RC2012F13R3CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F13R3CS is a 13.3 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.125W (1/8W) in 0805 (2012 Metric) package format. This component is classified as Active product status with moisture-resistant construction and RoHS3 compliance. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and environmental ratings align with the original component, enabling direct replacement in circuit applications without design modification.

Substiute Parts

RC2012F13R3CS

Samsung Electro-MechanicsIn Stock: 1033RC2012F13R3CS Datasheet

Current PartRFQ

RC0805FR-0713R3L

YAGEOIn Stock: 11077RC0805FR-0713R3L Datasheet

DirectRFQ

CRCW080513R3FKEA

Vishay DaleIn Stock: 17042CRCW080513R3FKEA Datasheet

SimilarRFQ

ERJ-6ENF13R3V

Panasonic Electronic ComponentsIn Stock: 43007ERJ-6ENF13R3V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC2012F13R3CS are qualified based on the following criteria:

Electrical Parameters (Critical):

• Resistance value: 13.3 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Critical):

• Package type: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Number of terminations: 2

Environmental & Compliance Parameters:

• Composition: Thick Film
• Moisture resistance: Required
• RoHS3 compliance: Required
• MSL rating: 1 (Unlimited)
• REACH status: Unaffected

All identified substitute parts meet these core parameters. Variations in seated height and packaging format (Tape & Reel vs. Cut Tape) do not affect electrical or functional compatibility.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts are qualified for direct replacement of the RC2012F13R3CS based on electrical and mechanical parameter equivalence.

RC0805FR-0713R3L (YAGEO): Direct equivalent with identical electrical specifications and Tape & Reel packaging. Seated height of 0.024" (0.60mm) is within acceptable tolerance for 0805 package applications. RoHS3 compliant with MSL 1 rating.

CRCW080513R3FKEA (Vishay Dale): Meets all electrical and mechanical requirements with additional AEC-Q200 automotive qualification. Lowest seated height at 0.020" (0.50mm). Available in Cut Tape and Digi-Reel packaging formats. RoHS3 compliant with MSL 1 rating. Suitable for automotive and industrial applications requiring enhanced reliability standards.

ERJ-6ENF13R3V (Panasonic): Meets all electrical and mechanical requirements with AEC-Q200 automotive qualification. Highest seated height at 0.028" (0.70mm), remaining within 0805 package specifications. Tape & Reel packaging. RoHS3 compliant with MSL 1 rating. Suitable for automotive and industrial applications.

All parts maintain Active product status and full RoHS3 and REACH compliance. Selection among substitutes depends on packaging format availability, supply chain requirements, and application-specific qualification needs.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-0713R3L replace RC2012F13R3CS in all applications?

A: Yes. Both components share identical electrical specifications (13.3 Ohms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C), identical package dimensions (0805/2012 Metric), and equivalent environmental ratings (RoHS3, MSL 1). The 0.002" (0.06mm) difference in seated height is within standard 0805 package tolerance and does not affect PCB assembly or circuit performance.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on continuous carrier tape wound on reels, suitable for high-volume automated assembly. Cut Tape supplies components on cut segments of carrier tape, suitable for lower-volume or manual assembly. Both formats contain identical components. CRCW080513R3FKEA is available in Cut Tape and Digi-Reel formats, while RC0805FR-0713R3L and ERJ-6ENF13R3V are supplied in Tape & Reel format.

Q: Are the automotive-qualified parts (CRCW080513R3FKEA and ERJ-6ENF13R3V) required for non-automotive applications?

A: No. AEC-Q200 qualification is an additional reliability certification applicable to automotive environments. For non-automotive applications, all three substitutes meet identical electrical and environmental requirements. Selection should be based on packaging availability and supply chain considerations.

Q: What does MSL 1 (Unlimited) mean for moisture sensitivity?

A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture-control storage or handling procedures. All four parts (original and substitutes) carry MSL 1 rating, eliminating moisture-related compatibility concerns.

Q: Can seated height variations affect PCB assembly?

A: Seated height variations among 0805 package components (0.020" to 0.028") are within standard manufacturing tolerances and do not affect PCB assembly, solder reflow, or component placement. All substitute parts are compatible with standard 0805 assembly processes.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. RC2012F13R3CS, RC0805FR-0713R3L, CRCW080513R3FKEA, and ERJ-6ENF13R3V are all RoHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements for electronic component manufacturing and use.