Equivalent & Substitute Parts for RC1608J111CS

Part Overview

The RC1608J111CS is a 110 Ohms ±5% 0.1W thick film chip resistor manufactured by Samsung Electro-Mechanics in 0603 (1608 Metric) package format. This component is classified as Active product status with full RoHS3 compliance and unlimited moisture sensitivity level (MSL 1). The part is supplied in Tape & Reel packaging and is currently in stock with 1170 units available.

Equivalent and substitute parts are necessary when the original manufacturer part becomes unavailable, when supply chain constraints require alternative sourcing, or when design specifications allow for compatible alternatives with enhanced performance characteristics such as improved tolerance or automotive-grade qualification.

Key Parameters

Parameter	Value
Resistance	110 Ohms
Tolerance	±5%
Power Rating	0.1W (1/10W)
Package / Case	0603 (1608 Metric)
Composition	Thick Film
Operating Temperature Range	-55°C ~ 155°C
Temperature Coefficient	±100ppm/°C
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)
Number of Terminations	2

Substitute Part Grouping Explanation

Substitution eligibility for the RC1608J111CS is determined by strict equivalence across the following critical parameters:

Mandatory Matching Parameters:

Resistance value: 110 Ohms
Package / Case: 0603 (1608 Metric)
Power Rating: 0.1W (1/10W)
Composition: Thick Film
Operating Temperature Range: -55°C ~ 155°C
Number of Terminations: 2
RoHS3 Compliance
Moisture Sensitivity Level: 1 (Unlimited)

Allowable Variation Parameters:

Tolerance: ±5% (primary specification) or ±1% (enhanced tolerance acceptable as upgrade)
Temperature Coefficient: ±100ppm/°C (primary) or ±200ppm/°C (acceptable variation)
Packaging format: Tape & Reel (TR) or Cut Tape (CT) & Digi-Reel®
Features: Moisture Resistant (standard) or Automotive AEC-Q200 (enhanced qualification)

All substitute parts listed maintain full electrical and mechanical compatibility with the RC1608J111CS while meeting or exceeding the specified performance envelope.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Resistance	Tolerance	Power (W)	Temp Coeff (ppm/°C)	Package	Features	Product Status	Inventory
RC1608J111CS	Samsung Electro-Mechanics	110 Ω	±5%	0.1	±100	0603	Moisture Resistant	Active	1170
RC0603JR-07110RL	YAGEO	110 Ω	±5%	0.1	±100	0603	Moisture Resistant	Active	254296
RMCF0603FT110R	Stackpole Electronics Inc	110 Ω	±1%	0.1	±100	0603	Automotive AEC-Q200	Active	531077
ERJ-3EKF1100V	Panasonic Electronic Components	110 Ω	±1%	0.1	±100	0603	Automotive AEC-Q200	Active	164116
ERJ-3GEYJ111V	Panasonic Electronic Components	110 Ω	±5%	0.1	±200	0603	Automotive AEC-Q200	Active	98405
MCR03ERTJ111	Rohm Semiconductor	110 Ω	±5%	0.1	±200	0603	Standard	Discontinued at DiGi Electronics	798
RC0603FR-07110RL	YAGEO	110 Ω	±1%	0.1	±100	0603	Moisture Resistant	Active	5300
RMCF0603JT110R	Stackpole Electronics Inc	110 Ω	±5%	0.1	±200	0603	Automotive AEC-Q200	Active	5747

Engineering Selection Recommendations

Direct Equivalent (Same Tolerance & Temperature Coefficient):

RC0603JR-07110RL from YAGEO provides direct electrical equivalence to the RC1608J111CS with identical tolerance (±5%) and temperature coefficient (±100ppm/°C). This part maintains the same moisture-resistant thick film composition and is available in significantly higher inventory (254,296 units). Both parts are Active status with full RoHS3 compliance and MSL 1 rating.

Enhanced Tolerance Upgrade (±1% Tolerance):

RC0603FR-07110RL (YAGEO), RMCF0603FT110R (Stackpole Electronics Inc), and ERJ-3EKF1100V (Panasonic Electronic Components) offer improved tolerance specification at ±1% while maintaining the ±100ppm/°C temperature coefficient. These parts are suitable for applications requiring tighter resistance accuracy. All three are Active status with full compliance certifications.

Automotive-Grade Alternatives (AEC-Q200 Qualified):

RMCF0603FT110R, ERJ-3EKF1100V, ERJ-3GEYJ111V, and RMCF0603JT110R carry automotive AEC-Q200 qualification. These parts are appropriate for automotive and high-reliability applications. RMCF0603FT110R and ERJ-3EKF1100V combine AEC-Q200 qualification with ±1% tolerance and ±100ppm/°C temperature coefficient. ERJ-3GEYJ111V and RMCF0603JT110R maintain ±5% tolerance with AEC-Q200 qualification but feature ±200ppm/°C temperature coefficient.

Discontinued Part:

MCR03ERTJ111 from Rohm Semiconductor is discontinued at DiGi Electronics and should not be selected for new designs despite remaining inventory of 798 units. This part carries ±5% tolerance and ±200ppm/°C temperature coefficient with standard thick film composition.

Frequently Asked Questions (FAQ)

Q: Can RC0603JR-07110RL directly replace RC1608J111CS without circuit redesign?

A: Yes. RC0603JR-07110RL is a direct equivalent with identical electrical specifications (110 Ohms ±5%, 0.1W, ±100ppm/°C) and mechanical package (0603). Both parts are RoHS3 compliant with MSL 1 rating. No circuit redesign is required.

Q: What is the difference between ±5% and ±1% tolerance options?

A: Tolerance defines the acceptable resistance variation from the nominal 110 Ohm value. ±5% tolerance allows variation between 104.5 and 115.5 Ohms. ±1% tolerance restricts variation to 108.9 and 111.1 Ohms. Applications requiring precise resistance values should specify ±1% tolerance parts such as RC0603FR-07110RL, RMCF0603FT110R, or ERJ-3EKF1100V.

Q: Are automotive-grade parts (AEC-Q200) suitable for non-automotive applications?

A: Yes. Automotive-grade parts meet or exceed standard industrial specifications and are fully compatible with non-automotive applications. AEC-Q200 qualified parts such as RMCF0603FT110R and ERJ-3EKF1100V provide enhanced reliability margins and are appropriate for high-reliability or mission-critical applications.

Q: What is the significance of temperature coefficient (±100ppm/°C vs ±200ppm/°C)?

A: Temperature coefficient specifies how resistance changes with temperature. ±100ppm/°C indicates lower temperature-induced resistance drift compared to ±200ppm/°C. For applications with wide operating temperature ranges or requiring stable resistance across temperature extremes, parts with ±100ppm/°C such as RC1608J111CS, RC0603JR-07110RL, RC0603FR-07110RL, RMCF0603FT110R, and ERJ-3EKF1100V are preferred.

Q: Does packaging format (Tape & Reel vs Cut Tape) affect electrical performance?

A: No. Packaging format affects only handling, storage, and assembly logistics. Tape & Reel (TR) and Cut Tape (CT) & Digi-Reel® formats contain identical components with identical electrical specifications. Selection should be based on manufacturing equipment compatibility and supply chain requirements.

Q: Why is MCR03ERTJ111 marked as discontinued?

A: MCR03ERTJ111 is discontinued at DiGi Electronics, indicating reduced manufacturer support and limited future availability. New designs should not incorporate this part. Alternative sources such as RC0603JR-07110RL, RC0603FR-07110RL, RMCF0603FT110R, or ERJ-3EKF1100V provide equivalent or superior specifications with active product status and assured long-term availability.

Q: What does MSL 1 (Unlimited) moisture sensitivity level mean?

A: MSL 1 indicates the component has unlimited shelf life and requires no special moisture control during storage or handling. All listed substitute parts carry MSL 1 rating, ensuring compatibility with standard manufacturing environments and storage conditions.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message