RC1608J303CS 30kΩ 0603 Chip Resistor Equivalent & Substitute Parts

Part Overview

The RC1608J303CS is a 30 kOhms ±5% 0.1W thick film chip resistor in 0603 (1608 Metric) package manufactured by Samsung Electro-Mechanics. This component is classified as Active product status with 814 pieces currently in stock. The part is moisture resistant, ROHS3 compliant, and operates across -55°C to 155°C temperature range with MSL 1 rating.

Equivalent and substitute parts are necessary when the original manufacturer part becomes unavailable, when design requirements shift toward higher tolerance specifications, when automotive-grade qualification is required, or when alternative packaging formats better suit production workflows.

Key Parameters

Parameter	Value
Resistance	30 kOhms
Tolerance	±5%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
Moisture Sensitivity Level	1 (Unlimited)
RoHS Status	ROHS3 Compliant
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution eligibility for the RC1608J303CS is determined by strict alignment with the following core parameters:

Mandatory Matching Parameters:

Resistance value: 30 kOhms (exact match required)
Power rating: 0.1W / 1/10W (exact match required)
Package: 0603 (1608 Metric) (exact match required)
Composition: Thick Film (exact match required)
Operating temperature range: -55°C ~ 155°C minimum (equal or wider range acceptable)
Termination count: 2 (exact match required)
RoHS compliance: ROHS3 (exact match required)

Allowable Variation Parameters:

Tolerance: ±5% (baseline); ±1% represents upgrade specification
Temperature coefficient: ±100ppm/°C (baseline); ±200ppm/°C acceptable within tolerance limits
Moisture resistance features: baseline or enhanced (automotive AEC-Q200 qualification acceptable)
Packaging format: Cut Tape (CT), Digi-Reel®, or Tape & Reel (TR) formats interchangeable
Manufacturer: different manufacturers acceptable if all parameters align

Substitution Categories:

Direct Equivalents maintain identical electrical specifications and baseline features. These parts are pin-for-pin compatible with no design modifications required.

Upgrade Substitutes improve upon baseline specifications while maintaining full backward compatibility. Tolerance upgrades from ±5% to ±1% and automotive AEC-Q200 qualification represent performance enhancements without functional compromise.

Similar Parts share core electrical specifications but introduce additional features such as automotive qualification or enhanced moisture resistance. These require design review confirmation but remain functionally compatible.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power	Temp Coeff	Temp Range	Features	Status
RC1608J303CS	Samsung Electro-Mechanics	30 kΩ	±5%	0.1W	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active
RC0603JR-0730KL	YAGEO	30 kΩ	±5%	0.1W	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active
RMCF0603JT30K0	Stackpole Electronics Inc	30 kΩ	±5%	0.1W	±200ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Active
ERJ-3EKF3002V	Panasonic Electronic Components	30 kΩ	±1%	0.1W	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Active
ERJ-3GEYJ303V	Panasonic Electronic Components	30 kΩ	±5%	0.1W	±200ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Active
KTR03EZPF3002	Rohm Semiconductor	30 kΩ	±1%	0.1W	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, High Voltage	Active
MCR03ERTJ303	Rohm Semiconductor	30 kΩ	±5%	0.1W	±200ppm/°C	-55°C ~ 155°C	Standard	Discontinued at DiGi Electronics
RC0603FR-0730KL	YAGEO	30 kΩ	±1%	0.1W	±100ppm/°C	-55°C ~ 155°C	Moisture Resistant	Active
RMCF0603FT30K0	Stackpole Electronics Inc	30 kΩ	±1%	0.1W	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Active
RMCF0603JG30K0	Stackpole Electronics Inc	30 kΩ	±5%	0.1W	±200ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Active
AC0603JR-0730KL	YAGEO	30 kΩ	±5%	0.1W	±100ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, Moisture Resistant	Active

Engineering Selection Recommendations

For Direct Replacement (No Design Changes Required):

RC0603JR-0730KL (YAGEO) serves as the primary direct equivalent. This part maintains identical electrical specifications (30 kΩ ±5%, 0.1W, ±100ppm/°C) and moisture resistant composition. With 505,682 pieces in stock, supply continuity is assured. Both Cut Tape and Digi-Reel packaging options are available, supporting flexible procurement workflows.

For Tolerance-Critical Applications (±1% Specification):

RC0603FR-0730KL (YAGEO) and RMCF0603FT30K0 (Stackpole Electronics Inc) both upgrade tolerance to ±1% while maintaining the 0.1W power rating and -55°C to 155°C operating range. RC0603FR-0730KL preserves moisture resistant features identical to the original part. RMCF0603FT30K0 adds automotive AEC-Q200 qualification with ±100ppm/°C temperature coefficient. Both are Active status with substantial inventory (85,200 and 146,875 pieces respectively).

For Automotive Applications (AEC-Q200 Requirement):

RMCF0603JG30K0 (Stackpole Electronics Inc) maintains ±5% tolerance matching the original specification while adding AEC-Q200 automotive qualification. Temperature coefficient increases to ±200ppm/°C, which remains within acceptable operational limits for non-precision applications. 11,038 pieces in stock.

ERJ-3GEYJ303V (Panasonic Electronic Components) provides AEC-Q200 qualification with ±5% tolerance and ±200ppm/°C temperature coefficient. 326,468 pieces available.

For High-Precision Automotive Applications (±1% + AEC-Q200):

ERJ-3EKF3002V (Panasonic Electronic Components) combines ±1% tolerance upgrade with AEC-Q200 automotive qualification and ±100ppm/°C temperature coefficient. 247,186 pieces in stock.

RMCF0603FT30K0 (Stackpole Electronics Inc) offers identical ±1% tolerance with AEC-Q200 qualification and ±100ppm/°C temperature coefficient. 146,875 pieces available.

KTR03EZPF3002 (Rohm Semiconductor) provides ±1% tolerance, AEC-Q200 qualification, ±100ppm/°C temperature coefficient, and high voltage capability. 5,394 pieces in stock.

Parts to Avoid:

MCR03ERTJ303 (Rohm Semiconductor) is discontinued at DiGi Electronics and should not be selected for new designs despite 896 pieces remaining in inventory.

Frequently Asked Questions (FAQ)

Q: Can RC0603JR-0730KL replace RC1608J303CS without any circuit modifications?

A: Yes. RC0603JR-0730KL is a direct equivalent with identical resistance (30 kΩ), tolerance (±5%), power rating (0.1W), package (0603), temperature range (-55°C to 155°C), and composition (thick film). No design changes are required.

Q: What is the difference between ±5% and ±1% tolerance specifications?

A: Tolerance defines the maximum allowable deviation from the nominal resistance value. A ±5% tolerance on a 30 kΩ resistor allows values between 28.5 kΩ and 31.5 kΩ. A ±1% tolerance restricts the range to 29.7 kΩ and 30.3 kΩ. Applications requiring tighter resistance control benefit from ±1% parts, though most general-purpose circuits function identically with either specification.

Q: What does AEC-Q200 automotive qualification mean?

A: AEC-Q200 is an automotive industry standard qualification that certifies components for use in automotive applications. It includes enhanced reliability testing, temperature cycling, and failure rate validation. Parts with AEC-Q200 qualification are suitable for automotive and harsh-environment applications but function identically to non-qualified parts in standard applications.

Q: Are Cut Tape (CT) and Tape & Reel (TR) packages interchangeable?

A: Both packaging formats contain identical components. Cut Tape is suitable for manual assembly and small-volume production. Tape & Reel format is optimized for automated pick-and-place assembly equipment. Selection depends on production methodology, not electrical performance.

Q: Can I use a ±1% tolerance part as a substitute for a ±5% specification?

A: Yes. A ±1% tolerance part is a performance upgrade that maintains full backward compatibility. Any circuit designed for ±5% tolerance will function identically or better with a ±1% substitute. The reverse substitution (±5% for ±1%) is not recommended for precision-critical applications.

Q: What is the significance of temperature coefficient (ppm/°C)?

A: Temperature coefficient measures how much the resistance value changes with temperature. A ±100ppm/°C specification means the resistance changes by 0.01% per degree Celsius. Lower temperature coefficients provide better stability across temperature extremes. For most applications, both ±100ppm/°C and ±200ppm/°C specifications are functionally equivalent.

Q: Why do some substitutes have higher temperature coefficients?

A: Different manufacturing processes and materials result in different temperature stability characteristics. Automotive-grade parts (AEC-Q200) sometimes use materials that trade slightly higher temperature coefficients for improved reliability and durability in harsh environments. The difference remains negligible for most circuit applications.

Q: Is moisture resistance a critical parameter for all applications?

A: Moisture resistance becomes critical in high-humidity environments, potted assemblies, or applications with extended storage in humid conditions. Standard thick film resistors without specific moisture resistant designation still function in typical indoor environments. Moisture resistant variants provide additional protection for demanding applications.

Q: What inventory levels should I consider when selecting a substitute?

A: Inventory levels indicate supply availability and long-term sourcing stability. RC0603JR-0730KL (505,682 pieces) and RMCF0603FT30K0 (146,875 pieces) represent high-availability options suitable for production designs. Parts with lower inventory (under 10,000 pieces) may face future availability constraints.

Q: Can I mix different substitute parts within a single design?

A: Yes, provided all parts meet the circuit's electrical requirements. Mixing manufacturers and tolerance grades is acceptable from an electrical standpoint. However, design documentation should specify approved part numbers to ensure consistency during manufacturing and future revisions.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message