RC1608J330CS Equivalent & Substitute Parts Reference

Part Overview

The RC1608J330CS is a 33 Ohm ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0603 (1608 Metric) package format with 0.1W power rating. This component is classified as Active product status with moisture-resistant characteristics and unlimited moisture sensitivity level (MSL 1). The RC1608J330CS serves in general-purpose SMD applications requiring standard tolerance resistive elements. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical compatibility, and regulatory compliance to support component procurement flexibility and supply chain continuity.

Key Parameters

Parameter	Value	Specification Basis
Resistance Value	33 Ohms	Core electrical specification
Tolerance	±5%	Acceptable tolerance range for substitution
Power Rating	0.1W (1/10W)	Thermal dissipation capability
Package / Case	0603 (1608 Metric)	Physical footprint and mounting compatibility
Composition	Thick Film	Manufacturing technology
Operating Temperature Range	-55°C ~ 155°C	Environmental operating limits
Temperature Coefficient	±100ppm/°C	Resistance stability over temperature
RoHS Status	ROHS3 Compliant	Regulatory compliance requirement
Moisture Sensitivity Level	1 (Unlimited)	Handling and storage requirements

Substitute Part Grouping Explanation

Substitute parts for the RC1608J330CS are classified into three categories based on substitution relationship and parameter alignment:

Direct Substitutes (Equivalent Electrical & Mechanical Parameters) Direct substitutes maintain identical or superior specifications across all critical parameters: 33 Ohm resistance, ±5% tolerance, 0.1W power rating, 0603 package, thick film composition, -55°C to 155°C operating range, and ROHS3 compliance. These parts are interchangeable without circuit redesign or performance degradation.

Upgrade Substitutes (Enhanced Tolerance or Features) Upgrade substitutes offer tighter tolerance (±1% vs ±5%), automotive AEC-Q200 qualification, or enhanced temperature coefficient specifications while maintaining the same resistance value, power rating, package format, and operating temperature range. These parts provide improved performance characteristics suitable for applications requiring higher precision or automotive-grade reliability.

Similar Parts (Matching Core Specifications with Additional Features) Similar parts match the core electrical specifications (33 Ohms, ±5%, 0.1W, 0603 package) and add automotive AEC-Q200 qualification or moisture-resistant features while maintaining ROHS3 compliance and operating temperature range.

Critical Substitution Parameters:

Resistance Value: 33 Ohms (exact match required)
Tolerance: ±5% minimum acceptable (±1% acceptable as upgrade)
Power Rating: 0.1W minimum required
Package: 0603 (1608 Metric) mandatory for PCB compatibility
Operating Temperature: -55°C to 155°C minimum required range
RoHS Status: ROHS3 Compliant required
Composition: Thick Film technology

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Op Temp Range	Features	Packaging	RoHS Status
RC1608J330CS	Samsung Electro-Mechanics	33 Ω	±5%	0.1	±100	-55 to 155°C	Moisture Resistant	Tape & Reel	ROHS3
RC0603JR-0733RL	YAGEO	33 Ω	±5%	0.1	±100	-55 to 155°C	Moisture Resistant	Cut Tape & Digi-Reel	ROHS3
RMCF0603FT33R0	Stackpole Electronics Inc	33 Ω	±1%	0.1	±100	-55 to 155°C	Automotive AEC-Q200	Tape & Reel	ROHS3
CRG0603J33R	TE Connectivity Passive Product	33 Ω	±5%	0.1	±200	-55 to 155°C	None specified	Tape & Reel	ROHS3
CRG0603F33R	TE Connectivity Passive Product	33 Ω	±1%	0.1	±200	-55 to 155°C	None specified	Tape & Reel	ROHS3
ERJ-3EKF33R0V	Panasonic Electronic Components	33 Ω	±1%	0.1	±100	-55 to 155°C	Automotive AEC-Q200	Cut Tape & Digi-Reel	ROHS3
ERJ-3GEYJ330V	Panasonic Electronic Components	33 Ω	±5%	0.1	±200	-55 to 155°C	Automotive AEC-Q200	Tape & Reel	ROHS3
KTR03EZPF33R0	Rohm Semiconductor	33 Ω	±1%	0.1	±100	-55 to 155°C	Automotive AEC-Q200, High Voltage	Tape & Reel	ROHS3
RC0603FR-0733RL	YAGEO	33 Ω	±1%	0.1	±100	-55 to 155°C	Moisture Resistant	Cut Tape & Digi-Reel	ROHS3
RMCF0603JG33R0	Stackpole Electronics Inc	33 Ω	±5%	0.1	±200	-55 to 155°C	Automotive AEC-Q200	Cut Tape	ROHS3
AC0603JR-0733RL	YAGEO	33 Ω	±5%	0.1	±100	-55 to 155°C	Automotive AEC-Q200, Moisture Resistant	Tape & Reel	ROHS3

Engineering Selection Recommendations

Direct Substitution (No Circuit Modification Required)

RC0603JR-0733RL (YAGEO) serves as the primary direct substitute for RC1608J330CS. Both parts maintain identical electrical specifications (33 Ohms ±5%, 0.1W), matching temperature coefficient (±100ppm/°C), operating temperature range (-55°C to 155°C), and ROHS3 compliance. The primary difference is packaging format: RC0603JR-0733RL is supplied in Cut Tape & Digi-Reel format versus Tape & Reel for the original part. This substitution is suitable for applications where packaging format flexibility is acceptable.

AC0603JR-0733RL (YAGEO) provides direct electrical equivalence with the addition of automotive AEC-Q200 qualification and moisture-resistant features. This part maintains ±5% tolerance, 0.1W power rating, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range. Selection of this part is appropriate for applications requiring automotive-grade reliability without circuit redesign.

Upgrade Substitution (Enhanced Performance)

RC0603FR-0733RL (YAGEO) offers tighter tolerance specification (±1% vs ±5%) while maintaining all other critical parameters: 33 Ohms, 0.1W power rating, ±100ppm/°C temperature coefficient, -55°C to 155°C operating range, moisture-resistant features, and ROHS3 compliance. This upgrade is suitable for precision applications where tolerance improvement enhances circuit performance.

ERJ-3EKF33R0V (Panasonic Electronic Components) provides ±1% tolerance with automotive AEC-Q200 qualification, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range. This part is selected for automotive applications requiring higher precision and AEC-Q200 reliability standards.

RMCF0603FT33R0 (Stackpole Electronics Inc) combines ±1% tolerance with automotive AEC-Q200 qualification and ±100ppm/°C temperature coefficient. This part is appropriate for automotive-grade applications requiring enhanced tolerance performance.

KTR03EZPF33R0 (Rohm Semiconductor) provides ±1% tolerance, automotive AEC-Q200 qualification, high voltage capability, and ±100ppm/°C temperature coefficient. Selection is appropriate for high-voltage automotive applications requiring precision resistive elements.

Packaging Considerations

Tape & Reel packaging (original RC1608J330CS format) is standard for high-volume automated assembly. Cut Tape & Digi-Reel alternatives (RC0603JR-0733RL, ERJ-3EKF33R0V, RC0603FR-0733RL) are suitable for lower-volume or mixed-component procurement scenarios. Cut Tape format (RMCF0603JG33R0) is appropriate for manual or semi-automated assembly processes.

Compliance and Certification

All listed substitute parts maintain ROHS3 compliance and REACH Unaffected status, matching the regulatory requirements of the original RC1608J330CS. Parts with automotive AEC-Q200 qualification (RMCF0603FT33R0, ERJ-3EKF33R0V, ERJ-3GEYJ330V, RMCF0603JG33R0, AC0603JR-0733RL, KTR03EZPF33R0) are suitable for automotive applications requiring supplier qualification documentation.

Frequently Asked Questions (FAQ)

Q: Can RC0603JR-0733RL replace RC1608J330CS in my circuit?

A: Yes. RC0603JR-0733RL is a direct electrical equivalent with identical resistance (33 Ohms), tolerance (±5%), power rating (0.1W), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C to 155°C). The primary difference is packaging format (Cut Tape & Digi-Reel vs Tape & Reel). Both parts are ROHS3 compliant and suitable for direct substitution without circuit modification.

Q: What is the difference between ±5% and ±1% tolerance parts?

A: Tolerance specifies the maximum deviation of actual resistance value from the nominal 33 Ohm specification. ±5% tolerance allows resistance values between 31.35 and 34.65 Ohms. ±1% tolerance restricts values to 32.67 and 33.33 Ohms. Applications requiring tighter resistance control or precision circuits benefit from ±1% tolerance parts such as RC0603FR-0733RL, ERJ-3EKF33R0V, or RMCF0603FT33R0.

Q: Are automotive AEC-Q200 qualified parts suitable for non-automotive applications?

A: Yes. Automotive AEC-Q200 qualified parts (RMCF0603FT33R0, ERJ-3EKF33R0V, ERJ-3GEYJ330V, RMCF0603JG33R0, AC0603JR-0733RL, KTR03EZPF33R0) meet enhanced reliability and qualification standards. These parts are suitable for any application and provide additional assurance of manufacturing quality and consistency. Selection is not restricted to automotive use.

Q: What does MSL 1 (Unlimited) moisture sensitivity level mean?

A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. The RC1608J330CS and all listed substitute parts carry MSL 1 classification, eliminating moisture-related handling constraints and simplifying inventory management.

Q: Can I use CRG0603F33R (±1% tolerance) as a direct replacement for RC1608J330CS (±5% tolerance)?

A: Yes, from an electrical standpoint. CRG0603F33R provides tighter tolerance (±1%), matching resistance value (33 Ohms), power rating (0.1W), and operating temperature range (-55°C to 155°C). However, the temperature coefficient differs (±200ppm/°C vs ±100ppm/°C). This substitution is suitable for applications where the higher temperature coefficient is acceptable. Verify circuit performance requirements before selection.

Q: What is the difference between Tape & Reel and Cut Tape & Digi-Reel packaging?

A: Tape & Reel packaging supplies components on continuous carrier tape wound on reels, optimized for high-volume automated pick-and-place assembly. Cut Tape & Digi-Reel supplies components on cut tape segments with reel options, suitable for lower-volume orders or mixed-component procurement. Both formats contain identical components; packaging selection depends on assembly volume and procurement strategy.

Q: Are all substitute parts ROHS3 compliant?

A: Yes. All listed substitute parts (RC0603JR-0733RL, RMCF0603FT33R0, CRG0603J33R, CRG0603F33R, ERJ-3EKF33R0V, ERJ-3GEYJ330V, KTR03EZPF33R0, RC0603FR-0733RL, RMCF0603JG33R0, AC0603JR-0733RL) maintain ROHS3 compliance matching the original RC1608J330CS specification.

Q: Which substitute part offers the best overall performance upgrade?

A: Selection depends on application requirements. For precision applications, RC0603FR-0733RL or ERJ-3EKF33R0V provide ±1% tolerance with ±100ppm/°C temperature coefficient. For automotive applications, RMCF0603FT33R0, ERJ-3EKF33R0V, or KTR03EZPF33R0 provide AEC-Q200 qualification. For high-voltage automotive applications, KTR03EZPF33R0 combines ±1% tolerance, AEC-Q200 qualification, and high voltage capability.

Q: Can I mix different substitute parts in the same circuit board?

A: Yes. All substitute parts maintain identical core specifications (33 Ohms, 0.1W, 0603 package, -55°C to 155°C operating range, ROHS3 compliance). Mixing parts with different tolerances (±5% vs ±1%) or temperature coefficients (±100ppm/°C vs ±200ppm/°C) is acceptable provided circuit design accounts for the resulting tolerance stack-up and temperature performance variation.

Q: What is the temperature coefficient and why does it matter?

A: Temperature coefficient (ppm/°C) specifies how resistance value changes with temperature. RC1608J330CS has ±100ppm/°C, meaning resistance can shift approximately 0.01% per degree Celsius. Parts with ±200ppm/°C (CRG0603J33R, CRG0603F33R, ERJ-3GEYJ330V, RMCF0603JG33R0) experience twice the temperature-induced resistance variation. Applications with wide operating temperature ranges or precision requirements benefit from lower temperature coefficient specifications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message