RC2012F120CS 12 Ohm 1% 1/8W 0805 SMD Chip Resistor Equivalent & Substitute Parts

Part Overview

The RC2012F120CS is a 12 Ohm ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status with moisture resistant characteristics and ROHS3 compliance. The RC2012F120CS serves as a precision current-limiting, biasing, or signal conditioning element in electronic circuits requiring stable resistance values across extended temperature ranges. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and environmental ratings to ensure direct functional interchangeability in circuit applications.

Key Parameters

Parameter	Value	Unit
Resistance	12	Ohms
Tolerance	±1%	-
Power Rating	0.125	W (1/8W)
Package / Case	0805 (2012 Metric)	-
Composition	Thick Film	-
Temperature Coefficient	±100	ppm/°C
Operating Temperature Range	-55 to 155	°C
Dimensions (L x W)	2.00 x 1.25	mm
Height (Seated Max)	0.65	mm
Terminations	2	-
RoHS Status	ROHS3 Compliant	-
MSL Rating	1 (Unlimited)	-

Substitute Part Grouping Explanation

Substitute parts for the RC2012F120CS are classified into two categories based on electrical and mechanical parameter alignment:

Direct Substitutes (Identical Electrical & Mechanical Specifications): Parts matching all critical parameters: 12 Ohms resistance, ±1% tolerance, 0.125W power rating, 0805 package, thick film composition, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range. These parts maintain identical form factor, fit, and functional performance in circuit applications.

Similar Substitutes (Matching Core Specifications with Feature Variations): Parts matching resistance, tolerance, package, and temperature range but differing in secondary characteristics such as automotive AEC-Q200 certification, pulse withstanding capability, anti-sulfur treatment, or higher power ratings (0.5W). These parts provide functional equivalence with enhanced environmental or performance features suitable for specific application requirements.

Key Substitution Criteria:

Resistance value: 12 Ohms (exact match required)
Tolerance: ±1% (exact match required)
Package: 0805 (2012 Metric) (exact match required)
Composition: Thick Film (exact match required)
Temperature Coefficient: ±100ppm/°C (exact match required)
Operating Temperature: -55°C to 155°C (exact match required)
Power Rating: 0.125W minimum (0.5W acceptable for higher margin applications)

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance (Ohms)	Tolerance	Power (W)	Package	Temp Coeff (ppm/°C)	Op Temp (°C)	Height Max (mm)	Features	Product Status
RC2012F120CS	Samsung Electro-Mechanics	12	±1%	0.125	0805	±100	-55 to 155	0.65	Moisture Resistant	Active
CR0805-FX-12R0ELF	Bourns Inc.	12	±1%	0.125	0805	±100	-55 to 155	0.60	Moisture Resistant	Active
ERJ-6ENF12R0V	Panasonic Electronic Components	12	±1%	0.125	0805	±100	-55 to 155	0.70	Automotive AEC-Q200	Active
KTR10EZPF12R0	Rohm Semiconductor	12	±1%	0.125	0805	±100	-55 to 155	0.65	Automotive AEC-Q200, High Voltage	Active
RC0805FR-0712RL	YAGEO	12	±1%	0.125	0805	±100	-55 to 155	0.60	Moisture Resistant	Active
RMCF0805FT12R0	Stackpole Electronics Inc	12	±1%	0.125	0805	±100	-55 to 155	0.65	Automotive AEC-Q200	Active
AC0805FR-0712RL	YAGEO	12	±1%	0.125	0805	±100	-55 to 155	0.60	Automotive AEC-Q200, Moisture Resistant	Active
CRCW080512R0FKEA	Vishay Dale	12	±1%	0.125	0805	±100	-55 to 155	0.50	Automotive AEC-Q200	Active
CRCW080512R0FKEAHP	Vishay Dale	12	±1%	0.5	0805	±100	-55 to 155	0.50	Automotive AEC-Q200, Pulse Withstanding	Active
ERJ-UP6F12R0V	Panasonic Electronic Components	12	±1%	0.5	0805	±100	-55 to 155	0.70	Anti-Sulfur, Automotive AEC-Q200, Pulse Withstanding	Active
MCR10ERTF12R0	Rohm Semiconductor	12	±1%	0.125	0805	±100	-55 to 155	0.65	-	Discontinued at DiGi Electronics

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications):

Select CR0805-FX-12R0ELF (Bourns Inc.), RC0805FR-0712RL (YAGEO), or RMCF0805FT12R0 (Stackpole Electronics Inc.) when direct functional equivalence is required. All three parts maintain 0.125W power rating, ±1% tolerance, and 0805 package dimensions. CR0805-FX-12R0ELF and RC0805FR-0712RL offer the lowest seated height (0.60mm), beneficial for space-constrained PCB layouts. RMCF0805FT12R0 includes automotive AEC-Q200 certification for applications requiring automotive-grade reliability.

For Automotive Applications:

ERJ-6ENF12R0V (Panasonic), KTR10EZPF12R0 (Rohm), AC0805FR-0712RL (YAGEO), CRCW080512R0FKEA (Vishay Dale), and RMCF0805FT12R0 (Stackpole) all carry AEC-Q200 automotive qualification. KTR10EZPF12R0 adds high voltage capability. These parts are suitable for automotive circuit applications where environmental stress screening and reliability standards are mandated.

For Enhanced Power Margin Applications:

CRCW080512R0FKEAHP (Vishay Dale, 0.5W) and ERJ-UP6F12R0V (Panasonic, 0.5W) provide doubled power dissipation capacity while maintaining identical resistance and tolerance. CRCW080512R0FKEAHP includes pulse withstanding capability. ERJ-UP6F12R0V adds anti-sulfur treatment for corrosive environments. These parts are suitable for applications requiring higher transient current handling or thermal margin.

Avoid:

MCR10ERTF12R0 is discontinued at DiGi Electronics and should not be selected for new designs despite matching electrical specifications.

Compliance Verification:

All recommended parts maintain ROHS3 compliance, MSL 1 (Unlimited) moisture sensitivity rating, and REACH unaffected status, matching the RC2012F120CS environmental certifications.

Frequently Asked Questions (FAQ)

Q: Can CRCW080512R0FKEAHP (0.5W) be used as a direct substitute for RC2012F120CS (0.125W)?

A: Yes. The 0.5W part provides identical electrical performance (12 Ohms, ±1%, ±100ppm/°C) and package dimensions (0805). The higher power rating represents a design margin enhancement and does not affect circuit function. The part occupies the same PCB footprint and soldering profile.

Q: What is the difference between moisture resistant and automotive AEC-Q200 rated parts?

A: Moisture resistant parts (RC2012F120CS, CR0805-FX-12R0ELF, RC0805FR-0712RL) are designed to withstand humidity exposure during storage and operation. Automotive AEC-Q200 rated parts (ERJ-6ENF12R0V, KTR10EZPF12R0, RMCF0805FT12R0, AC0805FR-0712RL, CRCW080512R0FKEA) undergo additional environmental stress screening, temperature cycling, and reliability testing per automotive industry standards. AEC-Q200 parts are suitable for both automotive and industrial applications requiring higher reliability assurance.

Q: Does seated height variation (0.50mm to 0.70mm) affect PCB assembly compatibility?

A: Seated height variation within this range does not affect PCB assembly compatibility for standard 0805 package footprints. All parts maintain the same land pattern dimensions (2.00mm x 1.25mm). Height differences may be relevant only in applications with extremely tight vertical clearance constraints or automated optical inspection (AOI) height verification settings.

Q: Are ERJ-UP6F12R0V and CRCW080512R0FKEAHP interchangeable?

A: Yes, both parts are electrically and mechanically interchangeable. Both provide 12 Ohms ±1%, 0.5W power rating, 0805 package, and AEC-Q200 certification. ERJ-UP6F12R0V adds anti-sulfur treatment and pulse withstanding capability. CRCW080512R0FKEAHP provides pulse withstanding capability. Selection depends on whether anti-sulfur protection is required for the specific application environment.

Q: Can MCR10ERTF12R0 be used in new designs?

A: No. MCR10ERTF12R0 is discontinued at DiGi Electronics and should not be selected for new product designs. Use CR0805-FX-12R0ELF, RC0805FR-0712RL, RMCF0805FT12R0, or other active status alternatives instead.

Q: What does ±100ppm/°C temperature coefficient mean for circuit performance?

A: Temperature coefficient specifies resistance change per degree Celsius across the operating range. ±100ppm/°C means the 12 Ohm resistor will change by approximately ±0.0012 Ohms per °C. Across the full -55°C to 155°C range (210°C span), maximum resistance variation is approximately ±0.252 Ohms or ±2.1% of nominal value. All substitute parts maintain identical temperature coefficient, ensuring equivalent thermal stability.

Q: Is REACH compliance status identical across all substitute parts?

A: Yes. All listed substitute parts maintain REACH Unaffected status, matching the RC2012F120CS. REACH Unaffected classification indicates the component does not contain substances of very high concern (SVHC) requiring declaration or authorization under REACH regulations.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message