RC2012F105CS Equivalent & Substitute Parts Reference

Part Overview

The RC2012F105CS is a 1 MOhm ±1% 0.125W thick film chip resistor in 0805 (2012 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with moisture resistant characteristics and operates across the temperature range of -55°C to 155°C. The part is ROHS3 compliant with MSL 1 (Unlimited) rating, making it suitable for general industrial and consumer applications. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and environmental compliance certifications.

Key Parameters

Parameter	Specification
Resistance Value	1 MOhm
Tolerance	±1%
Power Rating	0.125W (1/8W)
Package / Case	0805 (2012 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C to 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Number of Terminations	2

Substitute Part Grouping Explanation

Substitute parts for the RC2012F105CS are classified into two categories based on functional equivalence and application suitability:

Direct Substitutes share identical electrical parameters (1 MOhm ±1%, 0.125W, ±100ppm/°C, -55°C to 155°C operating range) and mechanical compatibility (0805 package, 2-termination configuration). These parts are interchangeable at the circuit level and differ only in manufacturer, series designation, packaging format (Tape & Reel vs. Cut Tape), and optional feature sets such as moisture resistance or automotive qualification.

Similar Parts maintain all core electrical and thermal specifications but include additional certifications or enhanced features (such as AEC-Q200 automotive qualification) that extend application scope beyond the original part's capabilities. These parts are suitable for designs requiring higher reliability standards or specific industry compliance.

The substitution logic is strictly based on the following matching criteria:

Resistance value: 1 MOhm
Tolerance: ±1%
Power rating: 0.125W
Package: 0805 (2012 Metric)
Temperature coefficient: ±100ppm/°C
Operating temperature: -55°C to 155°C
Composition: Thick Film
Terminations: 2
RoHS compliance: ROHS3

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Op. Temp Range (°C)	Package	Height Max (mm)	Features	Packaging Type
RC2012F105CS	Samsung Electro-Mechanics	1 MOhm	±1%	0.125	±100	-55 to 155	0805	0.65	Moisture Resistant	Tape & Reel
CR0805-FX-1004ELF	Bourns Inc.	1 MOhm	±1%	0.125	±100	-55 to 155	0805	0.60	Moisture Resistant	Tape & Reel
CRG0805F1M0	TE Connectivity Passive Product	1 MOhm	±1%	0.125	±100	-55 to 155	0805	0.65	Standard	Tape & Reel
ERJ-6ENF1004V	Panasonic Electronic Components	1 MOhm	±1%	0.125	±100	-55 to 155	0805	0.70	Automotive AEC-Q200	Cut Tape & Digi-Reel
KTR10EZPF1004	Rohm Semiconductor	1 MOhm	±1%	0.125	±100	-55 to 155	0805	0.65	Automotive AEC-Q200, High Voltage	Tape & Reel
RC0805FR-071ML	YAGEO	1 MOhm	±1%	0.125	±100	-55 to 155	0805	0.60	Moisture Resistant	Cut Tape & Digi-Reel
RCG08051M00FKEA	Vishay Dale	1 MOhm	±1%	0.125	±100	-55 to 155	0805	0.50	Standard	Tape & Reel
RCV08051M00FKEA	Vishay Dale	1 MOhm	±1%	0.125	±100	-55 to 155	0805	0.50	High Voltage	Tape & Reel
RMCF0805FG1M00	Stackpole Electronics Inc	1 MOhm	±1%	0.125	±100	-55 to 155	0805	0.65	Automotive AEC-Q200	Cut Tape
RMCF0805FT1M00	Stackpole Electronics Inc	1 MOhm	±1%	0.125	±100	-55 to 155	0805	0.65	Automotive AEC-Q200	Tape & Reel
AC0805FR-071ML	YAGEO	1 MOhm	±1%	0.125	±100	-55 to 155	0805	0.60	Automotive AEC-Q200, Moisture Resistant	Tape & Reel

Engineering Selection Recommendations

All listed substitute parts maintain full electrical and thermal compatibility with the RC2012F105CS. Selection among equivalent parts should be based on the following criteria:

For Standard Industrial Applications: CR0805-FX-1004ELF (Bourns), RC0805FR-071ML (YAGEO), or CRG0805F1M0 (TE Connectivity) are suitable direct replacements. These parts share identical electrical specifications and moisture resistant characteristics where applicable. Packaging format (Tape & Reel vs. Cut Tape) should be selected based on assembly process requirements.

For Automotive Applications: ERJ-6ENF1004V (Panasonic), KTR10EZPF1004 (Rohm), RMCF0805FG1M00 (Stackpole Cut Tape), RMCF0805FT1M00 (Stackpole Tape & Reel), or AC0805FR-071ML (YAGEO) are qualified to AEC-Q200 automotive standards. These parts are suitable for designs requiring automotive-grade reliability and traceability.

For High Voltage Applications: KTR10EZPF1004 (Rohm) and RCV08051M00FKEA (Vishay Dale) include high voltage specifications in addition to standard electrical parameters.

For Space-Constrained Designs: RCG08051M00FKEA (Vishay Dale) and RCV08051M00FKEA (Vishay Dale) offer reduced height profiles (0.50mm seated height) compared to the original part (0.65mm), enabling compact PCB layouts where vertical clearance is limited.

All substitute parts are ROHS3 compliant with MSL 1 (Unlimited) rating, matching the environmental compliance profile of the original RC2012F105CS.

Frequently Asked Questions (FAQ)

Q: Can I substitute the RC2012F105CS with any of the listed parts without circuit redesign?

A: Yes. All direct substitute parts listed maintain identical electrical specifications (1 MOhm ±1%, 0.125W, ±100ppm/°C) and operate across the same temperature range (-55°C to 155°C). Physical dimensions and termination configuration are identical, enabling direct PCB footprint compatibility. No circuit redesign is required.

Q: What is the difference between "Direct Substitutes" and "Similar Parts"?

A: Direct substitutes share all core electrical and mechanical specifications with the RC2012F105CS. Similar parts (such as AC0805FR-071ML) include additional certifications or features (automotive AEC-Q200 qualification) that extend application scope. Similar parts are functionally compatible but may include enhanced reliability characteristics suitable for specialized applications.

Q: Does packaging format (Tape & Reel vs. Cut Tape) affect electrical performance?

A: No. Packaging format affects only handling, storage, and assembly logistics. Electrical specifications, thermal performance, and reliability characteristics are identical regardless of packaging type. Selection should be based on assembly equipment compatibility and supply chain requirements.

Q: Are moisture resistant variants (CR0805-FX-1004ELF, RC0805FR-071ML, AC0805FR-071ML) required for all applications?

A: Moisture resistant variants provide enhanced protection in high-humidity environments or applications with extended storage periods. For standard indoor industrial applications with controlled storage conditions, standard variants (CRG0805F1M0, RCG08051M00FKEA) are functionally equivalent. Application environment should determine selection.

Q: Can I use automotive-qualified parts (ERJ-6ENF1004V, KTR10EZPF1004, RMCF series, AC0805FR-071ML) in non-automotive applications?

A: Yes. Automotive-qualified parts exceed the reliability and traceability requirements of standard industrial applications. They are fully compatible with non-automotive designs and provide enhanced quality assurance. No technical restrictions prevent their use in general applications.

Q: What is the significance of the height difference (0.50mm to 0.70mm) among substitute parts?

A: Height variation reflects manufacturing process differences among suppliers. All parts remain within the 0805 package specification. Height differences are significant only in space-constrained designs with minimal vertical clearance. For standard PCB layouts, height variation is not a limiting factor.

Q: Are all substitute parts available in the same quantities as the RC2012F105CS?

A: No. Inventory levels vary by manufacturer and distributor. RMCF0805FT1M00 (Stackpole) shows the highest inventory (888,228 pcs), while RC0805FR-071ML (YAGEO) shows lower availability (2,400 pcs). Supply chain requirements should be evaluated during part selection.

Q: Do I need to update my bill of materials (BOM) if I substitute parts?

A: Yes. Each substitute part has a unique manufacturer part number and should be recorded in the BOM with its corresponding manufacturer designation. This maintains traceability and ensures procurement accuracy. However, the functional circuit behavior remains unchanged.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message