RC2012F122CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F122CS is a 1.2 kOhms ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with moisture resistant characteristics and unlimited moisture sensitivity level (MSL 1). The part is ROHS3 compliant and REACH unaffected, making it suitable for general industrial and consumer applications. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and environmental ratings to ensure direct circuit board compatibility and functional interchangeability.

Key Parameters

Parameter	Value
Resistance	1.2 kOhms
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Number of Terminations	2

Substitute Part Grouping Explanation

Substitute parts for the RC2012F122CS are categorized into two groups based on substitution compatibility:

Direct Substitutes maintain identical electrical and mechanical specifications:

Resistance: 1.2 kOhms ±1%
Power Rating: 0.125W (1/8W)
Package: 0805 (2012 Metric)
Temperature Coefficient: ±100ppm/°C
Operating Temperature: -55°C ~ 155°C
Composition: Thick Film
Moisture Sensitivity Level: 1 (Unlimited)
RoHS Status: ROHS3 Compliant

Similar Substitutes share core electrical specifications but include enhanced features (automotive AEC-Q200 certification, higher power ratings, or additional environmental protection) that provide functional equivalence with extended application scope. These parts are interchangeable in standard applications but offer additional performance margins or certifications.

The key parameters determining substitution eligibility are: resistance value, tolerance, power rating, package dimensions, temperature coefficient, and operating temperature range. All substitute parts listed maintain these core specifications within the allowed parameters.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (Watts)	Package	Temp Coeff	Op Temp Range	Features	Height Max	Packaging Type
RC2012F122CS	Samsung Electro-Mechanics	1.2 kOhms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	0.65mm	Tape & Reel
CR0805-FX-1201ELF	Bourns Inc.	1.2 kOhms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	0.60mm	Cut Tape & Digi-Reel
CRG0805F1K2	TE Connectivity Passive Product	1.2 kOhms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	—	0.65mm	Tape & Reel
ERJ-6ENF1201V	Panasonic Electronic Components	1.2 kOhms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	0.70mm	Cut Tape & Digi-Reel
KTR10EZPF1201	Rohm Semiconductor	1.2 kOhms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, High Voltage	0.65mm	Tape & Reel
RC0805FR-071K2L	YAGEO	1.2 kOhms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	0.60mm	Cut Tape & Digi-Reel
RMCF0805FT1K20	Stackpole Electronics Inc	1.2 kOhms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	0.65mm	Tape & Reel
AC0805FR-071K2L	YAGEO	1.2 kOhms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, Moisture Resistant	0.60mm	Cut Tape & Digi-Reel
CRCW08051K20FKEA	Vishay Dale	1.2 kOhms	±1%	0.125W	0805	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	0.50mm	Tape & Reel
CRCW08051K20FKEAHP	Vishay Dale	1.2 kOhms	±1%	0.5W	0805	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, Pulse Withstanding	0.50mm	Cut Tape & Digi-Reel
ERJ-UP6F1201V	Panasonic Electronic Components	1.2 kOhms	±1%	0.5W	0805	±100ppm/°C	-55°C ~ 155°C	Anti-Sulfur, Automotive AEC-Q200, Pulse Withstanding	0.70mm	Tape & Reel

Engineering Selection Recommendations

For Standard Industrial Applications: CR0805-FX-1201ELF (Bourns Inc.) and RC0805FR-071K2L (YAGEO) provide direct electrical and mechanical equivalence to the RC2012F122CS with moisture resistant characteristics. Both parts maintain identical resistance, tolerance, power rating, and temperature specifications. Selection between these options depends on packaging preference (Tape & Reel versus Cut Tape & Digi-Reel) and inventory availability.

For Automotive Applications: RMCF0805FT1K20 (Stackpole Electronics Inc.), AC0805FR-071K2L (YAGEO), and CRCW08051K20FKEA (Vishay Dale) are qualified to AEC-Q200 automotive standards while maintaining the core 1.2 kOhms ±1% 0.125W specification. These parts are suitable for automotive circuit designs requiring component qualification documentation.

For High-Voltage or Pulse-Withstanding Applications: KTR10EZPF1201 (Rohm Semiconductor) includes high-voltage capability. CRCW08051K20FKEAHP (Vishay Dale) and ERJ-UP6F1201V (Panasonic Electronic Components) provide pulse-withstanding characteristics with 0.5W power rating, offering enhanced performance margins for demanding circuit conditions. These parts are interchangeable in standard 0.125W applications but provide additional design headroom.

For Anti-Sulfur Environments: ERJ-UP6F1201V (Panasonic Electronic Components) includes anti-sulfur protection suitable for applications exposed to corrosive atmospheric conditions.

All listed substitute parts are ROHS3 compliant, REACH unaffected, and maintain MSL 1 (Unlimited) moisture sensitivity level, ensuring regulatory compliance and environmental compatibility with the original RC2012F122CS specification.

Frequently Asked Questions (FAQ)

Q: Can I substitute CR0805-FX-1201ELF for RC2012F122CS in my circuit design?

A: Yes. CR0805-FX-1201ELF maintains identical electrical specifications (1.2 kOhms ±1%, 0.125W, ±100ppm/°C, -55°C ~ 155°C) and package dimensions (0805). Both parts are moisture resistant thick film resistors with MSL 1 rating. The primary difference is packaging format (Cut Tape & Digi-Reel versus Tape & Reel) and maximum seated height (0.60mm versus 0.65mm), which does not affect circuit functionality.

Q: What is the difference between direct substitutes and similar substitutes?

A: Direct substitutes (CR0805-FX-1201ELF, CRG0805F1K2, RC0805FR-071K2L) match all core electrical and mechanical parameters of the RC2012F122CS. Similar substitutes include automotive AEC-Q200 certification, higher power ratings (0.5W), or additional features (pulse withstanding, anti-sulfur protection). Similar substitutes are functionally interchangeable in standard applications but provide enhanced capabilities for specialized environments.

Q: Are automotive-qualified parts (AEC-Q200) interchangeable with the standard RC2012F122CS?

A: Yes, for electrical and mechanical compatibility. AEC-Q200 qualified parts such as RMCF0805FT1K20, AC0805FR-071K2L, and CRCW08051K20FKEA maintain identical 1.2 kOhms ±1% 0.125W specifications and 0805 package dimensions. AEC-Q200 certification indicates additional qualification testing and reliability documentation required for automotive applications. These parts are suitable for non-automotive circuits and provide equivalent performance with additional qualification documentation.

Q: Can I use CRCW08051K20FKEAHP (0.5W) in place of RC2012F122CS (0.125W)?

A: Yes, for circuit compatibility. CRCW08051K20FKEAHP maintains the same 1.2 kOhms ±1% resistance and 0805 package. The higher 0.5W power rating provides additional thermal margin and pulse withstanding capability. This substitution is suitable when circuit conditions may exceed standard 0.125W dissipation limits or when pulse immunity is required. The part is physically compatible with 0805 footprints.

Q: What packaging options are available for substitute parts?

A: Substitute parts are supplied in two packaging formats: Tape & Reel (TR) for automated assembly and Cut Tape & Digi-Reel for manual or mixed-volume applications. Tape & Reel packaging is standard for high-volume production. Cut Tape & Digi-Reel is suitable for lower-volume builds or component kitting. Both formats contain identical components; packaging selection depends on assembly process requirements.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts maintain ROHS3 compliance and REACH unaffected status, matching the environmental regulatory requirements of the RC2012F122CS. This ensures compliance with EU and international electronic waste and hazardous substance directives.

Q: What is the significance of moisture sensitivity level (MSL) 1?

A: MSL 1 (Unlimited) indicates the component has no moisture sensitivity restrictions. The part does not require special moisture-controlled storage, handling, or baking procedures prior to soldering. All substitute parts listed maintain MSL 1 rating, ensuring identical storage and handling requirements.

Q: Can I mix different manufacturers' parts in the same circuit board assembly?

A: Yes. All substitute parts listed meet identical electrical specifications (1.2 kOhms ±1%, 0.125W, ±100ppm/°C) and mechanical requirements (0805 package, 2 terminations). Mixing manufacturers is acceptable from a functional standpoint. However, for production consistency and supply chain management, maintaining single-source parts per design is recommended where feasible.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message