Equivalent & Substitute Parts for RC1608J160CS

Part Overview

The RC1608J160CS is a 16 Ohm ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics in 0603 (1608 Metric) package format with 0.1W power rating. This component is classified as Active product status with moisture-resistant characteristics and unlimited moisture sensitivity level (MSL 1). The part is ROHS3 compliant and REACH unaffected, suitable for general industrial and commercial applications operating across -55°C to 155°C temperature range.

Equivalent and substitute parts are necessary when the original manufacturer part becomes unavailable, when design requirements demand enhanced specifications such as improved tolerance or automotive qualification, or when supply chain optimization requires alternative sourcing from qualified manufacturers while maintaining electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Resistance	16 Ohms
Tolerance	±5%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thick Film
Operating Temperature Range	-55°C to 155°C
Temperature Coefficient	±100ppm/°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution compatibility for the RC1608J160CS is determined by strict adherence to the following electrical and mechanical parameters:

Primary Substitution Criteria:

Resistance value: 16 Ohms (exact match required)
Power rating: 0.1W minimum
Package format: 0603 (1608 Metric) with equivalent physical dimensions
Composition: Thick film construction
Operating temperature range: -55°C to 155°C minimum
RoHS3 compliance and REACH unaffected status
Moisture sensitivity level: MSL 1 or equivalent

Tolerance Considerations: Parts with ±5% tolerance are direct equivalents. Parts with ±1% tolerance represent upgraded specifications with tighter tolerance bands and are functionally compatible as direct substitutes with improved accuracy.

Feature Enhancements: Parts with automotive AEC-Q200 qualification represent upgraded variants suitable for automotive applications while maintaining all base electrical specifications. These upgrades do not compromise compatibility with non-automotive designs.

Temperature Coefficient Variations: The main part specifies ±100ppm/°C. Substitute parts with ±200ppm/°C tolerance remain compatible as they operate within the same temperature range and maintain functional performance across the specified operating window.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Package	Features	Product Status
RC1608J160CS	Samsung Electro-Mechanics	16 Ω	±5%	0.1	±100	0603	Moisture Resistant	Active
RC0603JR-0716RL	YAGEO	16 Ω	±5%	0.1	±100	0603	Moisture Resistant	Active
RMCF0603JT16R0	Stackpole Electronics Inc	16 Ω	±5%	0.1	±200	0603	Automotive AEC-Q200	Active
ERJ-3EKF16R0V	Panasonic Electronic Components	16 Ω	±1%	0.1	±100	0603	Automotive AEC-Q200	Active
ERJ-3GEYJ160V	Panasonic Electronic Components	16 Ω	±5%	0.1	±200	0603	Automotive AEC-Q200	Active
MCR03ERTF16R0	Rohm Semiconductor	16 Ω	±1%	0.1	±100	0603	Thick Film	Discontinued at DiGi Electronics
MCR03ERTJ160	Rohm Semiconductor	16 Ω	±5%	0.1	±200	0603	Thick Film	Discontinued at DiGi Electronics
RC0603FR-0716RL	YAGEO	16 Ω	±1%	0.1	±100	0603	Moisture Resistant	Active
RMCF0603FT16R0	Stackpole Electronics Inc	16 Ω	±1%	0.1	±100	0603	Automotive AEC-Q200	Active

Engineering Selection Recommendations

Direct Equivalent (Same Specifications): RC0603JR-0716RL from YAGEO is a direct equivalent to RC1608J160CS, matching all electrical parameters including ±5% tolerance, ±100ppm/°C temperature coefficient, and moisture-resistant thick film composition. Both parts maintain Active product status with identical compliance certifications.

Upgraded Tolerance Option: RC0603FR-0716RL from YAGEO provides improved ±1% tolerance specification while maintaining all other parameters identical to the main part. This upgrade is suitable for applications requiring tighter resistance accuracy without changing any other functional characteristics.

Automotive-Qualified Alternatives: RMCF0603FT16R0 (Stackpole Electronics Inc) and ERJ-3EKF16R0V (Panasonic Electronic Components) both provide AEC-Q200 automotive qualification with ±1% tolerance. These parts are suitable for automotive and industrial applications requiring enhanced reliability standards. RMCF0603FT16R0 maintains ±100ppm/°C temperature coefficient matching the original part.

Automotive-Qualified ±5% Tolerance: ERJ-3GEYJ160V from Panasonic Electronic Components and RMCF0603JT16R0 from Stackpole Electronics Inc provide AEC-Q200 qualification while maintaining ±5% tolerance specification. These parts are appropriate for automotive designs where tolerance requirements match the original specification.

Discontinued Parts: MCR03ERTF16R0 and MCR03ERTJ160 from Rohm Semiconductor are marked as discontinued at DiGi Electronics. While electrically compatible, these parts should not be selected for new designs or long-term supply requirements.

Selection Basis: All recommendations are based strictly on product status (Active preferred), RoHS3 compliance, REACH unaffected status, and provided certifications. Physical dimensions, package format, and operating temperature ranges are identical across all recommended parts.

Frequently Asked Questions (FAQ)

Q: Can RC0603JR-0716RL replace RC1608J160CS in existing designs? A: Yes. RC0603JR-0716RL from YAGEO is a direct equivalent with identical electrical specifications (16 Ohms ±5%, 0.1W, 0603 package, ±100ppm/°C temperature coefficient) and matching compliance certifications. No design modifications are required.

Q: What is the difference between ±5% and ±1% tolerance parts? A: Tolerance specifies the allowable deviation from the nominal 16 Ohm resistance value. ±5% tolerance allows deviation between 15.2 and 16.8 Ohms. ±1% tolerance restricts deviation to 15.84 and 16.16 Ohms. Parts with ±1% tolerance provide tighter accuracy and are compatible as direct substitutes for ±5% applications.

Q: Are automotive AEC-Q200 qualified parts suitable for non-automotive applications? A: Yes. AEC-Q200 qualification represents enhanced reliability and quality standards. Parts such as RMCF0603FT16R0 and ERJ-3EKF16R0V with automotive qualification are fully compatible with non-automotive designs and provide equivalent or superior performance.

Q: What does MSL 1 (Unlimited) moisture sensitivity level mean? A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. All substitute parts listed maintain MSL 1 classification, ensuring identical moisture handling requirements.

Q: Can I use parts with different temperature coefficients interchangeably? A: Yes, within the specified operating range. The main part specifies ±100ppm/°C, while some substitutes specify ±200ppm/°C. Both maintain functional performance across the -55°C to 155°C operating range. Selection depends on application-specific temperature stability requirements.

Q: Why are some parts listed as discontinued? A: MCR03ERTF16R0 and MCR03ERTJ160 from Rohm Semiconductor are marked discontinued at DiGi Electronics, indicating limited future availability. These parts remain electrically compatible but should not be selected for new designs or applications requiring long-term supply assurance.

Q: What is the significance of the 0603 package designation? A: 0603 is the imperial package size designation (1608 Metric equivalent). All listed parts use identical 0603 package format with dimensions 0.063" L x 0.031" W (1.60mm x 0.80mm), ensuring mechanical compatibility with existing PCB layouts and assembly equipment.

Q: Are all substitute parts ROHS3 compliant? A: Yes. All parts listed in this reference maintain ROHS3 compliance and REACH unaffected status, meeting current environmental and regulatory requirements for electronic component manufacturing and use.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message