

A: The primary substitute parts are supplied in Tape & Reel (TR) format. MCR10ERTF1472 is available in Cut Tape (CT) & Digi-Reel® format. Packaging selection depends on manufacturing volume and assembly process requirements.

Q: Can I mix different manufacturers' parts in the same production batch?

A: All substitute parts meet identical electrical and mechanical specifications. Mixing manufacturers is technically valid from a functional standpoint. However, manufacturing and quality control practices may vary by supplier. Consistency within a single production batch is recommended for traceability and quality assurance purposes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message