RC1608J270CS Equivalent & Substitute Parts Reference

Part Overview

The RC1608J270CS is a 27 Ohm ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0603 (1608 Metric) package format with 0.1W power rating. This component is classified as Active product status with moisture-resistant characteristics and unlimited moisture sensitivity level (MSL 1). The part is ROHS3 compliant and REACH unaffected, suitable for general industrial and consumer applications requiring standard tolerance resistive elements.

Equivalent and substitute parts are necessary when the original manufacturer part becomes unavailable, when design requirements shift toward higher reliability standards (such as automotive AEC-Q200 qualification), or when tolerance specifications require tightening from ±5% to ±1% for improved circuit performance.

Key Parameters

Parameter	Value	Substitution Relevance
Resistance Value	27 Ohms	Must match exactly for direct substitution
Tolerance	±5%	Determines circuit accuracy; tighter tolerance (±1%) is acceptable upgrade
Power Rating	0.1W (1/10W)	Must match or exceed; lower power rating is not acceptable
Package / Case	0603 (1608 Metric)	Physical footprint must match for PCB compatibility
Composition	Thick Film	Determines electrical characteristics and temperature behavior
Temperature Coefficient	±100ppm/°C or ±200ppm/°C	Affects stability across operating temperature range
Operating Temperature Range	-55°C ~ 155°C	Must support application environment
Terminations	2	Standard for chip resistors; must remain constant
RoHS Status	ROHS3 Compliant	Regulatory requirement for most markets
MSL Rating	1 (Unlimited)	Indicates moisture sensitivity; lower MSL is acceptable upgrade

Substitute Part Grouping Explanation

Substitution logic for the RC1608J270CS is based on strict electrical and mechanical parameter matching within the following framework:

Primary Substitution Criteria (Must Match):

Resistance value: 27 Ohms (exact match required)
Package format: 0603 (1608 Metric) (exact match required)
Power rating: 0.1W minimum (equal or higher acceptable)
Composition: Thick Film (maintains electrical characteristics)
Number of terminations: 2 (standard configuration)

Secondary Substitution Criteria (Upgradeable):

Tolerance: ±5% baseline; ±1% represents acceptable upgrade for improved accuracy
Temperature coefficient: ±100ppm/°C or ±200ppm/°C both acceptable within operating range
Regulatory compliance: ROHS3 and REACH status maintained across all substitutes
MSL rating: Level 1 (Unlimited) maintained across all substitutes

Qualification Enhancement (Optional):

Automotive AEC-Q200 certification available in upgrade options for applications requiring automotive-grade reliability
High voltage capability available in specific upgrade options

Parts are grouped into three categories: Direct Manufacturer Substitutes (equivalent specifications from alternative manufacturers), Upgrade Options (enhanced specifications such as tighter tolerance or automotive qualification), and Similar Parts (matching core specifications with minor feature variations).

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Package	Features	Product Status
RC1608J270CS	Samsung Electro-Mechanics	27 Ω	±5%	0.1	±100	0603	Moisture Resistant	Active
RC0603JR-0727RL	YAGEO	27 Ω	±5%	0.1	±100	0603	Moisture Resistant	Active
ERJ-3EKF27R0V	Panasonic Electronic Components	27 Ω	±1%	0.1	±100	0603	Automotive AEC-Q200	Active
ERJ-3GEYJ270V	Panasonic Electronic Components	27 Ω	±5%	0.1	±200	0603	Automotive AEC-Q200	Active
KTR03EZPF27R0	Rohm Semiconductor	27 Ω	±1%	0.1	±100	0603	Automotive AEC-Q200, High Voltage	Active
MCR03ERTJ270	Rohm Semiconductor	27 Ω	±5%	0.1	±200	0603	Standard	Discontinued at DiGi Electronics
RC0603FR-0727RL	YAGEO	27 Ω	±1%	0.1	±100	0603	Moisture Resistant	Active
RMCF0603FT27R0	Stackpole Electronics Inc	27 Ω	±1%	0.1	±100	0603	Automotive AEC-Q200	Active
RMCF0603JT27R0	Stackpole Electronics Inc	27 Ω	±5%	0.1	±200	0603	Automotive AEC-Q200	Active
AC0603JR-0727RL	YAGEO	27 Ω	±5%	0.1	±100	0603	Automotive AEC-Q200, Moisture Resistant	Active

Engineering Selection Recommendations

Direct Equivalent Selection (RC0603JR-0727RL): YAGEO RC0603JR-0727RL provides direct electrical and mechanical equivalence to RC1608J270CS with identical resistance, tolerance, power rating, and temperature coefficient specifications. Both parts maintain ROHS3 compliance and unlimited MSL rating. This substitute is recommended for applications where the original Samsung part becomes unavailable and no enhanced specifications are required. High inventory availability (583,054 pcs) ensures supply continuity.

Tolerance Upgrade Selection (RC0603FR-0727RL, ERJ-3EKF27R0V, RMCF0603FT27R0, KTR03EZPF27R0): These parts upgrade tolerance from ±5% to ±1%, providing improved circuit accuracy without changing package, power rating, or operating temperature range. All maintain ROHS3 compliance. Selection among these options depends on additional qualification requirements: ERJ-3EKF27R0V and RMCF0603FT27R0 include automotive AEC-Q200 certification; KTR03EZPF27R0 adds high voltage capability. RC0603FR-0727RL provides tolerance upgrade with moisture-resistant features matching the original part's characteristics.

Automotive-Grade Selection (ERJ-3GEYJ270V, AC0603JR-0727RL, RMCF0603JT27R0): These parts maintain ±5% tolerance while adding automotive AEC-Q200 qualification. ERJ-3GEYJ270V and RMCF0603JT27R0 feature ±200ppm/°C temperature coefficient; AC0603JR-0727RL maintains ±100ppm/°C with added moisture-resistant features. Selection is appropriate for automotive applications or designs requiring enhanced reliability standards.

Discontinued Part Avoidance (MCR03ERTJ270): MCR03ERTJ270 is marked as discontinued at DiGi Electronics and should not be selected for new designs despite meeting electrical specifications. This part is listed for reference only in legacy design documentation.

Frequently Asked Questions (FAQ)

Q: Can RC0603JR-0727RL directly replace RC1608J270CS without circuit redesign?

A: Yes. RC0603JR-0727RL matches all critical parameters: 27 Ohm resistance, ±5% tolerance, 0.1W power rating, 0603 package, ±100ppm/°C temperature coefficient, and -55°C to 155°C operating range. Both parts are ROHS3 compliant with MSL 1 rating. No circuit redesign is required.

Q: What is the advantage of upgrading to ±1% tolerance parts?

A: Tolerance upgrade from ±5% to ±1% reduces resistor value variation, improving circuit accuracy and performance in applications sensitive to component tolerances. The upgrade does not change package size, power rating, or thermal characteristics. Upgrade is optional and depends on circuit requirements.

Q: Are automotive AEC-Q200 qualified parts compatible with non-automotive applications?

A: Yes. Automotive AEC-Q200 qualification represents enhanced reliability testing and quality standards. Parts meeting AEC-Q200 are fully compatible with non-automotive applications and provide equivalent or superior performance compared to standard-grade parts with identical electrical specifications.

Q: Does package size differ between 0603 and 1608 Metric designations?

A: No. 0603 and 1608 Metric are equivalent designations for the same physical package: 0.063" L × 0.031" W (1.60mm × 0.80mm). All substitute parts listed use this identical package format and are PCB-compatible with RC1608J270CS.

Q: What is the difference between ±100ppm/°C and ±200ppm/°C temperature coefficients?

A: Temperature coefficient indicates resistance value change per degree Celsius across the operating range. ±100ppm/°C represents tighter temperature stability compared to ±200ppm/°C. Selection depends on application requirements; both values are acceptable within the -55°C to 155°C operating range specified for all parts.

Q: Can parts with higher power ratings substitute for 0.1W specification?

A: Substitution with higher power ratings is acceptable from an electrical standpoint; however, all listed substitutes maintain 0.1W rating matching the original specification. Higher power ratings would increase physical package size, making them incompatible with 0603 footprints.

Q: Why is MCR03ERTJ270 listed if it is discontinued?

A: MCR03ERTJ270 is included for reference in legacy design documentation and reverse-engineering applications. For new designs, select from active-status alternatives. Discontinued status indicates unavailability for procurement and should not be selected for production designs.

Q: What packaging format differences exist between substitute parts?

A: Substitute parts are available in two packaging formats: Tape & Reel (TR) for automated assembly and Cut Tape (CT) with Digi-Reel® for manual or small-batch applications. Electrical specifications remain identical; packaging selection depends on manufacturing process requirements. All parts maintain 0603 component package format.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message