RC1608J1R8CS Equivalent & Substitute Parts Reference

Part Overview

The RC1608J1R8CS is a 1.8 Ohm ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0603 (1608 Metric) package format with 0.1W power rating. This component is classified as Active product status and is RoHS3 compliant with unlimited moisture sensitivity level (MSL 1). The part is designed for general-purpose applications requiring moisture-resistant thick film construction. Equivalent and substitute parts are identified to provide design flexibility, supply chain alternatives, and performance optimization options based on tolerance, automotive qualification, and feature requirements.

Key Parameters

Parameter	Value	Significance for Substitution
Resistance	1.8 Ohms	Must match exactly for direct substitution
Tolerance	±5%	Determines circuit accuracy requirements; tighter tolerances (±1%) are upgrades
Power Rating	0.1W (1/10W)	Must match or exceed for thermal performance
Package	0603 (1608 Metric)	Physical footprint compatibility; all substitutes use identical package
Composition	Thick Film	Technology type; all substitutes maintain thick film construction
Operating Temperature	-55°C ~ 155°C	Thermal operating range; all substitutes support identical range
RoHS Status	ROHS3 Compliant	Environmental compliance requirement; all substitutes are ROHS3 compliant
Moisture Sensitivity Level	MSL 1 (Unlimited)	Handling and storage requirements; all substitutes maintain MSL 1

Substitute Part Grouping Explanation

Substitution logic is based on strict electrical and mechanical parameter matching. All identified substitute parts maintain the following core compatibility criteria:

Mandatory Matching Parameters:

Resistance value: 1.8 Ohms (exact match)
Package format: 0603 (1608 Metric)
Power rating: 0.1W minimum
Operating temperature range: -55°C ~ 155°C minimum
Composition: Thick film construction
RoHS3 compliance
MSL 1 rating

Tolerance Grouping: Substitutes are categorized into two tolerance classes:

±5% Tolerance Group: Direct equivalents with identical tolerance specification
±1% Tolerance Group: Upgraded alternatives with tighter tolerance for improved circuit accuracy

Feature Differentiation:

Standard moisture-resistant variants (general-purpose applications)
Automotive AEC-Q200 qualified variants (automotive and high-reliability applications)
Current sense and high-voltage feature variants (specialized applications)

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power	Temp Coeff	Operating Temp	Features	AEC-Q200	Inventory
RC1608J1R8CS	Samsung Electro-Mechanics	1.8 Ω	±5%	0.1W	±300ppm/°C	-55°C ~ 155°C	Moisture Resistant	No	787 Pcs
RC0603JR-071R8L	YAGEO	1.8 Ω	±5%	0.1W	±200ppm/°C	-55°C ~ 155°C	Moisture Resistant	No	19,366 Pcs
RMCF0603JT1R80	Stackpole Electronics Inc	1.8 Ω	±5%	0.1W	±200ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Yes	1,479 Pcs
RMCF0603FT1R80	Stackpole Electronics Inc	1.8 Ω	±1%	0.1W	±200ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200	Yes	947,151 Pcs
KTR03EZPF1R80	Rohm Semiconductor	1.8 Ω	±1%	0.1W	±200ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, High Voltage	Yes	5,529 Pcs
ERJ-3RQF1R8V	Panasonic Electronic Components	1.8 Ω	±1%	0.1W	±200ppm/°C	-55°C ~ 155°C	Automotive AEC-Q200, Current Sense	Yes	85,350 Pcs

Engineering Selection Recommendations

For Direct Equivalent Replacement (±5% Tolerance):

RC0603JR-071R8L (YAGEO) serves as a direct functional equivalent to RC1608J1R8CS. Both parts maintain ±5% tolerance, 0.1W power rating, and moisture-resistant thick film construction. YAGEO RC0603JR-071R8L offers improved temperature coefficient performance (±200ppm/°C versus ±300ppm/°C) and higher inventory availability (19,366 units). This part is suitable for general-purpose applications where tolerance and thermal stability requirements match the original specification.

RMCF0603JT1R80 (Stackpole Electronics Inc) provides equivalent electrical performance with automotive AEC-Q200 qualification. This part is appropriate for applications requiring automotive-grade reliability and qualification documentation, while maintaining the ±5% tolerance specification.

For Upgraded Performance (±1% Tolerance):

RMCF0603FT1R80 (Stackpole Electronics Inc) offers ±1% tolerance upgrade with automotive AEC-Q200 qualification and exceptional inventory availability (947,151 units). This part is selected for applications requiring improved circuit accuracy and automotive-grade reliability. Temperature coefficient is improved to ±200ppm/°C.

ERJ-3RQF1R8V (Panasonic Electronic Components) provides ±1% tolerance with automotive AEC-Q200 qualification and current sense feature capability. High inventory availability (85,350 units) supports supply chain continuity. This part is suitable for precision current measurement applications in automotive environments.

KTR03EZPF1R80 (Rohm Semiconductor) delivers ±1% tolerance with automotive AEC-Q200 qualification and high-voltage feature set. This part is specified for high-voltage automotive applications requiring enhanced voltage handling capability.

Compliance and Certification:

All substitute parts maintain RoHS3 compliance, MSL 1 rating, and REACH unaffected status. Automotive-qualified variants (RMCF0603FT1R80, KTR03EZPF1R80, ERJ-3RQF1R8V, RMCF0603JT1R80) carry AEC-Q200 certification for automotive applications. Selection between qualified and non-qualified variants depends on application environment and qualification requirements.

Frequently Asked Questions (FAQ)

Q: Can RMCF0603FT1R80 replace RC1608J1R8CS in any application?

A: RMCF0603FT1R80 is electrically and mechanically compatible with RC1608J1R8CS. The ±1% tolerance is tighter than the original ±5% specification, providing improved accuracy. The part maintains identical 0603 package format, 0.1W power rating, and -55°C ~ 155°C operating temperature range. Automotive AEC-Q200 qualification is an additional feature not present in the original part. Substitution is valid for all applications where the original part was specified.

Q: What is the difference between ±5% and ±1% tolerance variants?

A: Tolerance specification defines the maximum deviation from the nominal 1.8 Ohm resistance value. ±5% tolerance allows resistance values between 1.71 Ohms and 1.89 Ohms. ±1% tolerance restricts values to 1.782 Ohms and 1.818 Ohms. Applications requiring precise resistance values for current sensing, voltage dividers, or feedback networks benefit from ±1% tolerance. General-purpose applications typically accept ±5% tolerance.

Q: Are all substitute parts available in identical 0603 package dimensions?

A: All substitute parts use 0603 (1608 Metric) package format with identical footprint compatibility. Physical dimensions are 0.063" L x 0.031" W (1.60mm x 0.80mm) for most variants. RMCF series parts (RMCF0603FT1R80, RMCF0603JT1R80) specify 0.061" L x 0.031" W (1.55mm x 0.80mm), representing a negligible 0.05mm length difference within standard PCB design tolerances. All parts maintain 0.022" (0.55mm) maximum seated height. Direct PCB footprint substitution is valid for all identified parts.

Q: What does AEC-Q200 qualification mean for automotive applications?

A: AEC-Q200 is the Automotive Electronics Council qualification standard for passive components in automotive environments. Qualified parts (RMCF0603FT1R80, RMCF0603JT1R80, KTR03EZPF1R80, ERJ-3RQF1R8V) undergo enhanced testing for temperature cycling, humidity resistance, and reliability under automotive operating conditions. Selection of AEC-Q200 qualified variants is mandatory for automotive applications requiring compliance documentation and reliability assurance.

Q: Which substitute part offers the best inventory availability?

A: RMCF0603FT1R80 (Stackpole Electronics Inc) provides the highest inventory availability at 947,151 units. This part combines ±1% tolerance upgrade, automotive AEC-Q200 qualification, and exceptional supply chain availability. ERJ-3RQF1R8V (Panasonic) offers secondary availability at 85,350 units with current sense feature capability.

Q: Can I use ERJ-3RQF1R8V for current sensing applications?

A: ERJ-3RQF1R8V is specified with current sense feature capability. The part maintains 1.8 Ohm resistance, ±1% tolerance, and automotive AEC-Q200 qualification suitable for precision current measurement circuits. Current sense applications benefit from the ±1% tolerance specification and automotive-grade reliability. Substitution is valid for current sensing applications where the original RC1608J1R8CS was specified.

Q: What is the temperature coefficient difference between parts?

A: RC1608J1R8CS specifies ±300ppm/°C temperature coefficient. All substitute parts specify ±200ppm/°C, representing improved temperature stability. This means resistance variation with temperature is reduced by approximately 33% in substitute parts. Applications operating across wide temperature ranges (-55°C ~ 155°C) benefit from improved temperature coefficient performance.

Q: Are all parts RoHS3 compliant?

A: All identified substitute parts maintain RoHS3 compliance status. RC1608J1R8CS and all substitute variants are ROHS3 compliant and REACH unaffected. MSL 1 (unlimited) moisture sensitivity level is maintained across all parts, eliminating special handling or storage requirements.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message