RC2012F11R8CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F11R8CS is a 11.8 Ohm ±1% 0.125W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0805 (2012 Metric) package format. This component is classified as Active product status and is RoHS3 compliant with MSL Level 1 rating. Substitute parts are identified when equivalent electrical specifications, mechanical dimensions, and compliance certifications align with the original component, enabling direct replacement in circuit applications without design modification.

Substiute Parts

RC2012F11R8CS

Samsung Electro-MechanicsIn Stock: 967RC2012F11R8CS Datasheet

Current PartRFQ

RC0805FR-0711R8L

YAGEOIn Stock: 12679RC0805FR-0711R8L Datasheet

DirectRFQ

CRCW080511R8FKEA

Vishay DaleIn Stock: 21029CRCW080511R8FKEA Datasheet

SimilarRFQ

ERJ-6ENF11R8V

Panasonic Electronic ComponentsIn Stock: 62922ERJ-6ENF11R8V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC2012F11R8CS are qualified based on the following criteria:

Electrical Parameters (Critical):

• Resistance value: 11.8 Ohms
• Tolerance: ±1%
• Power rating: 0.125W (1/8W)
• Temperature coefficient: ±100ppm/°C
• Operating temperature range: -55°C ~ 155°C

Mechanical Parameters (Critical):

• Package type: 0805 (2012 Metric)
• Physical dimensions: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Number of terminations: 2

Compliance Parameters (Required):

• RoHS3 compliance
• MSL Level 1 rating
• REACH unaffected status
• ECCN: EAR99

All identified substitute parts meet these criteria and are sourced from active product lines with confirmed inventory availability.

Parameter Comparison

Engineering Selection Recommendations

All three substitute parts (RC0805FR-0711R8L, CRCW080511R8FKEA, ERJ-6ENF11R8V) are functionally equivalent to the RC2012F11R8CS based on electrical and mechanical specifications. Selection among these alternatives is determined by application-specific requirements:

RC0805FR-0711R8L (YAGEO): Direct electrical and mechanical equivalent with moisture-resistant thick film composition. Suitable for general industrial applications requiring standard performance characteristics.

CRCW080511R8FKEA (Vishay Dale): Includes AEC-Q200 automotive qualification rating. Lowest seated height (0.020" / 0.50mm) among substitute options. Appropriate for automotive and high-reliability applications where AEC-Q200 certification is specified.

ERJ-6ENF11R8V (Panasonic): Includes AEC-Q200 automotive qualification rating. Highest seated height (0.028" / 0.70mm) among substitute options. Appropriate for automotive and high-reliability applications where AEC-Q200 certification is specified.

All parts maintain RoHS3 compliance, MSL Level 1 rating, and REACH unaffected status. Selection should account for PCB layout constraints related to component height and application-specific certifications.

Frequently Asked Questions (FAQ)

Q: Can RC0805FR-0711R8L replace RC2012F11R8CS directly?

A: Yes. Both components share identical electrical specifications (11.8 Ohms ±1%, 0.125W), temperature characteristics (±100ppm/°C, -55°C ~ 155°C), and 0805 package dimensions. The seated height difference (0.024" vs 0.026") is within typical PCB assembly tolerances.

Q: What is the difference between CRCW080511R8FKEA and ERJ-6ENF11R8V?

A: Both components are electrically identical and AEC-Q200 qualified. The primary difference is seated height: CRCW080511R8FKEA measures 0.020" (0.50mm) while ERJ-6ENF11R8V measures 0.028" (0.70mm). Selection depends on PCB clearance requirements and assembly specifications.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. RC0805FR-0711R8L, CRCW080511R8FKEA, and ERJ-6ENF11R8V are all RoHS3 compliant with MSL Level 1 rating and REACH unaffected status, matching the original RC2012F11R8CS specifications.

Q: Which substitute part should be used for automotive applications?

A: CRCW080511R8FKEA (Vishay Dale) or ERJ-6ENF11R8V (Panasonic) are appropriate for automotive applications, as both carry AEC-Q200 qualification. Selection between these two depends on PCB height constraints.

Q: Is the ±1% tolerance maintained across all substitute parts?

A: Yes. All substitute parts maintain ±1% tolerance specification, ensuring equivalent circuit performance and accuracy in applications requiring this tolerance level.

Q: Can these parts be used interchangeably in existing designs?

A: Yes, provided PCB layout accommodates the seated height variations. All parts are mechanically compatible with 0805 package footprints and electrically equivalent for direct substitution.