Equivalent & Substitute Parts for RC1608J162CS

Part Overview

The RC1608J162CS is a 1.6 kOhms ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0603 (1608 Metric) package format. This component is rated for 0.1W power dissipation with moisture-resistant characteristics and operates across the temperature range of -55°C to 155°C. The part maintains Active product status with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1).

Equivalent and substitute parts are necessary when the original manufacturer part becomes unavailable, when design requirements demand enhanced specifications such as improved tolerance or automotive qualification, or when supply chain optimization requires alternative sourcing from qualified manufacturers.

Key Parameters

Parameter	Value	Criticality for Substitution
Resistance Value	1.6 kOhms	Critical - Must Match Exactly
Tolerance	±5%	Critical - Defines Acceptable Range
Power Rating	0.1W (1/10W)	Critical - Minimum Requirement
Package / Case	0603 (1608 Metric)	Critical - Physical Compatibility
Composition	Thick Film	Important - Performance Characteristics
Operating Temperature Range	-55°C to 155°C	Important - Environmental Suitability
Temperature Coefficient	±100ppm/°C	Important - Stability Specification
RoHS Status	ROHS3 Compliant	Important - Regulatory Compliance
Moisture Sensitivity Level	MSL 1 (Unlimited)	Important - Handling Requirements

Substitute Part Grouping Explanation

Substitution logic for the RC1608J162CS is based on strict electrical and mechanical parameter matching. All substitute parts must satisfy the following mandatory criteria:

Mandatory Matching Parameters:

Resistance value: 1.6 kOhms (exact match)
Package format: 0603 (1608 Metric) (exact match)
Power rating: Minimum 0.1W
Composition: Thick film construction
Operating temperature range: -55°C to 155°C minimum
RoHS3 compliance
MSL 1 rating

Tolerance Consideration: The RC1608J162CS specifies ±5% tolerance. Substitute parts with ±5% tolerance provide direct equivalence. Parts with ±1% tolerance represent upgraded specifications with tighter tolerance bands and are classified as upgrades rather than direct equivalents.

Temperature Coefficient: The RC1608J162CS specifies ±100ppm/°C. Substitute parts with matching or superior (lower) temperature coefficients maintain electrical stability characteristics. Parts with ±200ppm/°C represent acceptable alternatives within the same functional category.

Automotive Qualification: The RC1608J162CS does not carry AEC-Q200 automotive qualification. Substitute parts with AEC-Q200 certification represent enhanced reliability options suitable for automotive applications while maintaining all base electrical specifications.

Parameter Comparison

Part Number	Manufacturer	Resistance	Tolerance	Power	Package	Temp Coeff	Operating Temp	Features	Product Status
RC1608J162CS	Samsung Electro-Mechanics	1.6 kΩ	±5%	0.1W	0603	±100ppm/°C	-55°C to 155°C	Moisture Resistant	Active
RC0603JR-071K6L	YAGEO	1.6 kΩ	±5%	0.1W	0603	±100ppm/°C	-55°C to 155°C	Moisture Resistant	Active
ERJ-3EKF1601V	Panasonic Electronic Components	1.6 kΩ	±1%	0.1W	0603	±100ppm/°C	-55°C to 155°C	Automotive AEC-Q200	Active
ERJ-3GEYJ162V	Panasonic Electronic Components	1.6 kΩ	±5%	0.1W	0603	±200ppm/°C	-55°C to 155°C	Automotive AEC-Q200	Active
KTR03EZPF1601	Rohm Semiconductor	1.6 kΩ	±1%	0.1W	0603	±100ppm/°C	-55°C to 155°C	Automotive AEC-Q200, High Voltage	Active
MCR03ERTJ162	Rohm Semiconductor	1.6 kΩ	±5%	0.1W	0603	±200ppm/°C	-55°C to 155°C	Standard	Discontinued at DiGi Electronics
RC0603FR-071K6L	YAGEO	1.6 kΩ	±1%	0.1W	0603	±100ppm/°C	-55°C to 155°C	Moisture Resistant	Active
RMCF0603FT1K60	Stackpole Electronics Inc	1.6 kΩ	±1%	0.1W	0603	±100ppm/°C	-55°C to 155°C	Automotive AEC-Q200	Active
RMCF0603JT1K60	Stackpole Electronics Inc	1.6 kΩ	±5%	0.1W	0603	±200ppm/°C	-55°C to 155°C	Automotive AEC-Q200	Active
AC0603JR-071K6L	YAGEO	1.6 kΩ	±5%	0.1W	0603	±100ppm/°C	-55°C to 155°C	Automotive AEC-Q200, Moisture Resistant	Active

Engineering Selection Recommendations

Direct Equivalent (Identical Specifications):

RC0603JR-071K6L from YAGEO provides direct functional equivalence to RC1608J162CS. Both parts share identical electrical specifications: 1.6 kOhms ±5% tolerance, 0.1W power rating, ±100ppm/°C temperature coefficient, and moisture-resistant thick film construction. Both maintain Active product status and ROHS3 compliance. This part is suitable for direct substitution in applications where the original Samsung component becomes unavailable.

Upgraded Specifications (Enhanced Tolerance):

RC0603FR-071K6L (YAGEO), ERJ-3EKF1601V (Panasonic), KTR03EZPF1601 (Rohm), and RMCF0603FT1K60 (Stackpole) all provide ±1% tolerance specification compared to the ±5% tolerance of the original part. These upgrades deliver improved accuracy and stability. All four maintain ±100ppm/°C temperature coefficient and -55°C to 155°C operating range. RC0603FR-071K6L retains moisture-resistant characteristics. ERJ-3EKF1601V, KTR03EZPF1601, and RMCF0603FT1K60 carry AEC-Q200 automotive qualification. These parts are suitable when design requirements demand tighter tolerance specifications or automotive-grade reliability.

Automotive-Qualified Alternatives (AEC-Q200):

ERJ-3GEYJ162V (Panasonic), RMCF0603JT1K60 (Stackpole), and AC0603JR-071K6L (YAGEO) provide AEC-Q200 automotive qualification while maintaining ±5% tolerance matching the original specification. ERJ-3GEYJ162V and RMCF0603JT1K60 specify ±200ppm/°C temperature coefficient. AC0603JR-071K6L maintains ±100ppm/°C temperature coefficient and moisture-resistant characteristics. These parts are suitable for automotive applications or when enhanced reliability certification is required.

Discontinued Part (Limited Availability):

MCR03ERTJ162 from Rohm Semiconductor is marked as discontinued at DiGi Electronics. While this part meets the electrical specifications (1.6 kOhms ±5%, 0.1W, 0603 package), its discontinued status limits long-term availability. This part should be avoided for new designs or applications requiring sustained component supply.

Frequently Asked Questions (FAQ)

Q: Can RC0603JR-071K6L directly replace RC1608J162CS without circuit modification?

A: Yes. RC0603JR-071K6L from YAGEO provides direct functional equivalence. Both parts share identical resistance value (1.6 kOhms), tolerance (±5%), power rating (0.1W), package format (0603), temperature coefficient (±100ppm/°C), and operating temperature range (-55°C to 155°C). No circuit modification is required.

Q: What is the difference between ±5% and ±1% tolerance parts?

A: Tolerance defines the acceptable deviation from the nominal resistance value. The RC1608J162CS with ±5% tolerance allows resistance values between 1.52 kOhms and 1.68 kOhms. Parts with ±1% tolerance (such as RC0603FR-071K6L, ERJ-3EKF1601V, KTR03EZPF1601, RMCF0603FT1K60) restrict the range to 1.584 kOhms to 1.616 kOhms, providing superior accuracy. Use ±1% parts when circuit design requires tighter component tolerances.

Q: Are AEC-Q200 qualified parts suitable for non-automotive applications?

A: Yes. AEC-Q200 qualification indicates enhanced reliability testing and quality standards. Parts such as ERJ-3EKF1601V, KTR03EZPF1601, RMCF0603FT1K60, ERJ-3GEYJ162V, RMCF0603JT1K60, and AC0603JR-071K6L with AEC-Q200 certification are fully suitable for non-automotive applications. The automotive qualification represents an upgrade in reliability and does not restrict use in other applications.

Q: What does temperature coefficient ±100ppm/°C versus ±200ppm/°C mean for circuit performance?

A: Temperature coefficient specifies how resistance changes with temperature. A ±100ppm/°C coefficient means the resistance changes by 0.01% per degree Celsius. A ±200ppm/°C coefficient means the resistance changes by 0.02% per degree Celsius. For the RC1608J162CS operating across a 210°C temperature range (-55°C to 155°C), the ±100ppm/°C specification results in maximum resistance drift of approximately 2.1%, while ±200ppm/°C results in approximately 4.2% drift. Use ±100ppm/°C parts when circuit design requires superior temperature stability.

Q: Can I use RMCF0603JT1K60 as a substitute if my application requires AEC-Q200 qualification?

A: Yes. RMCF0603JT1K60 from Stackpole Electronics carries AEC-Q200 automotive qualification and maintains the ±5% tolerance specification of the original RC1608J162CS. The part specifies ±200ppm/°C temperature coefficient compared to the original ±100ppm/°C. This represents an acceptable trade-off when automotive qualification is required and the application can tolerate the higher temperature coefficient.

Q: Why is MCR03ERTJ162 listed as discontinued?

A: MCR03ERTJ162 from Rohm Semiconductor is marked as discontinued at DiGi Electronics, indicating that this distributor no longer actively stocks or supports this part. While the part meets the electrical specifications of RC1608J162CS, its discontinued status creates supply chain risk. For new designs or applications requiring sustained component availability, select from the Active status parts listed in this reference.

Q: What is the significance of moisture-resistant designation?

A: Moisture-resistant thick film construction provides enhanced protection against moisture absorption and environmental degradation. RC1608J162CS, RC0603JR-071K6L, RC0603FR-071K6L, and AC0603JR-071K6L all carry moisture-resistant designation. This feature is beneficial for applications exposed to humid environments or applications requiring extended shelf life. Parts without explicit moisture-resistant designation (such as ERJ-3EKF1601V, KTR03EZPF1601, ERJ-3GEYJ162V, MCR03ERTJ162, RMCF0603FT1K60, RMCF0603JT1K60) maintain MSL 1 rating, indicating unlimited moisture sensitivity level, and are suitable for standard industrial applications.

Q: Are all listed substitute parts available in Tape & Reel packaging?

A: Most substitute parts are available in Tape & Reel (TR) packaging, which is standard for automated assembly. RC0603JR-071K6L, ERJ-3EKF1601V, ERJ-3GEYJ162V, KTR03EZPF1601, RMCF0603FT1K60, RMCF0603JT1K60, and AC0603JR-071K6L are supplied in Tape & Reel format. RC0603FR-071K6L and MCR03ERTJ162 are available in Cut Tape (CT) & Digi-Reel® packaging. Verify packaging format with your supplier to ensure compatibility with your assembly process.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message