RC1608J131CS Equivalent & Substitute Parts Reference

Part Overview

The RC1608J131CS is a 130 Ohm ±5% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.1W (1/10W) power dissipation in a 0603 (1608 Metric) surface mount package. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are identified based on matching electrical specifications (resistance value, tolerance, power rating), mechanical compatibility (package size and form factor), and environmental operating parameters. Alternative sources become necessary for supply chain optimization, cost management, or when specific certifications such as AEC-Q200 automotive qualification are required for end-application compliance.

Key Parameters

Parameter	Value
Resistance	130 Ohms
Tolerance	±5%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thick Film
Temperature Coefficient	±100ppm/°C
Operating Temperature Range	-55°C ~ 155°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution logic for the RC1608J131CS is determined by the following critical parameters:

Electrical Equivalence: All substitute parts must maintain 130 Ohms resistance value. Tolerance variations (±5% vs. ±1%) define upgrade or direct equivalent classifications. Parts with ±1% tolerance represent upgraded precision alternatives suitable for applications requiring tighter resistance control.

Mechanical Compatibility: All substitute parts must conform to 0603 (1608 Metric) package dimensions. Physical dimensions (0.063" L x 0.031" W / 1.60mm x 0.80mm) and maximum seated height (0.022" / 0.55mm) ensure PCB footprint compatibility and assembly process alignment.

Thermal and Environmental Parameters: Operating temperature range (-55°C ~ 155°C) and temperature coefficient (±100ppm/°C or ±200ppm/°C) must remain within application requirements. All substitute parts maintain MSL 1 rating and RoHS3 compliance.

Certification and Features: Standard moisture-resistant thick film composition applies to all parts. Automotive AEC-Q200 certification, where present, indicates enhanced reliability qualification for automotive applications but does not prevent use in non-automotive designs.

Packaging Format: Cut Tape (CT) and Tape & Reel (TR) formats are functionally equivalent; selection depends on procurement and assembly workflow requirements.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Package	Temp Coeff (ppm/°C)	Operating Temp (°C)	Features	Packaging
RC1608J131CS	Samsung Electro-Mechanics	130 Ω	±5%	0.1	0603	±100	-55 ~ 155	Moisture Resistant	Cut Tape (CT)
RC1608F131CS	Samsung Electro-Mechanics	130 Ω	±1%	0.1	0603	±100	-55 ~ 155	Moisture Resistant	Cut Tape (CT)
RC0603JR-07130RL	YAGEO	130 Ω	±5%	0.1	0603	±100	-55 ~ 155	Moisture Resistant	Tape & Reel (TR)
RMCF0603FT130R	Stackpole Electronics Inc	130 Ω	±1%	0.1	0603	±100	-55 ~ 155	Automotive AEC-Q200	Tape & Reel (TR)
ERJ-3EKF1300V	Panasonic Electronic Components	130 Ω	±1%	0.1	0603	±100	-55 ~ 155	Automotive AEC-Q200	Tape & Reel (TR)
ERJ-3GEYJ131V	Panasonic Electronic Components	130 Ω	±5%	0.1	0603	±200	-55 ~ 155	Automotive AEC-Q200	Tape & Reel (TR)
RC0603FR-07130RL	YAGEO	130 Ω	±1%	0.1	0603	±100	-55 ~ 155	Moisture Resistant	Cut Tape (CT) & Digi-Reel®
RMCF0603JT130R	Stackpole Electronics Inc	130 Ω	±5%	0.1	0603	±200	-55 ~ 155	Automotive AEC-Q200	Tape & Reel (TR)

Engineering Selection Recommendations

Direct Equivalents (Same Tolerance, Same Manufacturer Features): RC0603JR-07130RL (YAGEO) provides direct functional equivalence with ±5% tolerance matching the RC1608J131CS. Both components share identical electrical specifications, operating temperature range, and moisture-resistant thick film composition. Selection between these parts depends on packaging format preference (Cut Tape vs. Tape & Reel) and supply availability.

Upgraded Precision Alternatives (±1% Tolerance): RC1608F131CS (Samsung Electro-Mechanics), RC0603FR-07130RL (YAGEO), RMCF0603FT130R (Stackpole Electronics Inc), and ERJ-3EKF1300V (Panasonic Electronic Components) all provide ±1% tolerance specifications. These parts are suitable for applications requiring tighter resistance control while maintaining all other electrical and environmental parameters. All four parts maintain RoHS3 compliance and MSL 1 rating.

Automotive-Qualified Alternatives: RMCF0603FT130R, ERJ-3EKF1300V, RMCF0603JT130R, and ERJ-3GEYJ131V carry AEC-Q200 automotive qualification. These parts are appropriate for automotive applications or designs requiring enhanced reliability certification. RMCF0603FT130R and ERJ-3EKF1300V combine ±1% tolerance with AEC-Q200 qualification. RMCF0603JT130R and ERJ-3GEYJ131V maintain ±5% tolerance with AEC-Q200 qualification and ±200ppm/°C temperature coefficient.

Product Status and Compliance: All listed substitute parts maintain Active product status and full RoHS3 compliance. No parts are obsolete or restricted. Moisture Sensitivity Level 1 (Unlimited) is consistent across all alternatives, indicating no special moisture handling requirements during storage or assembly.

Frequently Asked Questions (FAQ)

Q: Can RC0603JR-07130RL replace RC1608J131CS directly? A: Yes. RC0603JR-07130RL is a direct equivalent with matching 130 Ohm ±5% specifications, 0.1W power rating, 0603 package, and -55°C ~ 155°C operating range. The primary difference is manufacturer (YAGEO vs. Samsung Electro-Mechanics) and packaging format (Tape & Reel vs. Cut Tape). Both are RoHS3 compliant with MSL 1 rating.

Q: What is the difference between ±5% and ±1% tolerance parts? A: Tolerance defines the maximum allowable deviation from the nominal 130 Ohm resistance value. ±5% tolerance allows resistance between 123.5 and 136.5 Ohms. ±1% tolerance restricts resistance between 128.7 and 131.3 Ohms. Applications requiring precise resistance control benefit from ±1% parts. General-purpose circuits typically function with ±5% tolerance.

Q: Are AEC-Q200 qualified parts necessary for non-automotive applications? A: No. AEC-Q200 qualification indicates enhanced reliability testing and is required for automotive designs. Non-automotive applications function with standard industrial-grade parts. AEC-Q200 qualified parts (RMCF0603FT130R, ERJ-3EKF1300V, RMCF0603JT130R, ERJ-3GEYJ131V) are compatible with non-automotive designs but may incur higher cost.

Q: Does package format (Cut Tape vs. Tape & Reel) affect electrical performance? A: No. Cut Tape (CT) and Tape & Reel (TR) formats are packaging and delivery methods only. Electrical specifications, performance, and reliability are identical. Selection depends on assembly equipment compatibility and procurement workflow.

Q: Can I substitute a ±1% part for a ±5% specification? A: Yes. A ±1% tolerance part meets or exceeds ±5% tolerance requirements. The ±1% part provides tighter resistance control and is functionally compatible with designs specified for ±5% tolerance. This represents an upgrade path.

Q: What is the significance of temperature coefficient (±100ppm/°C vs. ±200ppm/°C)? A: Temperature coefficient defines resistance change per degree Celsius across the operating range. ±100ppm/°C indicates lower temperature-induced resistance drift compared to ±200ppm/°C. Applications with strict temperature stability requirements benefit from ±100ppm/°C parts. Both coefficients are acceptable within the -55°C ~ 155°C operating range for general applications.

Q: Are all substitute parts RoHS3 compliant? A: Yes. All listed substitute parts maintain RoHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the RC1608J131CS environmental and regulatory status.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message