RC1608F95R3CS Equivalent & Substitute Parts Reference

Part Overview

The RC1608F95R3CS is a 95.3 Ohm ±1% thick film chip resistor manufactured by Samsung Electro-Mechanics, rated at 0.1W (1/10W) power dissipation in a 0603 (1608 Metric) surface mount package. This component is classified as Active product status with moisture resistant characteristics and RoHS3 compliance. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical dimensions, and environmental ratings to ensure direct circuit board compatibility and functional interchangeability.

Substiute Parts

RC1608F95R3CS

Samsung Electro-MechanicsIn Stock: 897RC1608F95R3CS Datasheet

Current PartRFQ

RC0603FR-0795R3L

YAGEOIn Stock: 45410RC0603FR-0795R3L Datasheet

DirectRFQ

MCR03ERTF95R3

Rohm SemiconductorIn Stock: 3541MCR03ERTF95R3 Datasheet

UpgradeRFQ

CRCW060395R3FKEA

Vishay DaleIn Stock: 1956CRCW060395R3FKEA Datasheet

SimilarRFQ

ERJ-3EKF95R3V

Panasonic Electronic ComponentsIn Stock: 58392ERJ-3EKF95R3V Datasheet

SimilarRFQ

RMCF0603FT95R3

Stackpole Electronics IncIn Stock: 5974RMCF0603FT95R3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the RC1608F95R3CS are qualified based on the following critical parameters that determine functional and mechanical interchangeability:

Electrical Parameters:

• Resistance value: 95.3 Ohms (exact match required)
• Tolerance: ±1% (exact match required)
• Power rating: 0.1W / 1/10W (exact match required)
• Temperature coefficient: ±100ppm/°C (exact match required)
• Operating temperature range: -55°C ~ 155°C (exact match required)

Mechanical Parameters:

• Package type: 0603 (1608 Metric) (exact match required)
• Composition: Thick Film (exact match required)
• Number of terminations: 2 (exact match required)

Compliance Parameters:

• RoHS3 compliance (required for all substitutes)
• MSL rating: 1 (Unlimited) (required for all substitutes)

All substitute parts listed meet these criteria and are therefore electrically and mechanically equivalent to the RC1608F95R3CS for direct replacement in circuit applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute (Direct Equivalent): RC0603FR-0795R3L from YAGEO is the recommended primary substitute. This part maintains Active product status, identical electrical and mechanical specifications, moisture resistant characteristics, and RoHS3 compliance. High inventory availability (45,342 pcs) supports supply chain continuity.

Secondary Substitutes (Active Status with Enhanced Ratings): CRCW060395R3FKEA (Vishay Dale), ERJ-3EKF95R3V (Panasonic), and RMCF0603FT95R3 (Stackpole Electronics) are qualified substitutes with Active product status. These parts include Automotive AEC-Q200 certification, which provides additional qualification for automotive and high-reliability applications. All three maintain identical core electrical parameters and RoHS3 compliance.

Discontinued Alternative: MCR03ERTF95R3 from Rohm Semiconductor meets all electrical and mechanical equivalence criteria but carries Discontinued at DiGi Electronics status. This part should be used only when supply of active alternatives is unavailable and existing inventory is confirmed.

All listed substitutes are suitable for direct circuit board replacement without design modification, provided that the application does not require specific manufacturer qualification or supply chain continuity requirements.

Frequently Asked Questions (FAQ)

Q: Can RC0603FR-0795R3L replace RC1608F95R3CS in existing designs? A: Yes. RC0603FR-0795R3L is electrically and mechanically equivalent. Both parts share identical resistance (95.3 Ω), tolerance (±1%), power rating (0.1W), package (0603), temperature coefficient (±100ppm/°C), operating range (-55°C ~ 155°C), and RoHS3 compliance. Direct substitution is supported without circuit modification.

Q: What is the difference between standard and automotive-qualified substitutes? A: CRCW060395R3FKEA, ERJ-3EKF95R3V, and RMCF0603FT95R3 carry Automotive AEC-Q200 certification, indicating qualification for automotive applications with enhanced reliability testing. The RC1608F95R3CS and RC0603FR-0795R3L do not carry this certification. For non-automotive applications, all five active substitutes are functionally equivalent. For automotive designs, AEC-Q200 certified parts provide additional qualification assurance.

Q: Are there dimensional differences between substitute parts? A: Minor dimensional variations exist within tolerance. RC1608F95R3CS, RC0603FR-0795R3L, and ERJ-3EKF95R3V share identical dimensions (0.063" L x 0.031" W, 1.60mm x 0.80mm). CRCW060395R3FKEA and RMCF0603FT95R3 have slightly reduced length (0.061" / 1.55mm) and width variations (0.033" / 0.85mm for CRCW, 0.031" / 0.80mm for RMCF). Height differences are minimal (0.022" / 0.55mm standard vs. 0.020" / 0.50mm for CRCW). These variations remain within 0603 package tolerance and do not affect PCB assembly compatibility.

Q: Why is MCR03ERTF95R3 listed if it is discontinued? A: MCR03ERTF95R3 meets all electrical and mechanical equivalence criteria and remains in inventory (3,527 pcs). It is included as a reference for existing designs currently using this part. For new designs or replenishment, active alternatives (RC0603FR-0795R3L, CRCW060395R3FKEA, ERJ-3EKF95R3V, RMCF0603FT95R3) are recommended to ensure long-term supply availability.

Q: What does MSL 1 (Unlimited) mean for these resistors? A: MSL 1 (Unlimited) indicates the lowest moisture sensitivity level. These parts do not require special moisture control during storage, handling, or assembly. Standard PCB assembly processes and storage conditions are acceptable without desiccant packaging or baking procedures.

Q: Are all substitutes RoHS3 compliant? A: Yes. All listed substitute parts carry RoHS3 compliance certification, matching the RC1608F95R3CS. This ensures compliance with European Union Restriction of Hazardous Substances regulations and equivalent global standards.